EK-Quantum Surface Radiator Setup Configurations

RADIATOR USER GUIDE

[EK Logo]

Important Information & Guidelines

Please note the installation of the product is intended to be undertaken by an adequately trained and experienced person. You are installing the product at your own risk. If you are not properly trained or experienced or feel unsure about the installation procedure, please refrain from installing the product yourself and contact EKWB tech support for assistance. EKWB disclaims liability for any damages to the product as well as incidental, consequential, or indirect damages incurred due to improper or inappropriate installation.

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the installation process.
EK Fittings require only a small amount of force to screw them firmly in place since the liquid seal is ensured with the rubber O-ring gaskets.
The use of quality market-proven corrosion-inhibiting coolants is always strongly recommended for any liquid cooling system.
Do not use pure distilled water as a cooling liquid! For best results, EKWB recommends the use of EK-CryoFuel Coolants.

EK-Quantum Surface Radiators

EK-Quantum Surface Radiators have a classical U-shape coolant flow, with inlet and outlet both on one side of the radiator. However, you can still choose which port of the radiator will serve as an inlet, and which for the outlet in your custom loop.

Setup 1: First Flow Direction

Picture on the left shows the first flow direction setup of the EK-Quantum Surface P360M Radiator, which is a Multiport radiator. On a non-multiport radiator, you can choose only one inlet and one outlet port.

[Diagram: EK-Quantum Surface P360M with OUTLET OPTIONS and INLET OPTIONS indicated]

Setup 2: Second Flow Direction

Picture on the left shows the second flow direction setup of the EK-Quantum Surface P360M Radiator, which is a Multiport Radiator. On a non-multiport radiator, you can choose only one inlet and one outlet port.

[Diagram: EK-Quantum Surface P360M with INLET OPTIONS and OUTLET OPTIONS indicated]

⚠️ EK recommends using the same number of inlets and outlets for the most optimal performance!

⚠️ It is mandatory to use the extenders on any inlet and outlet position!

⚠️ If transferred from the stock position of the radiator to another, check if the extenders are tightened to avoid leakage!

ℹ️ The same port setup applies for all EK-Quantum Surface radiator variants!

Fill/Drain Port (Multiport Radiators)

[Diagram: Radiator with FILL/DRAIN PORT indicated]

On the Multiport Radiator, opposing to the inlet/outlet side of the radiator, there is an extra port for filling or draining the loop.

⚠️ It should not be used as an inlet or an outlet port!

Exploded View of Removable Components

The following sections detail the removable components for the EK-Quantum Surface S, P, and X series radiators.

EK-Quantum Surface S Series

[Diagram: Exploded view of EK-Quantum Surface S Series components]

2x QUANTUM SURFACE END TANK SHROUD (ALUMINIUM)
2x QUANTUM SURFACE SIDE PLATE (STAINLESS STEEL)
2x QUANTUM SURFACE EXTENDER
8x TORX SCREW M3 x 6 mm
QUANTUM SURFACE TANK

For reference on picture above: EK-Quantum Surface S240

EK-Quantum Surface P Series

[Diagram: Exploded view of EK-Quantum Surface P Series components]

2x QUANTUM SURFACE END TANK SHROUD (ALUMINIUM)
2x QUANTUM SURFACE SIDE PLATE (STAINLESS STEEL)
2x QUANTUM SURFACE EXTENDER
8x TORX SCREW M3 x 6 mm
3x QUANTUM SURFACE PLUG (MULTIPORT VERSION)
QUANTUM SURFACE TANK

For reference on picture above: EK-Quantum Surface P360M

EK-Quantum Surface X Series

[Diagram: Exploded view of EK-Quantum Surface X Series components]

2x QUANTUM SURFACE END TANK SHROUD (ALUMINIUM)
2x QUANTUM SURFACE SIDE PLATE (STAINLESS STEEL)
2x QUANTUM SURFACE EXTENDER
8x TORX SCREW M3 x 6 mm
3x QUANTUM SURFACE PLUG (MULTIPORT VERSION)
QUANTUM SURFACE TANK

For reference on picture above: EK-Quantum Surface X420M

Support and Service

In case you need assistance, please contact:

https://www.ekwb.com/customer-support/

EKWB d.o.o.
Pod lipami 18
1218 Komenda
Slovenia - EU

Social Media

Facebook: EKWaterBlocks
Twitter: @EKWaterBlocks
Instagram: ekwaterblocks
YouTube: EKWBofficial
Pinterest: ekwaterblocks

	EK-Quantum Surface Radiator Setup Configurations - User Guide Detailed user guide for EK-Quantum Surface Radiators, covering setup configurations, exploded views of components for S, P, and X series, and support information. Learn how to install and configure your EK-Quantum Surface radiator for optimal performance in your custom liquid cooling loop.
	EK-Quantum Surface Radiator Setup Configurations - User Guide This user guide provides detailed setup configurations, flow direction options, and component breakdowns for EKWB's EK-Quantum Surface Radiators, including S, P, and X series. It covers installation guidelines, port usage, and support information.
	EK-Quantum Surface Radiator Setup Configurations - User Guide \| EKWB Detailed user guide for EK-Quantum Surface Radiators (S, P, X series). Covers setup configurations, installation tips, component breakdowns, and support information from EKWB.
	EK-Quantum Surface Radiator Setup Configurations User Guide Comprehensive user guide for EK-Quantum Surface Radiators, detailing setup configurations, exploded views of S, P, and X series components, and support information.
	EK-Quantum Surface Radiator Setup Configurations: User Guide Comprehensive user guide for EK-Quantum Surface Radiators, detailing setup configurations, component overviews, installation guidelines, and support information for S, P, and X series radiators.
	EK-Quantum Surface Radiator Setup Configurations User Guide This guide provides setup configurations for EK-Quantum Surface Radiators, including S, P, and X series. It details coolant flow, port usage, and exploded views of components.
	EK-Quantum Surface X-Flow Radiator Setup Configurations Guide A user guide detailing the setup configurations for the EK-Quantum Surface X-Flow Radiator, including crossflow options and component details.
	EK-Quantum Surface Radiator Setup Configurations Guide A guide to the setup configurations for EK-Quantum Surface Radiators, including S, P, and X series. Details on installation, components, and best practices for liquid cooling systems.