Blaupunkt Dakota BP800PLAY Car Multimedia System

Introduction

This document provides comprehensive instructions for the Blaupunkt Dakota BP800PLAY car multimedia system. It covers installation, operation, features such as radio, media playback, Bluetooth connectivity, Apple CarPlay, Android Auto, sound settings, basic configurations, and important safety information.

For detailed information and support, please visit www.blaupunkt.com.

Safety, Cleaning, and Disposal Notes

Safety Notes

The car sound system is manufactured to high safety standards. However, dangers may arise if these instructions are not followed. Always read and understand these instructions before use. Keep them accessible for all users.

Symbols Used:

• ⚠️ DANGER! Warns about injuries.
• ⚠️ DANGER! Warns about high volume.
• CE: Indicates compliance with EU directives.
• [Step]: Identifies a sequencing step.
• [List]: Identifies a listing.

Road Safety

Operate the device in a way that allows safe control of the vehicle. Stop if necessary to use features that could distract from driving. Follow navigation recommendations only if they do not violate traffic regulations. Always prioritize traffic signs and regulations. Listen at moderate volumes to protect hearing and be aware of acoustic warning signals.

General Safety Notes

Do not modify or open the device. Use only as directed, in a vehicle with a 12V system and installed in a DIN slot. Repairs and installation should be performed by a specialist.

Declaration of Conformity

Blaupunkt Technology GmbH declares compliance with EU directive 1999/5/EC. Full declaration available at www.blaupunkt.com.

Cleaning Notes

Use only a dry or slightly moistened cloth for cleaning. Avoid solvents, dashboard sprays, and plastic care products that may damage the surface.

Disposal Notes

Do not dispose of the old unit in household trash. Use available return and collection systems for old devices and batteries.

Device Operation

Placing the Device in Operation

Switching On/Off:

• Press the [Power/?️] button for switch-on.
• Hold the [Power/?️] button for more than 2 seconds for switch-off.
• If connected to vehicle ignition, it can also switch on/off with the ignition.

Volume

Adjust volume from 0 (off) to 39 (maximum) using the [?] button and dragging on the volume bar.

Muting the Device

Briefly press the [Power/?️] button to mute or reactivate the previous volume.

Main Menu

Access the main menu by pressing the [?/⬅️] button or by touching the top-left corner of the screen. The last active audio source plays back unless a new one is selected.

Setting the Reception Area

Navigate to Main Menu ➡️ [⚙️] ➡️ [General] ➡️ [Radio region]. Select the desired reception area (e.g., "USA1 (FM/AM)").

Radio Mode

Starting Radio Mode

From the main menu, press the [?] button.

Memory Bands

Switch between memory bands (e.g., FM, AM) using the [?️] button. Up to 18 FM and 12 AM stations can be stored per bank.

Tuning into Stations

Manual Tuning: Use the [⏭️/⏮️] buttons for approx. 2 seconds to increment frequency. Direct frequency input is also possible via a numeric keypad.

Seek Tuning: Briefly press the [⏭️/⏮️] buttons to tune to the next receivable station.

Storing Stations

Manual Store: Tune to a station, then touch and hold a preset channel (P1-P6) for approx. 2 seconds.

Automatic Store (Travelstore): Searches and stores the 6 strongest FM stations in the current memory bank. Previously stored stations are deleted.

Preset Stations

Tune to a preset station by touching its channel on the screen.

Seek Tuning Sensitivity

Adjust sensitivity using specific buttons. 'LOC' [?] on finds only strong signals; 'LOC' [?] off finds strong and weak signals.

RDS (Radio Data System)

Access RDS options by pressing the [?ℹ️] button.

USB/microSDHC Media Playback

This system supports audio (MP3/WMA), video, and image playback from USB drives or microSDHC cards.

Audio Playback

Select the source via the main menu. Use the [?/?] button to navigate. Press the [?] button to display all audio files. Tap on a folder/track to open or start playback.

Playback Controls:

• [▶️/⏸️]: Interrupt and continue playback.
• [⏭️/⏮️]: Select next/previous track.
• [⏭️/⏮️] (long press): Fast searching.
• [?]: Cycle through repeat modes (current track, current folder, all tracks).
• [?]: Start/end random track play.
• [?️]: Access equalizer settings.
• [⋮]: Show more controls.

Video Playback

Similar to audio playback. Select source, navigate folder/file list, and press play. Controls include [Next Movie], [Previous Movie], [▶️/⏸️], [?/?], [⋮].

Image Playback

Select source, navigate folder/file list, and press to view images. Controls include [Next Image], [Previous Image], [▶️/⏸️], [?/?], [⋮].

Connectivity

Bluetooth Mode

Allows registering cell phones and media devices for hands-free calling and audio streaming (A2DP/AVRCP).

Starting Bluetooth: From the main menu, press [??].

Registering Devices: Ensure Bluetooth is active on both devices. Search for new devices on your phone; "Blaupunkt" will appear. Establish connection and enter pairing code if prompted.

Telephone Mode: Access [?] (Dialpad), [?] (Phonebook), [??] (Call List), [⚙️] (Options), or [?❌] (Disconnect). Answer/reject calls using [?✅]/[?❌] buttons.

Alphabetic Search: In the Phonebook, use the keypad to search contacts.

Bluetooth Settings: Access via [⚙️] button. Options include [?➡️] (Auto Connect), [?➡️] (Auto Answer), and [??] (Synchronous Phone-Book). A Bluetooth icon ? indicates an active connection.

Audio Playback via Bluetooth Streaming

Play music from a connected Bluetooth device. From the main menu, press [??]. Controls similar to USB audio playback.

Apple CarPlay

A safer way to use your iPhone in the car. Connect your iPhone via Apple Digital Cable. Access navigation, calls, messages, and music. Exit CarPlay mode via the [?] button. Activate Siri voice control using the [?️] button.

Android Auto

Brings useful Android apps to your car display. Requires Android 5.0 (Lollipop) or higher (recommend 6.0 Marshmallow+), a data plan, and the Android Auto app. Connect via USB cable.

Settings and Features

External Audio/Video Sources

Features two external AV inputs (cinch socket at rear) for audio and video playback. Use caution with the connector to avoid injury. Start AV-IN mode via [AV IN Front]/[AV IN Back] buttons.

Sound Settings

Volume Distribution (Fader/Balance): Adjust sound balance between front/rear and left/right speakers using the [?↔️] button.

Equalizer: Access via the [?️] button. Select presets or customize frequency bands. The [Loudness] option can boost bass at low volumes.

Steering Wheel Control (SWC)

Configure steering wheel buttons for device control. Navigate to [⚙️] ➡️ [?️] and match buttons to functions. Press [?] to clear programming.

Basic Settings

Access via [⚙️] menu.

• General: Set OSD language, key color, radio reception region, confirmation beep, SWC menu, and LOC [?] function (local seeking).
• Video: Adjust Day/Night Mode and display brightness. Video playback may be restricted while driving if "Parking" is activated.
• Volume: Adjust volume ratios for all audio sources.

Useful Information

Warranty

A manufacturer's warranty is provided for products purchased within the European Union. For purchases outside the EU, warranty terms are issued by the respective domestic agency.

Connection Diagram

The device connects via:

• Power Line: For main power supply.
• Speaker Line: For connecting speakers (Front L/R, Rear L/R, Sub.1/Sub.2).
• MIC: For microphone input.
• Radio Antenna: For radio reception.
• USB (Rear): For connecting USB storage devices.
• LINE OUT & AV IN: Includes audio outputs (Front L/R, Rear L/R, Sub.1/Sub.2) and AV inputs (AUX IN L/R, AUX IN CVBS).
• SWC & CAMERA LINE: For Steering Wheel Control (SWC) and Camera input. Specific wires include: Yellow (CAMERA IN, VIDEO OUT), Pink (PARKING), Green/White (REVERSE), Blue (P.ANT/CNT), Black (SWC, MIC).