WinBridge B002 Voice Amplifier User Manual
Model: B002
Function Illustration
1. Power Button: Long press to power on/off. Double click to turn Bluetooth on/off. In music mode, short press to pause/play music.
2. Mute Button: Short press to mute/unmute music.
3. Volume Up: Short press to increase music volume.
4. Volume Down: Short press to decrease music volume.
5. DC Charging Jack: Port for charging the unit.
6. Mic Jack: Port for connecting the microphone.
7. Reset Button: Press with a toothpick to reset the device if it freezes.
8. USB Port: For playing audio files from a USB drive.
9. Microphone Power: Long press the power button on the microphone to turn it on/off.
10. Battery Indicators: Show the battery level of the unit.
How to Amplify Voice
Operation is straightforward. Turn on the speaker and headset microphone. They will pair automatically. Once paired, you can amplify your voice.
How to Connect Bluetooth
Long press the power button to turn on the unit. Double-click the power button to enable Bluetooth; the speaker will emit a "beep" prompt. On your Bluetooth device (e.g., phone), search for the Bluetooth device named "B002". Click to pair. A successful pairing will be indicated by another "beep" prompt from the speaker.
Music Control: Long press the volume up button to switch to the next track. Long press the volume down button to switch to the previous track.
USB Mode
Insert a USB drive to automatically play audio files. Long press the volume up button to switch to the next track. Long press the volume down button to switch to the previous track.
Application
Since Bluetooth technology can be susceptible to signal interference from other electronic devices, it is recommended for indoor use.
How to Reset
If the device freezes or becomes unresponsive, use a thin object like a toothpick to press the reset button to restore its functionality.
How to Wear Voice Amplifier Unit
Attach the waistband to the metal hooks on both sides of the voice amplifier unit. Adjust the belt to wear it around your waist or hang it on your shoulder. Alternatively, use the back clip to attach the voice amplifier to your waistband or trousers.
How to Disassemble and Assemble Headset Microphone
The wireless earhook is removable. Rotate it counter-clockwise to remove it and clockwise to install it.
Package Includes:
- 1*Voice Amplifier Unit
- 1*Headset Microphone
- 1*Charging Cable
- 1*Waistband
- 1*Manual
After-sale Service
WinBridge provides a one-year warranty and lifetime technical support.
Toll Free Hotline: +1 (833) 996-2881
Email: info@wwinbridge.com
Website: www.winbridgestore.com
If you encounter any difficulties or require clarification, please do not hesitate to contact us via email.
Technical Parameters
| Parameter | Specification |
|---|---|
| Output Power | 15W |
| Battery Capacity | 2600mAh |
| Mic Working Time | 8-10 hours |
| Mic Battery | 400mAh |
| Charging Current | 110-240 AC |
| Working Time | 12-15 hours |
| Charging Time | 5 hours |
| Mic Charging Time | 2-2.5 hours |
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
How to Charge Voice Amplifier/Headset Microphone
Connect the Type-C end of the charging cable to the DC jack on the voice amplifier/headset microphone and the USB end to a 5V charger. An adapter is not included.
Speaker Charging Status: The battery indicator lights flash while charging and remain constantly lit when fully charged.
Microphone Charging Status: The battery indicator lights flash while charging and remain constantly lit when fully charged.
Please Noted:
- Please use a DC 5V plug to charge the voice amplifier and microphone.
- Plug the adapter into a 110-240 AC outlet and connect the charging cable to the DC 5V power input on the speaker/mic.
- To extend the life of the internal battery, charge the unit regularly, even if not in use.
- Do not overcharge the battery by leaving the system plugged in continuously, as this can reduce battery life and cause overheating.
