How to Install the Smart Life App
To install the Smart Life app on your iOS or Android mobile phone, scan the provided QR code. Open a browser or another app with a "Scan QR Code" function and scan the QR code to download the app. The app name is: Smart Life.
System Requirements:
- iOS system requires iOS 8.0 or higher.
- Android system requires Android 4.3 or higher.
Important Note: Bluetooth and Wi-Fi must be turned on when connecting to the app. Otherwise, the connection will fail.
Add Configuration
Turn on Bluetooth and Wi-Fi before entering the app.
Device Reset and Connection Steps:
Reset the device first:
- If the light is blinking rapidly, skip the reset step.
- Power on the device.
- Turn the device on-off-on-off-on (refer to the user manual for specific instructions).
- Ensure the light is blinking rapidly.
Note: Please complete the network distribution within 3 minutes after resetting the device.
Select light status or hear a beep
Select 2.4 GHz Wi-Fi Network and enter password.
If your Wi-Fi is 5GHz, please set it to be 2.4GHz. This is a common router setting method.
Enter your Wi-Fi Network name and Wi-Fi Password.
Wait for automatic connection
The app will show the progress of adding the device.
FCC Statement and Compliance:
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
