IKEA LACK Wall Shelf
Design and Quality IKEA of Sweden
Important Safety Information
WARNING!
Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Assembly Steps
The following instructions are a general guide. Ensure you use appropriate wall fixings for your specific wall type.
-
Mark a line on the wall at the desired height for the shelf. Ensure the line is level using a spirit level. The diagram shows a measurement of 225 mm (8 7/8").
-
Attach the wall bracket(s) to the wall using appropriate screws and wall plugs (not included). The diagram shows two screws being used for attachment. Ensure the bracket is securely fastened.
-
Place the shelf onto the attached bracket(s). The diagram shows the shelf being placed onto the bracket and secured with screws from underneath.
Note: Always use the provided wall attachment devices. If you are unsure about the correct wall fixings, consult a professional.
