HUANANZHI X58-RX3.0 Motherboard User Manual

Safety Precautions

Please follow these precautions to ensure successful computer assembly and safe operation:

• Components may be damaged by electrostatic discharge (ESD). Take appropriate measures.
• Ensure all components are firmly connected. Loose connections can lead to failure in recognizing components or starting the computer.
• To prevent ESD damage, discharge your body static by touching metal objects before handling the motherboard.
• Hold the motherboard by its edges. Avoid touching sensitive components.
• When not installed, store the motherboard in an anti-static container or on an anti-static pad.
• Before powering on the computer, ensure all internal components are securely connected and free from loose screws or metal parts.
• Do not start the computer before installation is complete, as this may cause permanent damage to components or injury.
• For installation assistance, contact HUANANZHI customer service or email bussiness@huananzhi.com.
• Before installation or disassembly, switch off the power and disconnect the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep this user manual for future reference.
• Ensure the power socket provides the correct voltage for the power supply.
• Keep the motherboard and power cable in a safe place, away from being stepped on.
• If the computer experiences liquid penetration, exposure to moisture, fails to work after following instructions, or shows signs of physical damage (e.g., dropped), have it checked by a service technician.

Packing

Please confirm the motherboard packaging is intact upon purchase. If there is any damage or missing accessories, contact HUANANZHI customer service promptly.

Included items:

• 1 x HUANANZHI X58-RX3.0 Motherboard
• 1 x SATA data cable
• 1 x I/O shield backplate
• 1 x User manual
• 1 x Warranty card

Brief Introduction & Features

The HUANANZHI X58-RX3.0 is a motherboard designed for LGA1366 series processors.

Features:

• CPU Support: LGA1366 series processors.
• RAM Support: Four channels of DDR3 1333/1066MHz, supporting both standard and ECC memory.
• I/O Attributes:
  • 4 x SATA2.0 ports (Max data transmission rate of 3GB/s)
  • 6 x USB2.0 ports
  • 2 x USB3.0 ports
  • 1 x RJ45 Gigabit Ethernet port
  • 1 x Audio interface
• HD AUDIO Sound Effect: Supports 5.1 channel HI-FI audio input/output (ALC662). Provides audio input, microphone, front speaker, rear speaker, and side speaker output ports. The front speaker output port is for stereo speakers or earphones.
• Onboard NIC: Gigabit Ethernet interface.
• Expansion Slots:
  • 1 x PCI Express x16 slot (for graphics cards)
  • 1 x PCI Express x1 slot
  • 1 x PCI slot

Motherboard Diagram

The motherboard layout includes:

• CPU Socket: LGA1366 socket.
• Memory Slots: DDR3 slots (typically 2 or 4).
• Expansion Slots: PCI Express x16, PCI Express x1, and PCI slots.
• Storage Connectors: SATA2.0 ports for connecting hard drives and SSDs.
• Power Connectors: 24-pin ATX main power connector and potentially an additional CPU power connector.
• Fan Headers: 3-pin or 4-pin connectors for CPU and system fans.
• Front Panel Connectors: Headers for power button (POWER SW), reset button (RESET SW), power LED (POWER LED), HDD LED, and front panel audio (JAUDI).
• Chipset: The X58 chipset.
• CMOS Battery: A small coin-cell battery holder for maintaining BIOS settings.
• USB Headers: Front panel USB 2.0 and USB 3.0 headers.

Rear I/O Panel

The rear I/O panel provides connectivity for external devices:

• PS/2 Ports: For keyboard and mouse.
• USB Ports: Multiple USB 2.0 and USB 3.0 ports for connecting peripherals.
• LAN Port: RJ45 Gigabit Ethernet port for network connectivity.
• Audio Ports: Multiple 3.5mm jacks for audio input, output, and microphone.

LAN Port Status Table:

Audio Port Configuration:

• Audio Port (Green): Typically for Audio Output / Front speaker output.
• Audio Input (Blue): For Line-in audio input.
• Microphone Input (Pink): For microphone connection.

Installation and Settings

Note: Always check the motherboard for pin markings (e.g., "1" or a white bold line) to identify pin 1 for correct connector orientation.

Component Installation:

CPU Installation:

To correctly place the LGA1366 CPU, align the CPU with the socket. The CPU surface has two pairs of alignment points and a golden triangle indicator, which points to Pin 1.

Memory Installation:

1. Pull the clips on both ends of the memory slot outwards.

2. Align the memory module with the slot, ensuring the notch on the module matches the protrusion in the slot.

3. Press down firmly on the memory module until the clips on both ends automatically snap into place.

Graphics Card Installation:

1. Use a screwdriver to remove the corresponding expansion slot cover (bezel) and screws from the computer case.

2. Open the retention clip on the PCIe x16 slot.

3. Insert the graphics card firmly into the PCIe x16 slot.

4. Once seated, the retention clip will automatically lock the card in place.

5. Secure the graphics card to the chassis using screws.

6. Connect the necessary power cables to the graphics card.

SATA Interface:

The motherboard features multiple SATA 2.0 ports for connecting storage devices like hard drives and SSDs.

Connector Pinouts:

Clear CMOS Jumper (CLR-CMOS):

This jumper is used to reset BIOS settings to default values. Typically involves moving a jumper cap between pins.

• Pin 1-2: Normal operation
• Pin 2-3: Clear CMOS

Front Audio Output Ports (JAUDI):

Connects front panel audio jacks:

Expansion Ports (USB Headers):

Connectors for additional USB ports:

PCI Expansion Slots:

Includes PCI Express x16, PCI Express x1, and PCI slots for expansion cards.

F_PANEL1 (Front Panel) Interface:

Connects the computer case's power button, reset button, and indicator LEDs:

USB3.0 Interface:

Connectors for front panel USB 3.0 ports:

Drivers Installation

Drivers Listing:

Intel Chip Information Installation:

1. Navigate to Control Panel -> System -> Hardware -> Device Manager.

2. Right-click on the hardware device that needs a driver update.

3. Select "Update driver".

4. Choose "Do not connect to Internet" and then "Manually installation".

5. Browse to the location of the driver files.

6. Select "Next step" to proceed with the installation.

Audio Driver Installation:

Before installing audio drivers, identify the audio chip model on your motherboard (refer to this manual for location). Select the appropriate driver for installation.

Audio Driver Installation (HD Audio Series Example):

1. Run the installer: Navigate to the driver directory (e.g., `/X58 HD AUDIO/Vista_Win7_R267/WDM_R267.exe`).

2. Click "Next" to continue.

3. Click "Finished" to complete the installation. The system will automatically restart.

Uninstallation of Audio Driver (HD Audio Example):

1. Boot into Windows desktop.

2. Go to "Settings" -> "Control Panel".

3. Select "Add/Remove Programs".

4. Find and select "Realtek High Definition Audio Driver".

5. Click "Add/Remove" to uninstall the driver.

External Video Card Driver Installation:

1. Run the driver installer (e.g., `Setup.exe`).

2. Follow the on-screen prompts, clicking "Next", "Yes", "Next", "Next", and finally "Finished".

3. The system will automatically search for devices to complete the installation.

Network Driver Installation:

1. Run the network driver installer (e.g., `X58 LAN/WIN7/XP/setup.exe`).

2. Click "Next", then "Installation", and finally "Finished".

3. Restart the computer. The system will automatically detect and install the network devices.

BIOS Settings

The CMOS SETUP stores system configuration data. When the computer starts POST (Power-On Self Test), press the "Delete" key to enter the AMI BIOS CMOS SETUP main page. The warm boot key is "F7".

Pay attention to the menu options. A triangle symbol (▶) indicates a sub-menu will appear when selected.

Main Menu Functions:

• Main: System Overview (displays date/time, HDD specs, monitor type).
• Advanced: Advanced Settings (includes settings like virus alert, boot device priority).
• Chipset: Advanced Chipset Settings.
• Boot: Boot Settings (configures boot order and options).
• Security: Security Settings (allows setting BIOS passwords).
• Save: Save Setting (saves current BIOS configuration).
• Exit: Exit Options (includes loading optimized defaults, loading fail-safe defaults, discarding changes, or exiting without saving).