Installation Guide: Y-DC-1201 Floating TV Stand Shelf
This document provides detailed instructions for assembling and installing the Y-DC-1201 floating TV stand shelf. It includes a comprehensive parts list, step-by-step assembly guidance, and crucial information for secure wall mounting, ensuring proper alignment and stability for your entertainment unit.
Wall Mounting Considerations
Before installation, consider the type of wall you are mounting to:
- For solid brick walls, load-bearing walls, and fired hollow brick walls, the unit is equipped with 10mm wall fittings (screws and anchors).
- If mounting to a wooden wall, ensure the wooden board is at least 15mm thick. In this case, you will need to purchase suitable automatic screws separately.
Visual Description: Diagrams show a screw and a wall plug (anchor), and a screw suitable for wooden walls. A ruler graphic indicates a minimum thickness of 15mm.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1001 | Cam Bolt | 16x |
| 1002 | Cam Lock | 16x |
| 1003 | Wooden Dowel | 4x |
| 1004 | Long Screw | 8x |
| 1005 | Short Screw | 12x |
| 1006 | Medium Screw | 2x |
| 1007 | Wall Screw | 6x |
| 1008 | Wall Plug (Anchor) | 6x |
| 1009 | Hinge | 2x |
| 1010 | Handle | 1x |
| 1011 | Decorative Cap/Cover | 1x |
| 1012 | Internal Shelf/Divider | 1x |
Assembly Instructions
Step 1: Attach Hinges and Handle
Attach the hinges (1009) to the designated panel using short screws (1005) and medium screws (1006). Attach the handle (1010) to the drawer/door front.
Diagram Description: Shows hinges being screwed onto a panel, and a handle being attached to a drawer front.
Step 2: Connect Main Panels
Connect the main structural panels. Insert cam bolts (1001) into their respective holes. Align panels and secure by inserting cam locks (1002) into the corresponding holes and tightening them with a screwdriver.
Diagram Description: Illustrates connecting two large panels using cam bolts and cam locks.
Step 3: Insert Dowels
Insert wooden dowels (1003) into the designated holes on one panel. Align this panel with its mating part and press together to join.
Diagram Description: Shows dowels being inserted into a panel before connecting it to another.
Step 4: Assemble Structural Components
Assemble smaller structural components as shown, using appropriate fasteners.
Diagram Description: Depicts the assembly of smaller connecting pieces, likely forming internal supports.
Step 5: Attach Side Panels
Attach the side or support panels to the main structure using screws (likely 1005 or 1006).
Diagram Description: Shows side panels being attached to the main body of the unit.
Step 6: Secure Bottom Panel
Secure the bottom panel to the assembled structure using long screws (1004).
Diagram Description: Illustrates the bottom panel being attached with long screws.
Step 7: Attach Door Hinges
Attach the hinges (1005) to the door panel.
Diagram Description: Shows hinges being screwed onto the door panel.
Step 8: Secure Internal Components
Continue securing internal components and connections using cam locks (1002) and other fasteners.
Diagram Description: Shows cam locks being used to secure various internal parts of the unit.
Step 9: Complete Internal Structure
Complete the internal structure, potentially installing the shelf (1012) or other internal fittings using cam locks (1002).
Diagram Description: Shows the final internal configuration, including the shelf.
Step 10: Mark Wall Mounting Position
Prepare for wall mounting. Locate the desired position on the wall and mark the mounting holes on the furniture unit, using a spirit level for accuracy.
Diagram Description: Shows the unit positioned against a wall with a spirit level indicating alignment, and marks being made for drilling.
Hinge Adjustment
The hinges allow for precise adjustment of the door position.
- Adjust left/right: Turning the designated screw allows for horizontal adjustment of the door.
- Adjust Height: Turning the designated screw allows for vertical adjustment of the door.
- Adjust front/back: Turning the designated screw allows for adjustment of the door's depth.
Diagram Description: Close-up views of a hinge show three adjustment screws. Arrows indicate the direction of door movement (left/right, up/down, forward/backward) corresponding to each screw.
Wall Mounting
Step 11: Prepare Wall for Mounting
Make 10mm expansion holes on the wall at the marked locations. Insert the wall plugs (1008) into these holes.
Diagram Description: Shows a drill making holes in a wall and wall plugs being inserted.
Step 12: Mount Unit to Wall
Mount the furniture unit to the wall by aligning the unit's mounting points with the wall plugs and securing it with wall screws (1007).
Diagram Description: Illustrates the unit being attached to the wall using screws that go into the wall plugs.
Step 13: Final Assembly
Attach the decorative cap/cover (1011) to its designated spot. The internal shelf/divider (1012) should be in place. The unit is now fully assembled.
Diagram Description: Shows the completed floating TV stand shelf unit with all parts installed.
