LYCKAN Chair
Brand: IKEA
Document Number: AA-2445011-2
Product Overview
This document provides assembly instructions for the IKEA LYCKAN chair. Please follow these steps carefully to ensure correct assembly.
Tools required: Screwdriver ? (not included).
Important: Read through all instructions before starting assembly. Ensure you have all parts listed.
Parts List
| Part | Description | Quantity | Part Number |
|---|---|---|---|
| Screw | Hex head screw | 2 | 130718 |
| Screw | Hex head screw | 10 | 121991 |
| Screw | Phillips head screw | 6 | 100358 |
| Allen Key | Hexagonal L-shaped tool | 1 | 100001 |
Assembly Steps
Step 1
Prepare the seat base. Place the seat base on a flat, protected surface. Ensure the correct orientation as shown in the diagram. Avoid placing it on hard or abrasive surfaces to prevent scratches.
Note: [Correct placement indicated by arrows pointing downwards onto the surface. Incorrect placement is shown with a cross symbol ❌.]
Step 2
Attach the main frame supports to the seat base. Insert two (2) Screws (Part 130718) into the designated holes on the frame supports and loosely thread them into the seat base. Use the Allen Key (Part 100001) for this step. Do not fully tighten yet.
Parts used: 2x Screw (130718), 1x Allen Key (100001).
Action: Loosely attach frame supports to seat base.
Step 3
Secure the frame further by attaching the side supports. Insert four (4) Screws (Part 121991) into the designated holes on the side supports and thread them into the seat base. Use the Allen Key (Part 100001). Do not fully tighten yet.
Parts used: 4x Screw (121991), 1x Allen Key (100001).
Action: Attach side supports to seat base.
Step 4
Attach the backrest support frame to the main frame. Insert two (2) Allen Keys (Part 100001) into the designated holes on the main frame. This step appears to use the Allen key itself as a connecting element, or the diagram is illustrative of the tool's use in securing a component.
Parts used: 2x Allen Key (100001) [interpreted as components or tool usage].
Action: Attach backrest support frame.
Step 5
Attach the seat cushion support bars. Insert six (6) Screws (Part 100358) through the seat cushion support bars and into the corresponding holes on the frame. Use a screwdriver ? to tighten these screws. Do not fully tighten yet.
Parts used: 6x Screw (100358), 1x Screwdriver ?.
Action: Attach seat cushion support bars.
Step 6
Attach the backrest frame to the seat. Insert four (4) Screws (Part 121991) through the backrest frame and into the corresponding holes on the seat structure. Use the Allen Key (Part 100001) to tighten these screws. Do not fully tighten yet.
Parts used: 4x Screw (121991), 1x Allen Key (100001).
Action: Attach backrest frame to seat.
Step 7
Final tightening and seat attachment. Insert two (2) Screws (Part 121991) to secure the seat cushion or final components. Then, go back and fully tighten all previously installed screws using the appropriate tools. Ensure the chair is stable and all connections are secure.
Parts used: 2x Screw (121991), Allen Key (100001), Screwdriver ?.
Action: Finalize seat attachment and fully tighten all screws.
Note: Ensure all screws are tightened securely for stability. [Diagram shows final tightening of screws.]
