Kasa Filament Smart Bulb User Guide

About This Guide

This guide provides a brief introduction to the Smart Bulb and the Kasa Smart app, along with regulatory information. Please note that features may vary slightly by model and software version. All images, parameters, and descriptions are examples and may not reflect your actual experience.

Conventions

Support

• Specifications can be found on the product page at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.

Introduction

The Smart Bulb is part of the Kasa smart home family, offering integration with plugs, switches, and cameras. Users can adjust brightness, track energy consumption, set schedules and timers, and simulate sunrise alarms. Grouping lights allows for easier control and custom scene creation. Multiple smart home devices can be controlled via the Kasa app or voice commands, making home management convenient.

Key Features:

• No Hub Required: Screws in like an ordinary bulb. Requires Kasa Smart app and Wi-Fi connection.
• Scheduling: Set bulbs to turn on/off automatically when home or away.
• Energy Saving: Reduces power usage without compromising light quality.
• Voice Control: Compatible with Amazon Echo, Dot, Tap, and Google Assistant.
• Remote Control: Easily set up and control bulbs from anywhere using the Kasa Smart app.

Available Models:

• KL50: Dimmable, Soft White. Offers a dimming range from 1%-100% for any occasion.
• KL60: Dimmable, Warm Amber. Offers a dimming range from 1%-100% for any occasion.

Set Up Your Smart Bulb

Follow these steps to set up your smart bulb using the Kasa Smart app:

1. Step 1: Download Kasa

   Get the Kasa Smart app from the App Store or Google Play.

   [App Store] [Google Play]

2. Step 2: Log In

   Open the app and log in with your TP-Link ID. Create an account if you don't have one.

3. Step 3: Add Device

   Tap the [+] button in the Kasa Smart app. Select 'Add a Device' > 'Smart Lights' > 'Filament LED Bulb'. Follow the app instructions to complete the setup.

Main Device Controls

After setup, the Kasa Smart app's 'Devices' page lists your smart bulbs. Tap a bulb to access its specific page for detailed configuration.

Devices Page:

Lists your smart bulbs and other smart home devices. Allows instant turning on/off.

Smart Bulb Page:

Provides detailed configuration options for your bulb, including Power, Brightness, Presets, Schedule, and Usage.

[Screenshot description: A mobile app interface showing a list of devices and a detailed bulb control screen with power, brightness, and other options.]

Configure Your Smart Bulb

On the Smart Bulb page, you can adjust light temperature, set schedules, track energy consumption, and change settings.

Presets and Recents:

Tap to add presets and apply recently used settings to your smart bulb.

[Screenshot description: App interface showing presets and recent settings for bulb brightness.]

Create Event (Scheduling):

Set schedules for your smart bulb to automate daily routines with On/Off actions. You can set specific times and repeating days.

[Screenshot description: App interface for creating a schedule event, showing time, on/off status, and repeat options.]

Usage:

View and track energy consumption details, including daily and predicted yearly savings compared to a standard 60W bulb.

[Screenshot description: App interface showing energy usage statistics.]

Device Settings:

Change device settings, including name and icon. Configure default states for when the bulb is turned on via the app or power source. Options include 'Last "ON" State'. Advanced settings and device information are also available, along with an option to remove the device.

[Screenshot description: App interface for device settings, showing name, default states, and advanced options.]

Create Scenes

A scene is a preset group of smart devices programmed, customized, and activated simultaneously with a single touch. Scenes allow you to easily set your mood, activity, or prepare for special occasions by automating your smart home devices.

Example scenes include:

• Good Morning: Get ready for the day by turning on devices.
• Good Night: Turn everything off before bedtime.
• Movie Night: Dim the lights for showtime.
• Custom: Create your own personalized scene.

Discover Kasa

Integrate your Smart Bulb with voice assistants like Amazon Alexa or Google Home Assistant for a hands-free experience. Kasa also works with Samsung SmartThings to trigger changes based on your arrival or departure.

To set up integrations, launch the Kasa Smart app and navigate to 'Add Device' > 'WORKS WITH KASA' > 'Amazon Alexa / Google Assistant / Samsung SmartThings' for detailed instructions.

Authentication

Copyright & Trademarks

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks of their respective holders. Reproduction or derivative use of specifications requires permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.

Compliance Information

FCC Compliance Information Statement

Product Name: Kasa Filament Smart Bulb

Model Number: KL50 / KL60

Component Name: Kasa Light Wi-Fi Module, Model: KLM100, FCC ID: TE7KLM100

Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234, Fax: +1 909 527 6803, E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee against interference in a particular installation. If interference occurs, users are encouraged to try correcting it by:

• Increasing separation between equipment and receiver.
• Connecting to a different circuit than the receiver.
• Consulting a dealer or experienced radio/TV technician.

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: Manufacturer is not responsible for radio/TV interference caused by unauthorized modifications.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits for an uncontrolled environment. The device and its antenna must not be co-located or operating with any other antenna or transmitter. Antennas must be installed to provide at least 20 cm separation from persons. TP-Link USA Corporation has determined that the equipment complies with applicable technical standards and FCC part 15.

Issue Date: 2019-09-01

CE Mark Warning

This is a Class B product. In a domestic environment, it may cause radio interference, requiring user action.

OPERATING FREQUENCY (maximum transmitted power): 2412 MHz -2472 MHz (20dBm). No restrictions on use in EU member states and EFTA countries.

EU Declaration of Conformity

TP-Link declares compliance with essential requirements of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original declaration is available at https://www.tp-link.com/en/ce.

RF Exposure Information (EU):

This device meets EU requirements (2014/53/EU Article 3.1a) for limiting public exposure to electromagnetic fields. Compliance is met when the device is used at 20 cm from the body.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) complying with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: 1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation.

French Translation: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement (IC):

This equipment complies with IC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

French Translation: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement: CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意! 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。

BSMI Notice

安全諮詢及注意事項:

• 請使用原裝電源供應器或只能按照本產品說明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮,請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。
• 請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項工作。

RoHS Compliance Statement

限用物質含有情況標示聲明書

備考 1. "超出 0.1 wt %" 及 "超出 0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。

備考 2. "○" 系指該項限用物質之百分比含量未超出百分比含量基準值。

備考 3. "-" 系指該項限用物質為排除項目。

Ukrainian Certification

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.

[EAC Mark]

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• Only use the control provided with or specified by these instructions.

Please read and follow the safety information. TP-Link cannot guarantee against accidents or damage due to improper use. Use this product with care and at your own risk.

WARNING:

RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to change it.

• Do not install the Smart Bulb with wet hands or when standing on wet or damp surfaces.
• Compatible with regular light switches. Not suitable for standard in-wall dimmers, photosensors, motion sensors, or timers. Dimmable via the app only.
• NOT for use in totally enclosed or recessed luminaires. Suitable for damp locations.
• NOT FOR EMERGENCY LIGHTING.
• Increased weight may reduce mechanical stability of luminaires and lampholders.

Specifications:

• Operating Temperature: -15°C~40°C (5°F~104°F)
• Storage Temperature: -20°C~70°C (-4°F~158°F)
• Operating Humidity: 10%~90%RH, Non-condensing
• Storage Humidity: 10%~90%RH, Non-condensing

Explanation of Symbols on Product Label