LACK Wall Shelf
Assembly Instructions and Safety Information
Important Safety Warning
⚠️ WARNING!
Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.
Screws and plugs for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screws and plugs suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
This warning is provided in multiple languages to ensure understanding.
Preparation and Tools
Before starting assembly, ensure you have the necessary tools and materials. The following visual indicates the tools required:
Illustration: A person is shown with a spirit level, a pencil, and a tape measure, preparing to mark the wall for mounting.
Note: Screws and wall plugs suitable for your specific wall type and the intended load are not included and must be purchased separately.
Assembly Instructions
Step 1: Mark the Wall
Illustration: Shows a person marking points on a wall using a level and pencil. A tape measure is visible, indicating a distance of 225 mm (8 7/8 inches) between points.
Measure and mark the desired position on the wall. Use a spirit level to ensure the marks are horizontal. The recommended spacing for the wall fixings is approximately 225 mm (8 7/8 inches) apart.
Step 2: Attach Shelf to Wall
Illustration: Depicts the process of attaching the shelf to the wall. It shows screws being inserted into wall plugs (not included) in the wall. The shelf is then shown being secured to these fixings. Icons are present indicating correct (check mark) and incorrect (cross mark) methods for attaching the shelf and for the screws/plugs themselves.
Insert appropriate wall plugs (not included) into the marked holes. Secure the shelf to the wall using screws (not included) that are suitable for your wall material and the intended load. Ensure the shelf is firmly attached. Pay attention to the icons indicating the correct type of fixings to use.
