EK-Quantum Surface Radiator Setup Configurations

User Guide

Important Safety and Installation Information

Please note that the installation of this product is intended for adequately trained and experienced persons. Installation is undertaken at your own risk. If you are not properly trained or experienced, or feel unsure about the installation procedure, please refrain from installing the product yourself and contact EKWB tech support for assistance. EKWB disclaims liability for any damages to the product, including incidental, consequential, or indirect damages, incurred due to improper or inappropriate installation.

Before using this product, please follow these basic guidelines:

Carefully read the manual before beginning the installation process.
EK Fittings require only a small amount of force to screw them firmly in place, as the liquid seal is ensured by rubber O-ring gaskets.
The use of quality, market-proven corrosion-inhibiting coolants is always strongly recommended for any liquid cooling system.
Do not use pure distilled water as a cooling liquid. For best results, EKWB recommends the use of EK-CryoFuel Coolants.

EK-Quantum Surface Radiators: Overview

EK-Quantum Surface Radiators feature a classical U-shape coolant flow, with inlet and outlet ports located on the same side of the radiator. Users can choose which port serves as the inlet and which as the outlet within their custom loop.

Setup Configurations

Setup 1: Illustrates the first flow direction setup for an EK-Quantum Surface P360M Radiator, which is a multiport radiator. For non-multiport radiators, users can select one inlet and one outlet port from the available options.

Diagram Description: A radiator is shown with two ports on one side. Arrows indicate coolant entering one port (labeled "INLET OPTIONS") and exiting another (labeled "OUTLET OPTIONS") on the same side. This configuration is labeled "SETUP 1".

Setup 2: Illustrates the second flow direction setup for an EK-Quantum Surface P360M Radiator, also a multiport radiator. Similar to non-multiport radiators, one inlet and one outlet port can be chosen.

Diagram Description: Similar to Setup 1, but the arrows show coolant flowing in the reverse direction between the two ports on the same side. This configuration is labeled "SETUP 2".

Important Recommendations and Features

EKWB recommends using the same number of inlets and outlets for optimal performance.
It is mandatory to use the provided extenders on any inlet and outlet position.
If extenders are transferred from their stock position to another, ensure they are tightened to avoid leakage.
The same port setup applies to all EK-Quantum Surface radiator variants.

Fill/Drain Port (Multiport Radiators)

On multiport radiators, there is an additional port located opposite the inlet/outlet side. This port is intended for filling or draining the loop.

Diagram Description: A radiator is shown with a port clearly marked as "FILL/DRAIN PORT" on the side opposite the main inlet/outlet ports.

Note: This fill/drain port should not be used as an inlet or an outlet port.

Exploded View of Removable Components (S, P, and X Series)

The following sections detail the removable components for the EK-Quantum Surface S, P, and X series radiators.

EK-Quantum Surface S Series

Diagram Description: An exploded view shows the components of an EK-Quantum Surface S Series radiator (e.g., EK-Quantum Surface S240). Components include:

2x QUANTUM SURFACE END TANK SHROUD (ALUMINIUM)
2x QUANTUM SURFACE SIDE PLATE (STAINLESS STEEL)
2x QUANTUM SURFACE EXTENDER
8x TORX SCREW M3 x 6 mm
QUANTUM SURFACE TANK

EK-Quantum Surface P Series

Diagram Description: An exploded view shows the components of an EK-Quantum Surface P Series radiator (e.g., EK-Quantum Surface P360M). Components include:

2x QUANTUM SURFACE END TANK SHROUD (ALUMINIUM)
2x QUANTUM SURFACE SIDE PLATE (STAINLESS STEEL)
2x QUANTUM SURFACE EXTENDER
8x TORX SCREW M3 x 6 mm
3x QUANTUM SURFACE PLUG (MULTIPORT VERSION)
QUANTUM SURFACE TANK

EK-Quantum Surface X Series

Diagram Description: An exploded view shows the components of an EK-Quantum Surface X Series radiator (e.g., EK-Quantum Surface X420M). Components include:

2x QUANTUM SURFACE END TANK SHROUD (ALUMINIUM)
2x QUANTUM SURFACE SIDE PLATE (STAINLESS STEEL)
2x QUANTUM SURFACE EXTENDER
8x TORX SCREW M3 x 6 mm
3x QUANTUM SURFACE PLUG (MULTIPORT VERSION)
QUANTUM SURFACE TANK

Support and Service

For assistance, please contact EKWB:

Website: https://www.ekwb.com/customer-support/

Company: EKWB d.o.o.
Address: Pod lipami 18, 1218 Komenda, Slovenia - EU

Social Media

Connect with EKWB on social media:

Facebook: EKWaterBlocks
Twitter: @EKWaterBlocks
Instagram: ekwaterblocks
YouTube: EKWBofficial
Pinterest: ekwaterblocks

	EK-Quantum Surface Radiator Setup Configurations User guide for EK-Quantum Surface Radiators, detailing setup configurations, exploded views of components for S, P, and X series, and support information.
	EK-Quantum Surface Radiator Setup Configurations - User Guide \| EKWB Detailed user guide for EK-Quantum Surface Radiators (S, P, X series). Covers setup configurations, installation tips, component breakdowns, and support information from EKWB.
	EK-Quantum Surface Radiator Setup Configurations - User Guide Detailed user guide for EK-Quantum Surface Radiators, covering setup configurations, exploded views of components for S, P, and X series, and support information. Learn how to install and configure your EK-Quantum Surface radiator for optimal performance in your custom liquid cooling loop.
	EK-Quantum Surface Radiator Setup Configurations - User Guide This user guide provides detailed setup configurations, flow direction options, and component breakdowns for EKWB's EK-Quantum Surface Radiators, including S, P, and X series. It covers installation guidelines, port usage, and support information.
	EK-Quantum Surface Radiator Setup Configurations User Guide Comprehensive user guide for EK-Quantum Surface Radiators, detailing setup configurations, exploded views of S, P, and X series components, and support information.
	EK-Quantum Surface Radiator Setup Configurations Guide A guide to the setup configurations for EK-Quantum Surface Radiators, including S, P, and X series. Details on installation, components, and best practices for liquid cooling systems.
	EK-Quantum Surface Radiator Setup Configurations User Guide This user guide provides setup configurations for EK-Quantum Surface Radiators, including S, P, and X series. It details radiator flow direction, component breakdowns, and installation guidelines.
	EK-Quantum Surface X-Flow Radiator Setup Configurations Guide A user guide detailing the setup configurations for the EK-Quantum Surface X-Flow Radiator, including crossflow options and component details.