Blaupunkt Orlando 750
6.9" Touch screen Display MP5 Receiver Instruction Manual
Compatible with Android Auto & Apple CarPlay™
IMPORTANT NOTICE & PRECAUTIONS
Thank you for using this multi-media player. Please read the operation manual carefully before use and keep it for future reference.
The unit is designed for DC 12V negative ground operation systems only. Ensure your vehicle has a DC 12V negative ground electrical system. Connect speaker (-) leads to the speaker (-) terminal. Never connect left and right channel speaker wires together or to the vehicle body.
Normal operating temperature is between -20°C and +60°C. Avoid operation in extreme temperatures or blocking unit vents/radiator panels, as this can cause heat buildup, damage, or fire.
Supported media files: RMVB / MPEG 4 / AVI / 1080p / MP3 / WMA / JPEG.
INSTALLATION
Diagram Description: An illustration shows the main unit, a mounting bracket, and existing parts supplied with the car. It depicts how the bracket attaches to the unit and then to the car's dashboard.
Notes:
- Installation varies by car type and supplied parts.
- Store small articles in places inaccessible to children.
- Install only with the supplied screws.
- Installation by a professional technician is strongly recommended.
Remarks:
Mounting brackets and screws are parts supplied with your car, not provided with this unit.
WIRING CONNECTION
Back of Unit (BAGIAN BELAKANG UNIT):
Diagram Description: A diagram shows the rear panel connectors, including POWER, ISO-C, ANT, MIC, and various audio/video output/input jacks (RR, RL, SW1, FR, FL, SW2, F-CAM, R-CAM, V-OUT).
Remarks: Due to laws in some countries, video playback during driving may be prohibited. To enable video playback while driving, the brown wire (brake) should be connected to the car battery's ground (b-).
Wiring Table:
| Connecting Socket | Portion | Colour | Connection |
|---|---|---|---|
| Power | Yellow | Memory back up (B+) | |
| Orange | Headlamp detection / backlight illumination | ||
| Blue | Auto antenna | ||
| Black | Ground (GND) | ||
| Red | Ignition switch | ||
| Purple / Black | Rear right speaker (-) | ||
| Purple | Rear right speaker (+) | ||
| Grey / Black | Front right speaker (-) | ||
| Grey | Front right speaker (+) | ||
| White / Black | Front left speaker (-) | ||
| White | Front left speaker (+) | ||
| Green / Black | Rear left speaker (-) | ||
| Green | Rear left speaker (+) | ||
| Pink | Front sight | ||
| Pink / Black | Brake Detect | ||
| Brown | Back sight | ||
| Grey | Steering wheel control (1) | ||
| Green | Steering wheel control (2) | ||
| Black | Steering wheel control (Ground) | ||
| ANT | Radio antenna | ||
| MIC | Extraposition MIC jack | ||
| Audio output jack | SW1 | Green | Sub-Woofer Output |
| SW2 | Green | Sub-Woofer Output | |
| RR | Red | Rear Left Speaker Output | |
| RL | White | Rear Right Speaker Output | |
| FL | White | Front Left Speaker Output | |
| FR | Red | Front Right Speaker Input | |
| Video output jack | V-OUT | Yellow | Video Output |
| Video input jack | R-CAM | Yellow | Back Sight Camera Input |
| F-CAM | Brown | Front Camera Input |
MAIN UNIT OPERATION
Symbol / Function & Operations & Controls
- [Power Symbol]: Power turn on or off & adjust sound output level.
- [Mode Shift Symbol]: Press to shift screen between MAIN MENU & current operation mode.
- Radio Mode: Press repeatedly to fine tune the radio frequency upward or downward. Press & hold shortly to tune the radio frequency to the upward or downward station for broadcasting.
- USB / SD Input Mode / Bluetooth Mode: Press repeatedly to shift track upward or downward for playback. Each time press & hold shortly to activate various fast forward/rewind speeds for playback. (Note: Fast forward or fast rewind is not available at Bluetooth mode & picture playback mode)
- Bluetooth Mode: During unit operation, press to shift to Bluetooth mode for operation. Press to pick up an incoming call; dial out after input a phone number; redial last dial out number.
- AUX: Insert an external device to this jack to have sound output of that external device through the unit.
- RST: Press with a pointed object (such as a ball point) to reset the unit to its initial setting by the factory (default stage).
- IR: Remote control sensor for signal reception from remote handset.
- MICRO SD / SD Symbol: Insert micro SD card to this port for digital files playback.
- USB: Insert USB device to this slot for digital files playback.
- MIC: For voice reception under Bluetooth operation.
- TFT SCREEN: Shows the status of operation on the unit. This screen is also a touch display - soft touch the screen for different operations of the unit (refer to other parts of this manual for operation details).
Note: Printings and symbols on the above may be varied from the exact main unit. Referred to the main unit for exact functions and features that applied. User is highly recommended to use the touch screen control to operate.
REMOTE HANDSET – GENERAL OPERATION
BATTERY REPLACEMENT
Refer to the back of the remote handset for details on how to replace the battery. Replace only with the same or equivalent type of battery.
BATTERY DISPOSAL
Attention should be drawn to the environmental aspects of used battery disposal. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly placed.
Remove this tab before using the remote handset.
OPERATION & CONTROL MODES
| NO. | SYMBOL | OPERATION & CONTROL MODES |
|---|---|---|
| 1. | [Power Symbol] | When the unit is turn off, press to turn on the unit. When the unit is turn on, press & hold shortly to turn off the unit. During unit operation, press to turn on or off of sound mute control. |
| 2. | SOURCE | Press repeatedly to select the desired mode for operation. |
| 3. | SYS / CLR | At Bluetooth mode, press to erase the digit input by error. |
| 4. | EQ / LOUD | Press repeatedly to select the desired preset equalization mode. Press & hold shortly to turn on or off of loudness control. |
| 5. | AUDIO | At video and music playback mode, each time press & hold shortly to select different audio output channels. (Note: Available on input device or media files recorded with different output channels and this selection is not available under Bluetooth mode) |
| 6. | OSD | At media playback mode, press & hold shortly to display the contents of the playback details on screen. Note: Not available at music playback mode |
| 7. | 1-6 / 0-9 | Radio Mode: Press any one of the number key 1-6 to select a station that had been stored in the preset memory number key 1-6 for broadcasting. Press & hold shortly the number key 1-6 to store the current broadcasting frequency or station into the respective preset memory key number 1-6. USB / SD Input Mode: Press directly to input the number of track for playback. Bluetooth Mode: Press directly to input the phone number for dial out. |
| 8. | ZOOM ? | USB / SD Input Mode: At video & photo playback, each time press & hold shortly to select various zoom in and zoom out of screen for viewing. Radio Mode: Press to start scanning all the preset stations on memory and stop for a few seconds for broadcasting. Press & hold shortly to start searching the frequency and storing the strongest signal stations into the preset memory stations. After storing the stations, the unit starts scanning all the preset stations on memory and stop for a few seconds for broadcasting. |
| 9. | BND [band] | Radio Mode: Press repeatedly to select the desired radio band for broadcasting. USB / SD Input Mode: Press to stop playback temporary and will shift to playlist (for playback selection). Normal playback will resume after a while. Bluetooth Mode: Press to hang up or refuse an incoming call. |
| 10. | RDM [random] | At USB / SD input playback mode, press & hold shortly to turn on or off of random playback of the input device. |
| 11. | INT [intro] | At music playback mode, press & hold shortly to turn on or off of intro playback of the input device. (Note: Not available at Bluetooth mode) |
| 12. | ▶️ / ⏸️ | At USB / SD input & Bluetooth mode, press to pause, resume or start playback. |
| 13. | Folder / Playlist Mode: ▲ / ▼ / ◀️ / ▶️ | During folder/playlist display at media playback mode, press repeatedly to select track for playback. Once selected, press ENT to confirm. Photo Playback Mode: Press to rotate photo position or show up-down, left-right mirror image. |
| 14. | ENT [enter] | During folder/playlist display at media playback mode, press ▲ / ▼ / ◀️ / ▶️ to select the desired setting/setup and press ENT to confirm/enter. |
| 15. | ◀️ / ▶️ | Radio Mode: Press repeatedly to fine tune radio frequency upward or downward. Press & hold shortly to tune radio frequency to the upward or downward station for broadcasting. USB / SD Input Mode (Playback Mode): Press repeatedly to shift track upward or downward for playback. Press & hold shortly to activate fast forward or fast rewind mode. At this mode, press repeatedly to select various speeds of fast forward or fast rewind. (Note: Not available for operate at photo playback mode) Bluetooth Mode: Press to shift track upward or downward for playback. |
| 16. | REP [repeat] | At playback mode under USB / SD input, each time press & hold shortly to activate various repeat playback setting. |
| 17. | ANGLE [angle] | Not available for operation. |
| 18. | TITLE | Radio Mode: Press to select stereo (ST) or mono mode at FM radio band. (Note: At stereo mode and when stereo signal received, stereo indicator appeared on screen whereas this is no indication for mono mode and mono signal received). |
| 19. | SUB-T [subtitle] | Video Playback Mode: Each time press & hold shortly to select different sub-titles that recoded in the input device or media files. (Note: Depended on the input device & playback media, this function may not be available) |
| 20. | SLOW [slow] | Radio Mode: At FM radio band, press to select local setting for reception of strong signal stations and distant setting for reception of weak signal stations. (Note: LOC appears on screen on local setting whereas no indication for distant setting) Video Playback Mode: At video playback mode, each time press & hold shortly to select different speeds on slow motion playback. Bluetooth Mode: Press for "⭐" symbol input. |
| 21. | VOL + / VOL - | Press repeatedly or press & hold to adjust sound output level. |
| 22. | # / MENU / PBC | Bluetooth Mode: Press for "#" symbol input. |
| 23. | SETUP ⚙️ | During unit operation, press & hold shortly to activate setup menu on screen for various system setup. Press & hold shortly again to return to previous operation mode. (Note: System setup cannot be operated by remote handset. System setup can only be operated by touch screen – refer to ON SCREEN OPERATION for details) |
| 24. | ? / PHONE | Bluetooth Mode: Press to pick up an incoming call; dial out after input a phone number; redial last dial out number. Bluetooth Conversation Mode: Press to shift conversation between main unit and mobile phone. |
Remarks: Depends on the input devices & playback media files, operation may be varied or not available for operation.
ON SCREEN – MAIN MENU OPERATION
At MAIN MENU, touch the following icons to start operations:
- Radio Icon ?: Touch to start radio operation (when the radio antenna connected).
- Phone Icon ?: Touch to start BT operation (when the mobile phone connected).
- Apps Icon: Touch Apps to enter the main interface.
- USB Icon ?: Touch to start USB input operation (when an USB device inserted).
- Setup Icon ⚙️: Touch to activate SYSTEM SETUP MENU on screen to have various setup of the unit.
- BT Music Icon ?: Touch BT Music to start playback of Bluetooth music (when the mobile phone connected).
- Auxiliary Input Icon: Touch to start auxiliary input operation (when an auxiliary device inserted).
- Phone Mirror Link Icon ?: Touch to start mobile phone mirror linking operation (when the mobile phone connected by USB cable).
- Front Camera Icon: Touch to start front camera viewing (when connected to front camera and pink/black wire).
ON SCREEN – RADIO OPERATION
At MAIN MENU, touch the Radio Icon ? to shift to radio mode.
Diagram Description: The radio interface shows frequency, band (FM1, FM2, FM3, AM1, AM3), station presets, and control buttons.
- Touch to shift to MAIN MENU for selection of various operation and setup.
- Touch to shift to previous mode ↩️.
- Touch ◀️ / ▶️ to turn frequency upward or downward and stop for broadcasting when a station received. Touch & hold repeatedly to fine tune radio frequency upward or downward.
- This shows the preset memory stations. Touch any one of the preset memory station to have broadcasting of relative station. Touch & hold shortly on any one of the preset memory station, the current broadcasting station/frequency will be stored in the respective preset memory station.
Preset Stations Example:
1 87.50 2 90.00 3 98.00 4 106.00 5 108.00 6 87.50 - Touch ? to start searching the radio frequency & storing the strongest signal stations into memory.
- Touch to browse the radio station.
- Touch to activate EQ operation ?️.
- Touch to select FM1/FM2/FM3.
ON SCREEN – BLUETOOTH OPERATION
At MAIN MENU, touch the Phone Icon ? to shift to Bluetooth mode.
LINK UP WITH MOBILE PHONE
To link up Bluetooth connection with the mobile phone, take your phone and follow the steps:
- Set the mobile phone to Bluetooth state.
- Start to search for new devices.
- After searching, the new device "ORLANDO 750" (or similar) should be found. Confirm the search.
- If needed, input the default code "0000" or "8888" on the mobile phone.
- Simultaneously, the Bluetooth icon & BT DEVICES MENU will appear on the screen.
- Connection succeeded, and you can start using the Bluetooth function.
Diagram Description: Screenshots show the "BT Setup" screen with fields for Name and Pin Code, and the "BT Music" screen displaying song information.
- Touch Dial Icon to dial out numbers of the phone.
- Touch Contacts Icon ? to show the phonebook of the connected mobile phone.
- Touch Record Icon ? to show the record on incoming calls / dial out numbers / missing calls of the connected mobile phone.
- Touch BT Music Icon ? for transmission of music playback from the connected mobile phone.
ON SCREEN – MOBILE PHONE LINKING OPERATION
At MAIN MENU, touch the PhoneLink Icon ? to shift to mirror link mode.
For iOS devices (supported iPhone 5 to iPhone 13), mobile phone linking operation will start automatically without any setting. Mirror linking will appear on screen.
For Android devices, when the phone is connected for the first time, the following screen appears:
Diagram Description: The screen shows icons for iPhone, CarPlay, Mirror, Android, and Mirror again, with "Auto Connect" options. An Android device icon with "Mirror" text is highlighted. A QR code is also displayed.
Click the Mirror icon for Android, and then scan the QR code using the connected Android phone. Mirror linking will appear on screen, and mobile phone operation can be started and controlled by touching the unit's screen.
Important notice on mobile phone linking operation:
- Support mirror link: iOS phones from iPhone 5 to iPhone 13 and Android phones from version 5.0 upwards are supported.
- A USB cable should be used to connect the phone to the front USB slot of the head unit.
- Operation & setting may vary depending on the connected smartphone.
ON SCREEN – USB / SD CARD INPUT OPERATION
At MAIN MENU, touch the USB Icon ? to shift to multi-media playback mode, and playback will start automatically. Depending on the input device and playback media, touch on screen (at music playback, touch repeatedly on screen) to show various playback menus for operation.
Diagram Description: A video playback interface is shown with playback controls (Previous, Play/Pause, Next, Repeat All, Random Play, List) and a progress bar.
ON SCREEN – AUXILIARY INPUT OPERATION
At MAIN MENU, touch the AV-IN Icon to shift to auxiliary input operation (provided an auxiliary video device had been connected). At auxiliary input operation, touch any portion of screen to activate AV INPUT MENU for operation.
Diagram Description: The screen displays "Tidak ada sinyal" (No signal).
ON SCREEN – FRONT CAMERA INPUT OPERATION
At MAIN MENU, touch the F-CAM Icon to shift to front camera viewing (provided front camera and the pink/black wires are connected). At front camera viewing mode, touch any portion of screen to activate FRONT CAMERA INPUT MENU for operation.
Diagram Description: An image shows a view from a front camera, with parking assist lines (red and yellow).
ON SCREEN – SETUP OPERATION
At MAIN MENU, touch the Setup Icon ⚙️ to shift screen for various setup selection of the unit.
Diagram Description: Two screenshots show the Setup menu with categories like Basic Setup, Equipment, EQ Setup, Display settings, etc., and sub-options within them.
Example Setup Options:
- Basic Setup: Reversing sound attenuation, Beep, Factory Set.
- Equipment: Tuner Region, Driving Ban Video, Front camera, Steering Wheel Position, Color lamp mode, Color lamp interval.
- EQ Setup: Default Media Volume, Default call volume, Touch Calibration, Restore Factory, Language, Clock, Version.
SPECIFICATION
GENERAL
- Power Requirement: DC 12 Volts, negative ground
- Load Impedance: 4 Ohms
- Maximum Power Output: 60 Watts x 4 (RMS)
AM RADIO SECTION
- Frequency Range: 530 - 1710 KHz
FM RADIO SECTION
- Frequency Range: 87.5 - 107.9 MHz
SIMPLE TROUBLE SHOOTING
PROBLEMS, CAUSES & SOLUTIONS
- No power
Causes: Check connecting wires. Check if fuse is blown. Replace with proper value fuse if necessary. - No sound
Causes: Check speaker wire connections. - No picture
Causes: Check if video wire is connected to the video device. - Unit hang-up / No function when pressing buttons or TFT screen
Solution: Press the RESET button to reset the unit to its default stage. - Poor effect or unable to receive radio
Causes: Check if the radio antenna is inserted or properly connected. Antenna may not be the proper length. Ensure the antenna is fully extended. Antenna may be poorly grounded. Check and ensure the antenna is properly grounded. - Stereo cannot be received under radio mode
Causes: Tune the radio frequency accurately. The broadcasting signal is too weak, set the mode to MONO. - Remote handset does not work
Causes: Replace with a new battery. Point the remote handset directly at the remote sensor of the main unit. Clean the surface of the remote sensor. - Bluetooth not operated
Causes: Check if the devices are linked up correctly.
