BUSLÄTT Chair Assembly Instructions
IKEA Design and Quality
General Assembly Information
Before starting assembly, ensure you have all parts and tools. Follow these general guidelines:
- Use a screwdriver ? for assembly.
- Do not use a power drill ❌ as it may damage the product.
- Verify all parts are present before proceeding ❓.
- If you need assistance, contact IKEA for support ?.
Parts List
| Quantity | Description | Part Number |
|---|---|---|
| 4x | Screw | 130718 |
| 4x | Screw | 10126011 |
| 4x | Screw | 106917 |
| 1x | Allen Key | 100092 |
Model Number: AA-2548069-2
Assembly Steps
Step 1: Attach Backrest
Insert the backrest into the designated slots on the seat frame. Ensure it is properly aligned.
Step 2: Attach Side Supports
Using four screws (Part No. 106917) and the Allen key (Part No. 100092), attach the side supports to the backrest. Ensure screws are inserted correctly, not at an angle ❌.
Step 3: Attach Front Support
Attach the front support bar to the seat frame. This provides structural stability.
Step 4: Secure Seat to Frame
Place the seat onto the frame. Use four screws (Part No. 130718) and the Allen key (Part No. 100092) to secure the seat to the frame. Ensure screws are tightened properly, not cross-threaded ❌.
Step 5: Further Secure Seat
Use four screws (Part No. 10126011) and the Allen key (Part No. 100092) to further secure the seat to the frame. Ensure proper alignment and tightening.
Step 6: Final Backrest Attachment
Attach the backrest to the seat frame using four screws (Part No. 106917) and the Allen key (Part No. 100092). Ensure correct screw insertion ❌.
Step 7: Final Tightening
Perform a final tightening of all screws using the Allen key (Part No. 100092). Ensure all connections are secure and the chair is stable ✔️.
Important Information
ⓘ Stability Check: Ensure the chair is stable before use. Do not push or lean on the chair if it feels wobbly or unstable ❌.
The assembled chair should be sturdy and ready for use.
