Belnick Full Platform Bed with Headboard
Assembly Instructions
Before You Begin: (Phillips screwdriver required, not included)
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.
Caution: Tighten all components securely before use. Failure to do so may result in personal injury. DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Warning: CHOKING HAZARD - Small Parts. Adult Assembly Required. DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE. Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision. To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.
Customer Service Email: CustomerExperience@belnick.com | Phone: 866-552-2810
Model Numbers: MG-09004FB-F-OAK-GG / MG-09004FB-F-DKBRN-GG
Congratulations!
You just purchased a piece of happiness. At Belnick, we believe you can transform your spaces into the most inspired places with furnishings that are the perfect combination of form, function and style. As original innovators of online furniture retail, we offer the best selection of popular, contemporary styles at cool, comfortable prices. And, with decades of proven shipping and packaging expertise, our Extended Quality Checklist ensures a rewarding, hassle-free experience time and time again. It's just what you need to bring your vision to life.
Thank you & Enjoy!!
Your friends at Belnick
LIKE IT!
? Share it on social & Tell a friend! #Spaces2Places
LOVE IT!
❤️ Write an online product review where purchased
NOT SURE?
❓ Let us help! Contact our customer support.
Have a question, concern or simply need a hand? Your satisfaction is our top priority. Contact us at 866-552-2810 or customerexperience@belnick.com. We're here to help!
Browse Our Branded Collections
There's something for everyone inside our family of brands.
- Flash Furniture
- Masada Rugs
- Merrick Lane
- Emma+Oliver
- Taylor + Logan
- BlackArc
Visit www.belnick.com/brands or scan this code to go even faster!
About Belnick
ONE VISION. ENDLESS POSSIBILITIES.
We pride ourselves on providing an excellent customer experience starting right here with your package and instructions. Everything you need should be right where you need it, so you can get to enjoying your new item ASAP. But despite our best efforts, sometimes "slips happen." If you need any support, from replacement parts to recommendations, please reach out to our wonderful customer support team at 866-552-2810 or customerexperience@belnick.com. We're here to help!
EVERY BELNICK PRODUCT
- ✅ Quality & Durability Tested
- ? Packaged with Care
- ?? Shipped from our U.S. Facility
- ? Designed for Easy Assembly
- ? Ethically Sourced
Please visit https://www.belnick.com/warranty for complete warranty information.
Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death. Keep this manual in a safe location for future reference.
Part List
| Identifier | Description | Quantity |
|---|---|---|
| A | Headboard Panel | 1 |
| B | Headboard Support | 1 |
| C | Footboard Panel | 1 |
| D | Side Rail (L) | 2 |
| E | Side Rail (R) | 2 |
| F | Center Support | 2 |
| G | Support Leg | 6 |
| H1 | HB Post Left | 1 |
| H2 | HB Post Right | 1 |
| J1 | FB Post Left | 1 |
| J2 | FB Post Right | 1 |
| K | Support Bars | 2 |
| L | Bed Slat | 2 sets |
Hardware List
| Number | Description | Quantity |
|---|---|---|
| 1 | M6 x 15mm JCBC | 8 |
| 2 | M6 x 40mm JCBC | 12 |
| 3 | M6 x 50mm JCBC | 4 |
| 4 | M6 x 90mm JCBC | 16 |
| 5 | M6 x 100mm JCBC | 4 |
| 6 | Barrel Nut | 20 |
| 7 | Adjustable Foot | 10 |
| 8 | Wood Screw (M4 x 32mm) | 16 |
| 9 | Wood Dowel (10x40mm) | 8 |
| 10 | 7001 Metal Bracket | 2 |
| 11 | Spring Washer (M6) | 4 |
| 12 | Flat Washer (M6) | 8 |
| 13 | Flat Washer (M8) | 4 |
| 14 | JCN NUT | 4 |
| 15 | M4 Allen Key | 1 |
Assembly Steps
Step 1: Assemble Headboard Support to Posts
Attach the Headboard Support (B) to the left and right HB Posts (H1 & H2). Secure using hardware (refer to diagram for specific bolts/nuts like 4, 6, 9, 15). Attach the Adjustable Feet (7) to the bottom of the HB Posts (H).
Step 2: Assemble Headboard Panel to Posts
Assemble the Headboard Panel (A) to the left and right HB Posts (H1 & H2). Secure using hardware (refer to diagram for specific bolts/washers like 2, 11, 12, 15).
Step 3: Assemble Footboard Panel to Posts
Assemble the Footboard Panel (C) to the left and right FB Posts (J1 & J2). Secure using hardware (refer to diagram for specific bolts/nuts like 4, 6, 9, 15). Attach the Adjustable Feet (7) to the bottom of the FB Posts (J).
Step 4: Attach Side Rails to Brackets
Attach Side Rails (D & E) using Metal Brackets (10) and Bolts (1). Ensure two sets are prepared (2x).
Step 5: Connect Side Rails to Headboard and Footboard
Assemble the Side Rails (D & E) to the Headboard Panel (A) and Footboard Panel (C). Secure using hardware (refer to diagram for specific bolts/nuts like 4, 6, 9, 15).
Step 6: Attach Support Legs and Center Support
Attach the Adjustable Feet (7) to the bottom of the Support Legs (G). Attach the Support Legs (G) through the Bed Slats (L) and into the Center Support (F). Secure using hardware (refer to diagram for specific bolts/nuts like 5, 6, 15).
Step 7: Attach Bed Slats to Side Rails
Attach the Bed Slats (L) to the Side Rails (D & E) using Bolts (2) and Wood Screws (8).
Step 8: Attach Support Bars and Feet to Support Legs
Attach Support Bars (K) to the Support Legs (G). Then, attach the Adjustable Feet (7) to the bottom of the Support Legs (G). Secure using hardware (refer to diagram for specific bolts/nuts like 4, 6, 15).
Step 9: Bolt Support Bar to Bed Slats
Bolt the Support Bar (K) to the Bed Slats (L) using Bolts (3) and hardware (refer to diagram for specific washers/nuts like 12, 13, 14, 15).
Quality and Safety Guidelines
- Please use this item on a stable, level surface only. If any of the legs of this product are not contacting the flooring surface, do not use. Do not use this item if any instability is detected.
- Carefully follow all of the assembly instructions. If all of the parts are not provided, please do not use this item. Please email us at customerexperience@belnick.com or call 866-552-2810 for assembly instructions.
- This item is intended for indoor use. Store indoors also.
- This item is intended for lying down; do not jump, climb or stand on this item.
- For product longevity, product safety and product integrity, please email us at customerexperience@belnick.com or call 866-552-2810 for storage instructions.
- Please visit www.Belnick.com for our product warranty details or email us at customerexperience@belnick.com or call 866-552-2810.
- For maintenance instructions and replacement parts, please email us at customerexperience@belnick.com or call 866-552-2810.
- Please follow the static and dynamic weight capacity limits provided on this item. If you are unsure of the weight capacities for this product, email us at customerexperience@belnick.com or call 866-552-2810.
