INSTALLATION Product Manual

Version: 390033-01-24B-RY

Tools Required

Please prepare the following tools:

Screws and Hardware:

A x 66 (Ø6 x 35 mm)
B x 104 (Ø3 x 12 mm)
C x 70 (Ø15 x 12 mm)
D x 10 (Wooden Dowel)
E x 2 (Ø6 x 50mm)
F x 52 (Ø4 x 30 mm)
G x 12
H x 12
J x 12
K x 12
L x 2 (Ø5 x 68mm)
M x 12
N x 12
O x 2
R x 8 (Ø4 x 35 mm)
W x 8 (Buckle)

Panels and Components:

1 (1 PC)
2 (1 PC)
3 (1 PC)
5 (2 PCS)
6 (1 PC)
7 (2 PCS)
8 (2 PCS)
9 (4 PCS)
10 (8 PCS)
11 (4 PCS)
12 (8 PCS)
13 (4 PCS)
14 (8 PCS)
15 (12 PCS)
16 (12 PCS)
17 (1 PC)
19 (2 PCS)
21 (4 PCS)
22 (1 PC)
23 (2 PCS)

Important Safety Warning:

AWARNING Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install tipover restraint provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Assembly Instructions

Step 1: Attach screw (A) to plate 2 and attach feet 18 and 19 to plate 2 as shown.

Step 2: Install screw (A) on board 1 as shown.

Step 3: Fix slide rail (H) and (G) to panel 3 and 6 with screw (B) at first. Screw eccentric rod (A) and insert wooden dowel (D) into panel 3 and 6 as shown.

Step 4: Secure the sliding guide (G) to panel 5 with screws (B) first. Turn over to the back side and secure the sliding guide (H) to panel 5 with screws (B) again, and finally insert the dowel (D) into panel 5 as shown. Please note the holes on both sides of the plate are not consistent, just for preventing the plate from being pierced by screws.

Step 5: Fix panel 3 to panel 2 using screw (R) as shown.

Step 6: Attach panel 23 to panel 3, add cam lock (C) into panel 23 and turn clockwise to tighten as shown.

Step 7: Fix panel 5 to panel 2 using screw (R) as shown.

Step 8: Attach panel 23 to panel 5, add cam lock (C) into panel 23 and turn clockwise to tighten as shown. Screw eccentric rod (L) and insert wooden dowel (E) into panel 5.

Step 9: Attach panel 22 to panel 5, add cam lock (C) into panel 22 and then turn clockwise to tighten at first.

Step 10: Fix panel 5 to panel 2 using screw (R) as shown. Attach panel 5 to panel 22, add cam lock (C) into panel 22 and turn clockwise to tighten as shown. Screw eccentric rod (L) and insert wooden dowel (E) into panel 5.

Step 11: Attach panel 23 to panel 5, add cam lock (C) into panel 23 and turn clockwise to tighten as shown.

Step 12: Fix panel 6 to panel 2 using screw (R) as shown. Attach panel 6 to panel 23, add cam lock (C) into panel 23 and turn clockwise to tighten as shown.

Step 13: Attach panel 17 to panel 2, add cam lock (C) into panel 17 and turn clockwise to tighten as shown.

Step 14: Insert panel 7 and 8 into the grooves as shown.

Step 15: Attach panel 1 to top, add cam lock (C) into panel 3, 5, 6 and then turn clockwise to tighten at first.

Step 16: Connect No.15, 16, 21 plates with No.11 using screw (F) as shown. Slide No.13 plate into available slots as shown.

Step 17: Insert quickfit screw (A) into No.9 plate with a screwdriver as shown.

Step 18: Attach No.9 plate to the component, turn cam lock (C) in No.15, 16, 21 plates clockwise to tighten as shown. Fix knob (M) to No.9 plate with screw (N) as shown.

Step 19: Fix runner (J) and (K) to No.15 and No.16 plate respectively with screw (B) as shown.

Step 20: Connect No.15 and No.16 plate with No.12 using screw (F) as shown. Slide No.14 plate into available slots as shown.

Step 21: Insert quickfit screw (A) into No.10 plate and No.20 plate with a screwdriver as shown.

Step 22: Attach No.10 plate and No.20 plate to the component, turn cam lock (C) in No.15, 16 plates clockwise to tighten as shown. Fix knob (M) to No.10 plate and No.20 plate with screw (N) as shown.

Step 23: Fix runner (J) and (K) to No.15 and No.16 plate respectively with screw (B) as shown.

Step 24: Align rails, slide all drawers.

Step 25: Insert buckle (W) into back slots and fix with screw (B) as shown.

Step 26: Fix part (Q) to No.1 plate with screw (T) at first. Drill holes on your wall, insert part (P) and fix part (Q) with screw (S). Install anti-tipping device (O) as shown.

Warranty Information

WARRANTY CLAIMS

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
Before making a claim, contact customer support. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. Support will arrange within 48 hours. If there is out of stock, they will reply with a shipping date.
The product must be used in accordance with the instructions provided. For health reasons.
For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty.
Does not include damage during installation, but includes damage during transportation.

Scope of Responsibility

The manufacturer shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
After use, damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

Sheet parts: 1 month from the date of purchase.
Electrical parts: 1 month from the date of purchase.

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

If you have purchased and have simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

If your item is defective in any way, i.e. it doesn't work but you can't identify why, in the first instance, please contact customer support.

DAMAGED ITEMS

If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.

AFTER-SALES CONTACT

Email: adelahu@fufugaga.com

Phone: 208-820-0068

	Product Warranty Statement - No Express Warranties This document outlines the warranty terms for the product, stating it is provided without express or implied warranties and that no returns, refunds, or exchanges will be accepted.
	Installation Guide - Product Manual This manual provides step-by-step instructions for the installation and assembly of the product. It includes a parts list, tool requirements, safety warnings, and assembly procedures for a dresser or storage cabinet.
	Product Use and Care Manual - Furniture Maintenance Guide A comprehensive guide for the proper use and care of furniture, covering cleaning, hardware checks, wood care, weight limits, winter storage, and assembly instructions. Essential maintenance tips for longevity.
	Product Instruction Manual - Assembly Guide A comprehensive guide for the safe and efficient assembly of your new product. This manual provides essential safety information, step-by-step instructions, and tips for a smooth assembly process.
	Product Warranty Information Details on the 1-month limited warranty coverage, claim process, remedies, exclusions, post-warranty support, limitations, transferability, and governing law for the product.
	Product Installation Guide - Assembly and Usage Information Provides essential information for installing a product, directing users to the included installation guide for assembly and usage. Offers email support for questions.
	Product Warranty Information and Support Detailed warranty terms for products, including coverage, exclusions, and contact information for support and issue resolution.
	Use & Care Manual for General Product Comprehensive guide for the safe use, assembly, cleaning, maintenance, and storage of your product. Includes warranty information.