WinBridge WB007 Voice Amplifier User Manual
Function Illustration
Main Unit
- MIC jack: For connecting the microphone.
- DC charging jack: For charging the main unit.
- Reset Button: Press with a toothpick to reset if the device freezes.
- Volume Up (+): Short press to increase volume.
- Volume Down (-): Short press to decrease volume.
- Mute Button: Short press to mute or unmute audio.
- Power/Bluetooth Button: Long press to power on/off. Double-click to enable Bluetooth. In music mode, short press to pause or play music.
Earhook Microphone
- Power Button: Press and hold to turn the microphone on or off.
- Volume Up (+): Short press to increase microphone volume.
- Volume Down (-): Short press to decrease microphone volume.
- Charging Port: For charging the microphone.
Getting Started
How to Amplify Voice
Operation is straightforward. Turn on the speaker and the earhook microphone; they will pair automatically. You can then amplify your voice.
How to Connect Bluetooth
Long press the power button to turn on the device. Double-click the power button to enable Bluetooth; the speaker will emit a 'beep' sound. On your Bluetooth device (e.g., phone), search for the Bluetooth name 'WB007' and click to pair. The speaker will emit another 'beep' sound upon successful pairing. Long press the '+' button to switch to the next track, and long press the '-' button to switch to the previous track.
How to Reset
If the device freezes or becomes unresponsive, use a thin object like a toothpick to press the reset button to restore its default settings.
Charging and Usage
How to Charge
Connect the Type-C end of the charging cable to the DC jack on the voice amplifier or earhook microphone. Connect the USB end to a 5V charger. Please note that a power adapter is not included.
How to Wear the Voice Amplifier Unit
Take out the voice amplifier unit. Fasten the waist belt to the metal hooks on both sides of the unit. Tie it around your waist or hang it on your shoulder; the belt is adjustable. Alternatively, use the back clip to attach the voice amplifier to your waistband or trousers.
Charging Status Indicators
Speaker Charging Status: The battery indicator lights flash while charging and remain constantly lit when fully charged.
Microphone Charging Status: The battery indicator is red while charging and turns off when fully charged.
Important Notes
- Please use a DC 5V plug to charge the voice amplifier and microphone.
- Plug the adapter into a 110-240V AC outlet and connect the charging cable to the DC 5V power input on the speaker or microphone.
- To extend the life of the internal battery, please charge the unit regularly, even if it is not being used.
- DO NOT overcharge the battery by leaving the system plugged in continuously. This can reduce the life of the internal rechargeable battery and cause overheating.
Technical Specifications and Package Contents
Technical Parameters
| Parameter | Value |
|---|---|
| Output Power | 15W |
| Speaker Battery Capacity | 2600mAh |
| Speaker Working Time | 12-15 hours |
| Speaker Charging Time | 5 hours |
| Mic Working Time | 8+ hours |
| Mic Battery | 210mAh |
| Mic Charging Time | 1 hour |
Package Includes
- 1 * Voice Amplifier Unit
- 1 * Earhook Microphone
- 1 * Charging Cable
- 1 * Waistband
- 1 * Manual
After-Sale Service and Compliance
After-Sale Service
WinBridge provides a one-year warranty and lifetime technical support. Toll Free Hotline: +1 (833) 996-2881. Email: info@wwinbridge.com. Website: http://www.winbridgestore.com. If you encounter any difficulties or require clarification or support, please do not hesitate to contact us via email.
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
