Mcombo 6151-HQ304 Living Room Chair
Assembly Instructions and Warranty Information
Congratulations!
Mcombo Accent Chair - a name synonymous with classic design and the carrier of value and quality. Our products are directly from factory and eliminated the cost of middlemen. The Accent Chair is a high-quality shading solution to enhance comfortable feelings as you try to enjoy the nice day.
Warranty
- All warranties are to the original purchaser from MCOMBO ONLY ®
- MCOMBO® will replace the defective parts or send replacement item provided that the warranty parts have not been subjected to misuse, abuse or improper service by the consumer, for example, damaged wire arising in consequence of negligence or improper operation.
- MCOMBO® All of chairs come with a 30-day return/replace policy. During this time, we will cover the shipping cost of return and replacement for defective and damaged item, through provide pre-paid return label or pick up service for customer's convenience.
Parts List
Note: The vacuum package allows 48 hours to restore original thickness after opening package. If you want to accelerate this process, please pat it.
- A*1 Right Arm Frame Rectangular metal frame forming the right side and base of the chair.
- B*1 Left Arm Frame Rectangular metal frame forming the left side and base of the chair.
- C*1 Back Pad Flat, rectangular pad for the chair back.
- D*1 Seat Pad Flat, rectangular pad for the chair seat.
- E*1 Right Armrest Shaped piece forming the right armrest.
- F*1 Left Armrest Shaped piece forming the left armrest.
- G1*1 Back Cushion Insert Soft, padded insert for the back cushion.
- G2*1 Back Cushion Cover Fabric cover for the back cushion.
- H1*1 Seat Cushion Insert Soft, padded insert for the seat cushion.
- H2*1 Seat Cushion Cover Fabric cover for the seat cushion.
Hardware List
- J*6 Screw M6*20mm Short screw (6mm diameter, 20mm length).
- K*4 Screw M6*45mm Long screw (6mm diameter, 45mm length).
- M*4 Screw M6*30mm Medium screw (6mm diameter, 30mm length).
- N*1 Allen Wrench L-shaped hexagonal wrench for screws.
Assembly Instructions
Please remove all protective foam.
Step 1
Use Screws #M to fix Arm Frame #A and #B to Seat Pad #D with Allen Wrench #N. Use Screws #K to assemble Arm Frame #A & #B, Seat Pad #D and Back Pad #C together.
Diagram shows the base frame (A, B, D) being assembled with screws M and K, and the back pad (C) being attached.
Step 2
Use Screws #J to fix Left and Right Armrest #F & #E on the Left and Right Arm Frame #B & #A with Allen Wrench #N.
Diagram shows the armrests (E, F) being attached to the assembled frame using screws J and Allen wrench N.
Step 3
Unzip Seat Cushion Cover #H2 and put Seat Cushion Insert #H1 in Seat Cushion Cover #H2.
Diagram shows the seat cushion insert (H1) being placed inside its fabric cover (H2).
Step 4
Unzip Back Cushion Cover #G2 and put Back Cushion Insert #G1 in Back Cushion Cover #G2.
Diagram shows the back cushion insert (G1) being placed inside its fabric cover (G2).
Enjoy Your Chair
Congratulations! Now you can relax your body on this chair and even decorate your living room.
KINDLY REMINDER If you have any questions about the product or use, please feel free to contact sales@mcombo.com