Smart LED Strip Light User Manual

What's in Package

• Controller
• 3M Adhesive Tape
• 24 Key Remote
• Adapter
• User Manual
• Strip Light

Installation Diagram

A diagram showing the connection of the LED strip light, controller, and power adapter.

Add Device

Step 1: Download Smart Life APP

Search for "Smart Life" by name or scan the QR code to download the App on your smartphone.

Step 2: Register Account

Register with your mobile number or email. A verification code will be sent to you.

Step 3: Add Device

1. Power on the strip light and open the Smart Life App.
2. Ensure GPS, WiFi, and Bluetooth are enabled.
3. Tap the '+' icon in the top right corner to start adding a device.
4. The app will automatically search for nearby devices. Wait for a few seconds.
5. Once the device is found, select your 2.4G Wi-Fi network and input the password to register the device to the cloud service.

Step 4: Resetting the Device

You may need to reset the device in the following situations:

• When you cannot connect the device to your App.
• When someone else wants to add the product to their phone.
• When you change your Wi-Fi status (e.g., change Wi-Fi name or password, or replace your router).

Step 5: How to Reset the Strip Light

• Method 1: Press the power button for at least 5 seconds until the strip light starts blinking in red. This resets the device to pairing mode. Then, add the device to the App again.
• Method 2: Quickly press the Wi-Fi button on the remote three times in less than 1.5 seconds until the strip light starts blinking in red. This resets the device to pairing mode. Then, add the device to the App again.

Controller Box / Remote Control

The controller box has buttons for On/Off/Reset, Brightness Cycling, Music Dancing, Modes Cycling, and Strobe Flash.

APP Control / Voice Control

The app allows control over Color, Modes Cycling, Speed Cycling, Brightness Cycling, Music Dancing, and different color options.

Link Smart Life Account to Echo (Amazon Alexa)

1. Open the Alexa App and tap the menu in the upper left corner.
2. Go to 'Skills'.
3. Search for the 'Smart Life' skill in the search bar.
4. Select the 'Smart Life' skill.
5. Tap 'Enable'. Account linking is required.
6. Enter your Smart Life account information and tap 'Link Now' to link your account to your Amazon account.
7. Your Amazon Echo is now connected to your Smart Life system.
8. Discover Devices: You can discover devices on the Alexa App by going to 'Home' → 'Smart Home' → 'Discover Devices', or by saying 'Alexa, discover devices'.

Control Devices by Voice Commands with Alexa:

• 'Alexa, turn on/off strip light.'
• 'Alexa, set strip light to 50 percent.'
• 'Alexa, brighten/increase strip light.'
• 'Alexa, dim/decrease strip light.'

Link Smart Life Account to Google Home

Ensure your Google Home is set up correctly.

1. In the Google Home App, tap '+' on the home page, then tap 'Set up device'. Select 'Works with Google'.
2. Find 'Smart Life' in the list. Select your region, enter your Smart Life account and password, then tap 'Link Now'.
3. After assigning rooms for your devices, they will appear on the Home Control page.

Control Your Smart Devices through Google Home:

Example commands for a bedroom light:

• 'OK Google, turn on/off bedroom light.'
• 'OK Google, set bedroom light to 50 percent.'
• 'OK Google, brighten bedroom light.'
• 'OK Google, dim bedroom light.'
• 'OK Google, set bedroom light to red.'

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Statement

To maintain compliance with FCC's RF Exposure Guidelines, this equipment should be installed and operated with a minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.