Smart Strip Light

Installation

Please read the manual thoroughly before using the product.

Preparation

• Cleaning the installation surface.
• Sticking the strip light to the installation surface.
• Plugging the adapter into the socket.

Smart Control

This product supports button control, smart control platforms, and APP control. It is compatible with smart voice assistants like Amazon Echo and Google Home.

App Control (Smart Life App)

Follow these steps to connect the LED Strip Lights to your Wi-Fi network using the Smart Life app:

Quick Mode Configuration (Recommended)

1. Ensure quick mode configuration is initiated: the LED Strip Lights blink red rapidly. If not, press and hold the button on the Wi-Fi controller for 6 seconds until the LED strip lights blink red rapidly.
2. Tap the '+' icon on the top right corner of the "Smart Life" app and select your device type (Lighting devices) to enter "Add Device".
3. Follow the in-app instructions to connect the LED Strip Lights to your Wi-Fi network. If the LED Strip Lights blink rapidly but do not connect, try pressing the button twice per second to switch colors until connected successfully.
4. Once connected, the app will prompt the connection; click "Done".
5. The LED Strip Lights can now be controlled through the Smart Life App.
6. The "Device List" will be updated with your Smart Strip Lights upon successful configuration.

AP Mode Configuration

1. Ensure AP mode configuration is initiated: the LED Strip Lights blink red rapidly. If not, press and hold the button on the Wi-Fi controller for 6 seconds until the LED strip lights blink red rapidly.
2. Tap the '+' icon on the top right corner of the "Start your smart life" tab, then click "AP Mode" at the top right corner of the "Add Device" tab.
3. Type "Smart Life" in the search bar and click the search button next to it.
4. Enable Smart Life, sign in with your Smart Life account to complete the account linking.
5. Once connected, the app will prompt the connection; click "Done".
6. The LED Strip Lights can now be controlled through the Smart Life App.
7. The "Device List" will be updated with your Smart Strip Lights upon successful configuration.

Note: Two configuration modes are available: Quick Mode and AP Mode. Quick Mode is recommended.

Voice Control

Amazon Alexa Integration

1. Launch the Smart Life App and ensure the LED Strip Lights are in the device list.
2. Modify the device name in the app for easier recognition by Alexa (e.g., "Living room Light").
3. Minimize the Smart Life app, then launch the Alexa app and sign in. Ensure you have an Alexa voice-controlled device installed (e.g., Echo, Echo Dot).
4. In the Alexa app, navigate to the menu (usually top-left corner), click "Skills & Games", search for "Smart Life", and enable the skill.
5. Sign in to your Smart Life account to link it with Alexa.
6. Ask Alexa to discover devices. After discovery (approx. 20 seconds), Alexa will list all connected devices.
7. You can now control the LED Strip Lights using voice commands via Alexa.

Google Assistant Integration

1. Launch the Google Home App and ensure your Google Home speaker is installed.
2. In the Google Home app, navigate to the menu (usually upper-left corner) and select "Home Control".
3. On the "Add devices" page, scroll down to find "Smart Life" and click it.
4. Sign in to your Smart Life app account and password to complete the account linking.
5. Once linked, your smart devices from the Smart Life app will appear in the Google Home app. You can assign rooms to each device.
6. You can now use Google Home to control your smart devices with voice commands (e.g., "Ok Google, turn on wall light").

One-Button Control Instructions

1. When the light is powered on, press and hold the button for approximately 5 seconds until the light flashes red, then release.
2. After the red light flashes for about 15 seconds, power off and then power on again to enter different mode selecting.
3. In scene selecting mode, each press of the button cycles through the available modes (approximately 8 modes). Each mode switch interval is about 2-3 seconds.

Factory Reset

When the strip light is powered on, press and hold the switch for 5 seconds until the light flashes red, then release. The factory reset is now successful.

Note: If the strip light is connected to a new Wi-Fi network, you must restore factory settings before re-establishing the connection.

Product Information

Lifespan: About 25000 Hours

Supported Platforms: Android & iOS

Wireless Connect: Wi-Fi IEEE 802.11b/g/n 2.4GHz

Working Temperature: -20~+40°C

Working Humidity: 0%-85% RH

Power Input: 100-240V~50/60Hz 1.5A

Product Features

• Brightness Adjustment
• Color Adjustment
• One-key Operation
• Scene Mode Switch
• Timing Switch
• Voice Control
• Phone Control
• Firmware Upgrade

Safety Precautions

• Please confirm the working voltage before using this product; using inappropriate voltage may cause damage to the product and security risks.
• LED modules cannot be replaced; please do not dismantle the product yourself.
• The strip light generates heat when working; please ensure air circulation for heat dissipation.

Harmful Substances

This chart is made in accordance with the provisions of SJ/T 11364.

Legend:

• O: The content of the hazardous material in all homogeneous materials of the part is within the limit requirement of GB/T 26572.
• X: The content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement of GB/T 26572.

Warranty Instructions

• Within 7 days of receiving the product, you are free to enjoy return or replacement if it fails within the "Product Performance Fault List", after service center testing and determination.
• Within 8-15 days of receiving the product, you are free to enjoy return or maintenance if it fails within the "Product Performance Fault List", after service center testing and determination.
• Within 12 days of receiving the product, you are free to enjoy replacement or maintenance if it fails within the "Product Performance Fault List", after service center testing and determination.

Warranty Revocation Rules

• Unauthorized repairs, misuse, collision, negligence, liquid intrusion, accident, alteration, or tearing, modification, labeling, or tampering with security markings.
• Exceeding the warranty period.
• Damage caused by force majeure.
• Failures not listed in the "Product Performance Fault List".
• Failures listed in the "Product Performance Fault List" but caused by man-made factors (e.g., use of dimmers, non-rated voltage, non-standard adapters, use in unspecified environments, resulting in product performance failure).

Product Performance Fault List

Warranty Card

Customer Name:

Address:

Product Model:

Purchase Shop Name:

Shop Address:

Invoice Number:

Contact Number (Mr./Ms.):

Serial Number:

Purchased Date:

Purchased Stamp: