URSHULT LED Spotlight
by IKEA
Important Safety Instructions
For indoor use only.
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
Important Information: Keep these instructions for future use.
- The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.
- The light source contained in this luminaire shall only be replaced by the manufacturer, its service agent, or a similarly qualified person.
- ONLY USE A SAFETY TRANSFORMER WITH A SELV (Safety Extra Low Voltage) OUTPUT AS A SUPPLY FOR THE PRODUCT.
Assembly Instructions
This section provides step-by-step guidance for assembling the URSHULT LED spotlight.
What's Included:
- 1 x URSHULT light fixture
- 4 x Mounting brackets/sleeves
- 4 x Medium screws
- 4 x Smaller screws
- 2 x Small screws
Step 1: Mount the Bracket
Attach the mounting bracket to a suitable surface (e.g., a shelf or cabinet) using four screws. Ensure the bracket is positioned correctly, with a 50mm (2 inches) clearance indicated for the cable management. The main light fixture's power/control unit attaches to this bracket.
Step 2: Connect Components
Connect the LED driver and power supply cord (sold separately) to the main light fixture's unit.
Step 3: Secure the Unit
Slide the connected unit onto the mounted bracket until it clicks into place.
Connecting Multiple Units:
The URSHULT system allows for connecting up to a maximum of 4 units together. Ensure all connections are secure and follow safety guidelines.
Important Note on Power Supply:
The LED driver and power supply cord are sold separately. Always use a safety transformer with a SELV output for powering the product.
Product Information
The URSHULT is an LED lighting fixture designed for indoor use. It is often used in conjunction with other IKEA systems like UTRUSTA and OMLOPP for integrated cabinet lighting solutions.
