FRÖSJÖN
Assembly Instructions
Brand: IKEA
Important Safety Information
⚠ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product. [TV symbol with cross]
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
(This warning is provided in multiple languages in the original document.)
Parts List
Ensure all parts are present before assembly.
| Part | Description | Quantity |
|---|---|---|
| 1 | Main Frame Structure | 1 |
| 2 | Upper Shelf Supports | 2 |
| 3 | Lower Shelf Supports | 2 |
| 4 | Shelves | 4 |
| 5 | Adjustable Feet | 4 |
| 6 | Screws (Type A) | 16 |
| 7 | Screws (Type B) | 6 |
| 8 | Wall Mounting Brackets | 4 |
| 9 | Wall Anchors | 4 |
Assembly Steps
Step 1: Assemble Base Frame
Attach the 4 adjustable feet to the base of the main frame structure using 4 of Screw Type A.
[Diagram shows the main frame structure with four feet being attached using screws.]
Step 2: Attach Upper Supports
Connect the 2 upper curved supports to the main frame using 5 of Screw Type A.
[Diagram shows attaching two curved supports to the upper part of the frame using screws.]
Step 3: Attach Lower Supports
Connect the 2 lower straight supports to the main frame using 3 of Screw Type A.
[Diagram shows attaching two straight supports to the lower part of the frame using screws.]
Step 4: Connect Frame Sections
Join the frame sections together using the remaining 8 of Screw Type A.
[Diagram shows the frame coming together, secured with multiple screws.]
Step 5: Install Shelves
Place the 4 shelves onto the frame supports.
[Diagram shows shelves being placed onto the frame supports.]
Step 6: Secure Shelves
Fasten each shelf to the frame using 2 of Screw Type B per shelf (total 6).
[Diagram shows screws being inserted to secure shelves to the frame.]
Step 7: Position and Mark for Wall Mounting
Place the assembled unit against the wall in its desired location. Mark the wall through the mounting holes on the unit.
[Diagram shows the unit near a wall, with brackets and screws being prepared for attachment.]
Step 8: Level Unit
Adjust the feet to ensure the unit is stable and level on the floor.
[Diagram shows adjustable feet being rotated to level the unit.]
Step 9: Secure to Wall
Install wall anchors (if needed for your wall type) at the marked positions. Attach the unit to the wall using the wall mounting brackets and screws. The diagram indicates two points of attachment.
[Diagram shows the final attachment of the unit to the wall.]
