Assembly Instructions
Item #: N725P171392
Thank you for purchasing this quality product. Please check all packing material carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all parts and compare them with the parts list below.
Assembly Instructions
- Remove hardware from the box and sort by size.
- Please check to see that all hardware and parts are present prior to starting assembly.
- Please follow the instructions in the same sequence as numbered to ensure fast and easy assembly.
WARNING!
- Do not attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
- This product is for home use only and not intended for commercial establishments.
- Two persons are required for assembly.
- Approximate assembly time: 1.5 hours.
- Component parts and fittings are contained in the box. Please sort out all parts before you begin to assemble the item. This is to make sure you always use the correct part.
- It is STRONGLY RECOMMENDED that you ANCHOR this product. Tipping furniture can cause serious injuries and death. To prevent your furniture from tipping forward, it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided with appropriate fixings.
Parts List
| No. | Component | Qty |
|---|---|---|
| A | Sink | 1 |
| B | Side Panel-Left | 1 |
| C | Side Panel-Right | 1 |
| D | Plinth | 1 |
| E | Front Panel | 1 |
| F | Back Panel | 1 |
| G | Back Panel | 1 |
| H | Middle Panel | 1 |
| I | Shelf Panel | 1 |
| K | Front Drawer Panel | 2 |
| L | Sides Drawer Panel | 4 |
| M | Back Drawer Panel | 2 |
| N | Bottom Drawer Panel | 2 |
Hardware List
| No. | Hardware | Qty |
|---|---|---|
| 1 | Cam Lock | 26 |
| 2 | Cam Lock Screws | 26 |
| 3 | Wooden Dowels | 15 |
| 4 | Handle | 2 |
| 5 | Screws M3.5x12 | 4 |
| 6 | Screws M4x25 | 16 |
| Note: Anchor straps and appropriate fixings for wall mounting are not included. | ||
Step 1
Assemble the base structure. Connect side panels (B, C) and back panels (G, I) to the plinth (D) using cam locks (1) and cam lock screws (2).
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 2 | Cam Lock Screws | 26 |
Step 2
Attach the middle panel (H) and plinth (D) to the back panel (G) using cam locks (1) and wooden dowels (3).
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 1 | Cam Lock | 2 |
| 3 | Wooden Dowels | 2 |
Step 3
Attach the front panel (E) and back panel (F) to the main structure using cam locks (1) and wooden dowels (3).
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 1 | Cam Lock | 8 |
| 3 | Wooden Dowels | 4 |
Step 4
Attach the right side panel (C) and other internal components using cam locks (1) and wooden dowels (3).
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 1 | Cam Lock | 8 |
| 3 | Wooden Dowels | 4 |
Step 5
Install the shelf panel (I) using cam locks (1) and wooden dowels (3).
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 1 | Cam lock | 8 |
| 3 | Wooden Dowels | 5 |
Step 6: Drawer Assembly
Assemble the two drawers. Connect the front drawer panel (K), side drawer panels (L), back drawer panel (M), and bottom drawer panel (N) for each drawer. Use screws (6) for assembly.
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 6 | Screws M4x25 | 16 |
Step 7: Drawer Handle Attachment
Attach the handles (4) to the drawer fronts (K and R) using screws (5).
Hardware Used:
| No. | Hardware | Qty |
|---|---|---|
| 4 | Handle | 2 |
| 5 | Screws M3.5x12 | 4 |
Step 8: Drawer Insertion
Insert the assembled drawers into the cabinet. The diagram shows two drawers being inserted, each with side panels (L) and a front panel (K or R).
Step 9: Sink Installation
Place the sink (A) onto the top of the cabinet. Apply silicone sealant as needed (silicone sealant is not provided).
