WinBridge Voice Amplifier User Manual

Package Includes:

• 1* Voice Amplifier
• 1* Wireless Headset Mic
• 1* Charging Cable
• 1* Waistband
• 1* Manual

After-sale Service

[customer support] WinBridge provides one year warranty and lifetime technical support.

Toll Free Hotline: +1 (833) 996-2881

Email: info@winbridgestore.com

Website: http://www.winbridgestore.com

Please be confident that seller support is just an email away. In case you find any difficulty, kindly do not hesitate to write back to us if you need any clarification or any kind of support.

Function Illustration

The device has indicator lights and ports:

• Indicator lights
• Power button [power]
• Volume up [plus]
• Volume down [minus]
• Mode switch [bluetooth]
• Microphone Jack
• Charging Jack [Type-C]

Key Functions:

• Power Button [power]: Press and hold to turn on or off. In music mode, short press to pause or resume playback.
• Volume Up [plus]: Short press to increase the volume. In music mode, press and hold to switch to the next track.
• Volume Down [minus]: Short press to decrease the volume. In music mode, press and hold to switch to the previous track.
• Mode Switch [bluetooth]: Short press to switch to Bluetooth mode.

Headset Microphone

(The wireless microphone is detachable)

Two ways of use: As a normal headset microphone, or remove the bracket to become a handheld microphone.

Instructions:

• Push down [down arrow] to detach the microphone bracket.
• Push up [up arrow] to attach the microphone bracket.
• [plus] Short press to increase the volume.
• [minus] Short press to decrease the volume.
• When the microphone is turned on, the LED lights up.

Manually Pairing Headset and Speaker

1. Turn on the speaker, short press the M key to switch to UHF mode. The device will prompt "UHF mode".
2. Press and hold the M button on the device for about 3 seconds again until you hear the voice prompt: "UHF is waiting for pairing".
3. Turn on the microphone, then press and hold the M button on the microphone until the speaker voice prompts: "UHF paired."
4. Pairing is successful, and the microphone can output sound.

How to Wear Voice Amplifier Unit

Take out the voice amplifier unit. Fasten the strap to metal hooks on both sides. Tie it on the waist or hang it on your shoulder; the strap is adjustable. You can also use the back splint to clinch the voice amplifier on the waistband or trousers.

[Diagram showing different ways to wear the unit: shoulder strap, waist strap, clipped to waistband]

How to Charge the Speaker/Headset Mic

1. Connect the charging cable: Insert the Type-C end of the cable into the Type-C port [Type-C] on the speaker or headset mic.
2. Plug into a power source: Connect the USB end to a 5V DC adapter (such as a phone charger or computer USB port).
3. Charging starts: The device will begin charging automatically.

Speaker Charging Status:

The battery indicator lights flash while charging, and the indicator lights stay constantly lit when fully charged.

Microphone Charging Status:

The red light stays on during charging and turns off when fully charged.

How to Connect Bluetooth

1. Long press to power on. Then, short press the M button to switch to Bluetooth mode. The speaker emits a "beep" prompt.
2. Open your Bluetooth device (e.g., a phone) and search for Bluetooth named "WB008". Click to pair.
3. When the pairing is successful, the speaker will emit another "beep" prompt.
4. In music mode, short press to switch to the previous track, and short press to switch to the next track.

FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Please Noted:

1. Please use a DC 5V-2A plug to charge the speaker or mic.
2. Plug adapter into a 110-240 AC outlet, and connect the charging cable end into the DC 5V-2A power input on the speaker or mic.
3. In order to extend the life of the internal battery, please charge the unit regularly even if the system is not being used.
4. Please DO NOT overcharge the battery by leaving the system plugged in continuously. This will reduce the life of the internal rechargeable battery and may cause overheating.

Technical Parameters: