WinBridge WB008 Voice Amplifier User Manual
Package Includes:
- 1 x WinBridge WB008 Voice Amplifier
- 1 x Headset Microphone
- 1 x Charging Cable
- 1 x Waistband
- 1 x Manual
After-Sale Service
WinBridge provides a one-year warranty and lifetime technical support. For assistance, please contact the Toll Free Hotline at +1 (833) 996-2881 or email info@wwinbridge.com. Visit http://www.winbridgestore.com for more information.
Function Illustration
The WinBridge WB008 features several controls:
- Power/Play/Pause: Press and hold to turn the device on or off. In music mode, a short press pauses or resumes playback.
- Volume Down/Previous Track: Short press to decrease the volume. In music mode, press and hold to switch to the previous track.
- Volume Up/Next Track: Short press to increase the volume. In music mode, press and hold to switch to the next track.
- Mode Switch: Short press to switch to Bluetooth mode.
The device also has a Microphone Jack and a Charging Jack.
Device Overview: The unit is compact and can be worn on the waist or shoulder using the adjustable strap, or clipped onto a waistband or trousers using the back splint.
Technical Parameters:
| Parameter | Specification |
|---|---|
| Output Power | 15W |
| Battery Capacity | 1800 mAh |
| Charging Input | DC 5V - 2A (from 110-240V AC outlet) |
| Working Time | 4-5 hours |
| Dimensions | 3.35 x 0.79 x 4.13 inches |
| Weight | 6.07 oz |
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
How to Amplify Voice
To amplify your voice, turn on the speaker, plug the headset microphone into the MIC jack, and then you can output sound.
How to Connect Bluetooth
- Long press the power button (1) to turn on the device.
- Short press the Mode button (M) to switch to Bluetooth mode. The speaker will emit a "beep" prompt.
- On your Bluetooth device (e.g., phone), search for the Bluetooth device named "WB008".
- Click to pair. Upon successful pairing, the speaker will emit another "beep" prompt.
- In music mode, use the short press buttons (2) and (3) to switch to the previous or next track, respectively.
How to Wear Voice Amplifier Unit
Attach the provided strap to the metal hooks on both sides of the amplifier unit. Wear the unit on your waist or shoulder; the strap is adjustable. Alternatively, use the back splint to clip the amplifier onto your waistband or trousers.
Speaker Charging Status:
The battery indicator lights flash while charging and remain constantly lit when the unit is fully charged.
Important Notes for Charging:
- Please use a DC 5V - 2A plug for charging.
- Connect the charging cable to the DC 5V - 2A power input on the speaker and plug the adapter into a 110-240V AC outlet.
- To extend the life of the internal battery, charge the unit regularly, even if it is not in use.
- DO NOT overcharge the battery by leaving the system plugged in continuously, as this can reduce battery life and cause overheating.
