WinBridge M801 Voice Amplifier User Manual

Package Included

• 1* Voice Amplifier
• 1* Wireless Headset Microphone
• 1* Charging Cable
• 1* Charging Plug
• 1* Audio Cable
• 1* Adjustable Waistband
• 1* User Manual

After-sale Service

WinBridge provides a one-year warranty and lifetime technical support. For any questions, please contact info@wwinbridge.com or call the Toll Free Hotline: +1 (833) 996-2881.

Function Illustration

1. Power Switch/Play/Pause/Mute: Press and hold for 3 seconds to turn on/off. Short press to play/pause music or mute/amplify voice.
2. Previous/Volume -: Short press for previous song, long press for volume down.
3. Next/Volume +: Short press for next song, long press for volume up.
4. Mode Switch: Press to switch modes.
5. Recording: Press to start/stop recording.
6. LED Display Screen: Shows status and information.
7. TF Card Slot: For TF card playback.
8. USB Slot: For USB drive playback.
9. DC 5V Charging Port: For charging the device.
10. Mic-in Jack: Supports 3.5mm wired microphone.
11. AUX Input: For audio input via AUX cable.
12. SOS Button: Activates the SOS function.
13. Power Indicator: Shows power status.
14. Power On/Off Button: Main power button.

Detailed Introductions

1. How to connect headset mic with speaker

Turn on the speaker and headset mic. They will connect automatically. If the 'MIC' indicator flashes, double-click the power button on the headset mic until the 'MIC' indicator stays lit. Keep the wireless headset microphone within 49ft of the speaker for a stable signal.

Warm Tips:

• Voice amplification levels: 0-20.
• If not in use for 30 minutes, the speaker and mic enter sleep mode. Turn them on again to resume.

2. Bluetooth

Short press the 'M' button to switch to Bluetooth mode ('bLUE' indicator flashes). On your device, go to Settings > Bluetooth, search for 'M801', and connect. The 'bLUE' indicator will stop blinking upon successful connection.

Warm Tips: Keep the speaker and your device within 32ft for a stable Bluetooth connection.

3. How to play TWS?

Turn on two M801 speakers. Press the 'M' button on both to enter Bluetooth mode. Long press the 'M' button on the first speaker. The second speaker's Bluetooth indicator will show 'SLAU', indicating a successful TWS connection. Pair your phone or Bluetooth device with 'M801'. To stop TWS, long press the 'M' button on the first speaker.

4. How to play audio files by U disk/TF card?

Insert a U disk or TF card into the respective slot. The speaker will automatically enter USB/TF mode and play audio files. The display will show 'USB' or 'TF'.

Warm tips:

• Ensure the U disk/TF Card contains audio files.
• Short press '+'/'--' to switch tracks; long press to adjust volume.
• Long press 'M' to cycle through repeat modes (single 'ONE', all 'ALL').
• U disk/TF Card not included.

5. How to play recording?

Insert a USB Flash Drive/TF Card and pair the wireless headset microphone. Short press the 'Power' button to start recording ('REC' flashes). Short press again to stop and save. Long press the 'Power' button to play recordings. You can record while playing music via Bluetooth if the headset mic is paired first.

Noted:

• Short press '+'/'-' to switch tracks; long press to adjust volume.
• Supports simultaneous Bluetooth and MIC recording.

6. How to play audio files by Aux cable?

Plug a 3.5mm audio cable into the Aux jack. The speaker will enter Aux mode and play audio from your device. The screen shows 'AUX'.

Audio Format Supported: MP3, WAV, WMA, APE, FLAC.

How to charge the speaker?

Charge the speaker when the battery icon blinks. The icon stops blinking when fully charged, and 'F' shows on the screen. For optimal battery life, charge for 3 hours, even if the display shows '10'. Do not overcharge. When not in use for a long time, keep the battery above 60%.

How to charge the wireless headset microphone

The headset mic has 4 battery indicators, each representing 25%. Charge when one indicator is left. All 4 indicators will be lit when fully charged.

Technical Parameters

• Power output: 20W
• Frequency response: 20Hz-20KHz
• Charging port: Type-C
• Battery capacity: 2500mAh
• Headset Mic battery capacity: 500mAh
• Microphone working time: 5-7 hours
• Speaker working time: 12-15 hours
• Speaker charging time: 3 hours
• Headset Mic charging time: 1 hour

Trouble Shooting

1. No sound from speaker and microphone:

• Ensure the speaker is not on MUTE ('MUTE' not shown on screen).
• Check if the speaker and mic volumes are turned on.
• Confirm the mic is paired successfully with the speaker.

2. The voice amplifier has distinct howling:

• Do not point the microphone towards the speaker.
• Wear the microphone correctly, 1-2 cm from the mouth.
• In small rooms, reduce the volume to avoid howling.

How to use the SOS function?

Open the side cover and long press the 'SOS' button to make a sound. Use the volume keys to adjust the volume. Short press 'SOS' or 'M' to stop.

How to wear voice speaker:

Fasten the waist belt to the metal hooks on the amplifier and wear it on your waist or shoulder. Adjust the belt as needed. Wear the wireless headset microphone, positioning it 1-2 cm from your mouth, and turn down the volume first to avoid howling.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.