Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Note: This monitor is ENERGY STAR certified. This product qualifies for ENERGY STAR in the factory default setting which can be restored by “Factory Reset” function in the OSD menu. Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR specified limits.
[ENERGY STAR logo] [EAC logo]
Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
WEEE Symbol Statement
This symbol [crossed-out bin symbol] on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Safety Information
- Before setting up this Portable USB Monitor, carefully read all the documentation that came with the package.
- To prevent fire or shock hazard, never expose this Portable USB Monitor to rain or moisture.
- Never try to open this Portable USB Monitor cabinet.
- Before using this Portable USB Monitor, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
- Avoid dust, humidity, and temperature extremes. Do not place this Portable USB Monitor in any area where it may become wet. Place this Portable USB Monitor on a stable surface.
- Never push objects or spill liquid of any kind into the slots on this Portable USB Monitor cabinet.
- If you encounter technical problems with this Portable USB Monitor, contact a qualified service technician or your retailer.
- This Portable USB Monitor is powered by USB port which complies with LPS and SELV circuit according to IEC60950-1:2005.
WARNING
Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures.
Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum).
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.
Stability Hazard.
The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions.
A product may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- ALWAYS use cabinets or stands or installation methods recommended by the manufacturer of the product set.
- ALWAYS use furniture that can safely support the product.
- ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
- ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.
- NEVER place a product in an unstable location.
- NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.
- NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed.
If the existing product is going to be retained and relocated, the same considerations as above should be applied.
ASUS Contact Information
| ASUSTeK Computer Inc. | ASUS Computer International (America) | ASUS Computer GmbH (Germany and Austria) |
|---|---|---|
| Address: 1F, No.15, Lide Rd., Beitou Dist., Taipei City, 112 | Address: 48720 Kato Rd, Fremont, CA 94538, USA | Address: Harkortstr. 21-23 D-40880 Ratingen, Germany |
| Telephone: +886-2-2894-3447 | Telephone: +1-510-739-3777 | Telephone: +49-1805-010920 |
| Fax: +886-2-2894-7798 | Fax: +1-510-608-4555 | Website: http://www.asus.de/ |
| E-mail: info@asus.com.tw | Website: http://usa.asus.com/ | Online Contact: http://www.asus.de/sales |
| Website: http://www.asus.com.tw/ | ||
| Technical Support | Technical Support | Technical Support |
| Telephone: +86-21-38429911 | Telephone: +1-812-282-2787 (English Only) +1-905-370-2787 (French Only) |
Telephone: +49-1805-010923 |
| Online Support: http://support.asus.com/ | Online Support: http://support.asus.com/ | Support Fax: +49-2102-959911 Online Support: http://support.asus.com/ |
Care & Cleaning
- Cleaning: Turn your monitor off and unplug the cable. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
- Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
- Please use [clean water] only as the cleaning method.
The following symptoms are normal with the monitor:
- You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
- When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
- When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
-
ASUS websites
The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com
-
Optional documentation
Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
-
Protect your eyes with ASUS EYE CARE Monitors
The latest ASUS monitors feature exclusive Blue Light and Flicker free technologies to keep your eyes healthy in today's digital world. Refer to https://www.asus.com/Microsite/display/eye_care_technology/
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.
Product information from EU energy label [QR code image description - exclude QR code itself]
Chapter 1: Product Introduction
1.1 Welcome!
Thank you for purchasing the ASUS® Portable USB Monitor! The latest ASUS Portable USB Monitor provides great portability and simplicity to your daily life, enhancing both of your viewing experience and style.
1.2 Package Contents
Check your package for the following items:
- Portable USB Monitor
- Quick Start Guide
- Warranty Card
- USB Type-C Cable
- Mini HDMI to HDMI Cable
- Protective Sleeve
- 360° kickstand
- Adapter (optional)
If any of the above items is damaged or missing, contact your retailer immediately. [Icon: Phone/Contact]
1.3 Monitor Introduction
1.3.1 Front View
The front of the monitor features the display panel and control buttons. The monitor is depicted from the side showing ports and from the front showing the display and buttons. A diagram illustrates turning the monitor on by pressing the power button.
1. Power button/Power LED:
- Press this button to turn the monitor on/off.
- The color definition of the power indicator is as the below table:
Status Description Blue ON Amber Standby mode Dark OFF
2. 5-way key:
- Turns on the button functions menu. Enacts the selected OSD menu item.
- Increases/Decreases values or moves your selection up/down/left/right.
Ports on the monitor:
- 3. USB Type-C port
- 4. USB Type-C port
- 5. Mini-HDMI port: Connect your device with HDMI port.
- 6. Earphone jack Port: Used to connect Earphone jack.
2.1 Monitor Standing Positions
The monitor can be positioned upright using its integrated stand. The stand allows for adjustment to an optimal viewing angle, typically around 70 degrees, for comfortable use.
[Diagram: Monitor being adjusted on its stand to a 70-degree angle]
An app is available for enhanced functionality: ASUS DisplayWidget Center.
2.2 360° Kickstand with Drawstring Pockets
The monitor features a 360° kickstand that allows for versatile positioning. The kickstand can be deployed to support the monitor in various orientations.
[Diagram: Illustrating the deployment and use of the 360° kickstand]
[Diagram: Showing correct (checkmark) and incorrect (X) ways to use the kickstand]
2.3 Connect the USB Monitor with System
Ensure your host system supports USB Type-C "DisplayPort™ Alt Mode". Use the appropriate USB Type-C cable for connection.
Connection Methods:
- A: USB Type-C Connection: Connect the monitor to a USB Type-C port on your system that supports power delivery (≥10W).
- B-1: USB Type-C and HDMI Connection: Connect the monitor using both a USB Type-C cable (for power/data) and a Mini HDMI to HDMI cable.
- B-2: HDMI and USB Type-C Connection (Optional Power): Connect the monitor using a Mini HDMI to HDMI cable and an optional USB Type-C cable for power.
Please make sure the host system connected supports USB Type C "DisplayPort™ Alt Mode" & the USB Type C cable is correctly connected between the USB monitor and the host system.
Chapter 2: Setup
3.1 OSD (On-Screen Display) Menu
3.1.1 How to Reconfigure
The OSD menu allows you to adjust various monitor settings. To navigate and reconfigure settings:
- Press the MENU button to activate the OSD menu.
- Press the ▲ and ▼ buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
- To select the highlighted item on the menu, press the Central key (often the 5-way key's center press).
- Press the ▼ and ▲ buttons to select the desired parameter.
- Press the Central key to enter the slide bar and then use the ◀ or ▶ buttons, according to the indicators on the menu, to make your changes.
[Screenshot: ASUS MB169CK OSD menu showing Splendid, Eye Care, Image, Color, Input Select options, with a QR code for ASUS DisplayWidget Center.]
3.1.2 OSD Function Introduction
This section details the functions available within the OSD menu.
-
Splendid
This function contains eight sub-functions that you can select for your preference:
- Standard Mode: Best for document editing with SPLENDID™ Video Intelligence Technology.
- sRGB Mode: Best for viewing photos and graphics from PCs.
- Scenery Mode: Best for scenery photo displaying with SPLENDID™ Video Intelligence Technology.
- Theater Mode: Best for movie watching with SPLENDID™ Video Intelligence Technology.
- Game Mode: Best for game playing with SPLENDID™ Video Intelligence Technology.
- Reading Mode: Best for book reading.
- Darkroom Mode: Best for a weak ambient light environment.
- User Mode: Allows for more adjustable color settings.
Note: In sRGB mode, Saturation, Color Temp., and Contrast functions are not user-configurable.
[Icon: Feather/Quill for note]
-
Eye Care
Adjust the energy level of Eye Care from LED backlight.
- Blue Light: Adjusts blue light in five steps. OFF: no changes; Level 4: higher level means less blue light scattered. When activated, default Standard Mode settings are imported. Brightness is user-configurable at levels other than maximum. Compliance with TUV low blue light standards.
- Color Augmentation: Adjusts color enhancement from 0 to 100.
This function is not available in sRGB mode under Splendid.
To alleviate eye strains:
- Take breaks away from the display during long working hours. Short breaks (at least 5 mins) after every hour are more effective than one long break.
- Rest eyes periodically by focusing on distant objects to minimize strain and dryness.
- Perform eye exercises: (1) Look up and down, (2) Roll eyes slowly, (3) Move eyes diagonally.
- High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue Light reduction (up to 70%) helps avoid CVS (Computer Vision Syndrome).
[Icon: Eye with a line through it or similar for eye care]
-
Image
Adjust image Brightness, Contrast, Sharpness, and Trace Free.
- Brightness: Adjusting range from 0 to 100.
- Contrast: Adjusting range from 0 to 100.
- Sharpness: Adjusts picture sharpness, range from 0 to 100.
- Trace Free: Speeds up response time via Over Drive technology, range from 0 (lower) to 100 (faster).
-
Color
Select image color preferences.
- Saturation: Adjusting range from 0 to 100.
- Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode. In User Mode, R, G, and B colors are user-configurable from 0 to 100.
-
Input Select
Select the input source: Auto Input Detection, HDMI, USB-C-1, USB-C-2.
-
MyFavorite
Allows setting three MyFavorite keys. Users can select from options like "Splendid", "Brightness", "Contrast", "Auto Rotation", "Volume", "Mute", "Input Select", "Blue Light", "Color Temp." to assign to these keys. Default settings vary per key.
[Icon: Star for MyFavorite]
-
Settings
Adjusts system configuration.
- Auto Rotation: Enables/disables automatic image rotation. This function only works under Windows OS with DisplayWidget Center software installed.
- Sound: Adjust Volume and Mute.
- QuickFit: Contains two patterns: (1) Grid and (2) Photo size.
- Grid pattern: Facilitates organizing content and layout on one page for a consistent look and feel. Alignment grid 1 will rotate automatically if auto rotation is enabled. [Diagram: Illustrating alignment grids 1 and 2]
- Photo size: Provides accurate real-size viewing and editing of photos on screen. [Diagram: Showing common photo sizes like 4x6 and 3x5]
- Power Setting: Adjusts "Performance Mode" and "Power Saving Mode".
- OSD Setup: Adjusts OSD Timeout, DDC/CI, and Transparency.
- Language: Select OSD language. Available languages include: English, French, German, Spanish, Italian, Dutch, Russian, Polish, Czech, Croatian, Hungarian, Romanian, Portuguese, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian, Ukrainian, and Vietnamese.
- Power Indicator: Turns the power LED indicator on/off.
- Power Key Lock: Disables/enables the power key.
- Key Lock: Disables all key functions. Pressing the key for more than five seconds disables key lock.
- Information: Displays monitor information.
- All Reset: Selects "Yes" to revert all settings to factory default mode.
Chapter 3: General Instruction
3.2 DisplayWidget Center
Download the latest DisplayWidget Center from the MB169CK official website under the "Support" tab, then "Driver & Utility".
Always connect your MB169CK to your input device FIRST, and then launch DisplayWidget Center.
It is recommended to create a shortcut for DisplayWidget Center on your computer desktop for easier activation.
[Screenshot: ASUS DisplayWidget Center software interface showing various settings like Splendid, Image, Color, etc.]
3.3 Specifications
| Model | MB169CK |
|---|---|
| Panel Size | 15.6" (16:9, 39.62cm) wide screen |
| Resolution | 1920 x 1080 |
| Brightness (Typ.) | 250 cd/m² |
| Contrast (Typ.) | 1000:1 |
| Display Colors | 262 K |
| Digital Input | USB Type-C™ (DisplayPort™ Alt Mode) / Mini HDMI |
| Colors | Black |
| Power Consumption | 7.64 W (Based on Energy Star 8.0 Standard) |
| Operating Temp. | 0° ~ 40° |
| Phys. Dimension (WxHxD) | 36.01 x 22.56 x 1.18 cm |
| Box Dimension (WxHxD) | 43.4 x 29.0 x 7.6 cm |
| Net Weight (Esti.) | 0.78kg |
| Gross Weight (Esti.) | 1.7kg |
| Voltage Rating | 5V or 9V ===, 3.0A Or 12V ===, 2.5A Or 15V ===, 2.0A Or 20V ===, 1.5A |
*Specifications are subject to change without notice.
3.4 Troubleshooting (FAQ)
| Problem | Possible Solution |
|---|---|
| Power LED is not ON |
|
| The power LED lights amber and there is no screen image |
|
| Screen image is too light or dark |
|
| Screen image bounces or a wave pattern is present in the image |
|
| Screen image has color defects (white does not look white) |
|
| After connecting with the USB Type-C source device, the power LED lights continuously blinking or showing ASUS logo repeatly |
*1: White color background will consume higher power, so it's better to use white color background to test the power limit from source USB Type-C device. *2: If MB169CK does not re-start when adjusting to value 100, that means source USB Type-C device has sufficient power supply. |
3.5 Supported Timing List
Supported Primary Timing
| Timing | Resolution | HDMI | TYPE-C |
|---|---|---|---|
| PC Timing | 640x480-60Hz | V | V |
| 800x600-60Hz | V | V | |
| 1024x768-60Hz | V | V | |
| 1280x720-60Hz | V | V | |
| 1280x960-60Hz | V | V | |
| 1280x1024-60Hz | V | V | |
| 1600x900-60Hz | V | V | |
| 1920x1080-60Hz | V | V | |
| Video Timing | 640x480-60Hz | V | V |
| 720x480-60Hz | V | V | |
| 720x576-50Hz | V | V | |
| 1280x720-50Hz | V | V | |
| 1280x720-60Hz | V | V | |
| 1920x1080-50Hz | V | V | |
| 1920x1080-60Hz | V | V |
16:9 Timing
| Timing | Resolution | HDMI | TYPE-C |
|---|---|---|---|
| Detail Timing | 1920x1080-60Hz | V | V |
* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.
Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
ASUS Global
ASUS Deutschland
