Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.
Caution:
- Tighten all components securely before use. Failure to do so may result in personal injury.
- DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping and causing any accidental injury, instability, death or damage. The tipping restraint is intended only as a safety measure; it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it must be permanently fixed to the wall. Fixing devices for the wall are not included since different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home.
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Congratulations!
You just purchased a piece of happiness. At Belnick, we believe you can transform your spaces into the most inspired places with furnishings that are the perfect combination of form, function and style. As original innovators of online furniture retail, Belnick offers the best selection of popular, contemporary styles at cool, comfortable prices. And, with decades of proven shipping and packaging expertise, Belnick's Extended Quality Checklist ensures a rewarding, hassle-free experience time and time again. It's just what is needed to bring a vision to life.
Thank you & Enjoy!!
your friends at Belnick
LIKE IT!
Share it on social & Tell a friend!
#Spaces2Places
LOVE IT!
Write an online product review where purchased
NOT SURE?
Let Belnick help!
Contact Belnick's customer support.
Belnick prides itself on providing an excellent customer experience starting right here with the package and instructions. Everything needed should be right where it is, so customers can get to enjoying their new item ASAP. But despite best efforts, sometimes "slips happen." If support is needed, from replacement parts to recommendations, please reach out to Belnick's wonderful customer support team at 866-552-2810 or customerexperience@belnick.com. Belnick is here to help!
EVERY BELNICK PRODUCT
- Quality & Durability Tested
- Packaged with Care
- Shipped from Belnick's U.S. Facility
- Designed for Easy Assembly
- Ethically Sourced
Please visit https://www.belnick.com/warranty for complete warranty information.
Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death. Keep this manual in a safe location for future reference.
Part
Part 1: Left & Right Side Rails
Description: Long, rectangular wooden or metal rails with pre-drilled holes for connections. Quantity: 4 pcs
Part 2: Headboard
Description: A large, upholstered rectangular panel, forming the top section of the bed. Quantity: 1 pc
Part 3: Footboard Legs
Description: Solid, rectangular legs, typically made of wood or composite material, designed to support the footboard. Quantity: 2 pcs
Part 4: Headboard Legs
Description: Long, slender rectangular supports, likely metal or wood, extending downwards from the headboard. Quantity: 2 pcs
Part 5: Left & Right Side Legs
Description: Vertical supports with pre-drilled holes, likely metal, for attaching to the side rails. Quantity: 2 pcs
Part 6: Center Legs
Description: Square or rectangular vertical supports, typically metal, for central bed support. Quantity: 4 pcs
Part 7: Center Rail
Description: A long, slender rail, likely metal, designed to run down the center of the bed frame for slat support. Quantity: 2 pcs
Part 8: Support Slats
Description: Multiple wooden or metal slats, often connected by fabric webbing, forming the bed base. Quantity: 2 pcs (sets)
Part 9: Footboard
Description: A rectangular panel, typically upholstered, forming the bottom section of the bed. Quantity: 1 pc
Part 10: Headboard Wings
Description: Two slender, rectangular upholstered pieces designed to attach to the sides of the headboard. Quantity: 2 pcs
Hardware
Part A: M8 x 35mm Screws
Description: Standard screws with a hexagonal head. Quantity: 10 pcs
Part B: M8 x 1mm Large Lock Washer
Description: A circular washer with a split, designed to prevent loosening. Quantity: 10 pcs
Part C: M8 x 1mm Large Flat Washer
Description: A flat, circular washer for distributing load. Quantity: 10 pcs
Part D: M6 x 23mm Adjustable Height Glides
Description: Small, threaded feet that can be adjusted for height. Quantity: 8 pcs
Part E: M8 x 20mm Screws
Description: Shorter screws with a hexagonal head. Quantity: 8 pcs
Part F: M6 x 45mm Screws
Description: Medium-length screws with a hexagonal head. Quantity: 4 pcs
Part G: M6 x 50mm Screws
Description: Longer screws with a hexagonal head. Quantity: 4 pcs
Part H: M6 x 25mm Screws
Description: Shorter screws with a hexagonal head. Quantity: 8 pcs
Part I: M30 Self Tapping Screw
Description: Screws designed to tap their own threads into material. Quantity: 8 pcs
Part J: M6 x 1mm Small Lock Washer
Description: A smaller circular washer with a split. Quantity: 12 pcs
Part K: M6 x 1mm Small Flat Washer
Description: A smaller flat, circular washer. Quantity: 12 pcs
Part L: M4 x 95mm Small Allen Wrench
Description: An L-shaped tool for hexagonal sockets. Quantity: 1 pc
Part M: M5 x 95mm Large Allen Wrench
Description: A larger L-shaped tool for hexagonal sockets. Quantity: 1 pc
Part N: M6 x 100mm Bolts
Description: Very long bolts with a hexagonal head. Quantity: 2 pcs
Assembly Steps
Step 1: Attach Headboard Wings to Headboard
NOTE: Unzip liner to access screw holes.
Attach the Headboard Wings (Part 10) to both sides of the Headboard (Part 2) using (4) M8x35mm Screws (Part A), (4) M8x1mm Large Lock Washers (Part B), and (4) M8x1mm Large Flat Washers (Part C). Tighten using M5 Large Allen Wrench (Part M).
Diagram shows the Headboard (2) with Headboard Wings (10) being attached to its sides. Screws (A), lock washers (B), and flat washers (C) are inserted through the wing into the headboard. An M5 Large Allen Wrench (M) is used for tightening.
Step 2: Attach Adjustable Height Glides to Headboard Legs and Headboard Wings
Attach (2) M6x23mm Adjustable Height Glides (Part D) to Headboard Legs (Part 4) and (2) to Headboard Wings (Part 10).
Diagram illustrates the attachment of adjustable glides (D) to the bottom of Headboard Legs (4) and Headboard Wings (10). The glides are small, threaded feet.
Step 3: Attach Headboard Legs to Headboard
Attach the Headboard Legs (Part 4) to the Headboard (Part 2) using (6) M8x35mm Screws (Part A), (6) M8x1mm Large Lock Washers (Part B), and (6) M8x1mm Large Flat Washers (Part C). Tighten using M5 Large Allen Wrench (Part M).
Diagram shows the Headboard Legs (4) being attached to the lower part of the Headboard (2). Screws (A), lock washers (B), and flat washers (C) are used for this connection. The M5 Large Allen Wrench (M) is depicted for tightening.
Step 4: Attach Side Legs to Side Rails
Attach (2) Side Legs (Part 5) to the Left and Right Side Rails (Part 1) using (8) M6x25mm Screws (Part H), (8) M6x1mm Large Lock Washers (Part J) and (8) M6x1mm Large Flat Washers (Part K). Tighten using M4 Small Allen Wrench (Part L).
Diagram shows the Side Legs (5) being attached to the Side Rails (1). Screws (H), lock washers (J), and flat washers (K) are used for the connection. The M4 Small Allen Wrench (L) is shown for tightening.
Step 5: Attach Adjustable Height Glides to Side Legs
Attach (2) M6x23mm Adjustable Height Glides (Part D) to Side Legs (Part 5).
Diagram shows the adjustable glides (D) being screwed into the bottom of the Side Legs (5).
Step 6: Attach Footboard Legs to Footboard
Attach Footboard Legs (Part 3) to Footboard (Part 9) using (2) M6x100mm Bolts (Part N). Tighten using M4 Small Allen Wrench (Part L).
Diagram shows the Footboard Legs (3) being attached to the Footboard (9) using long bolts (N). The M4 Small Allen Wrench (L) is used for tightening.
Step 7: Attach Adjustable Height Glides to Footboard Legs
Attach (2) M6x23mm Adjustable Height Glides (Part D) to Footboard Legs (Part 3).
Diagram shows the adjustable glides (D) being screwed into the bottom of the Footboard Legs (3).
Step 8: Attach Side Rails to Headboard Legs
Attach the Left and Right Side Rails (Part 1) to the Headboard Legs (Part 4) using (4) M8x20mm Screws (Part E). Tighten using M5 Large Allen Wrench (Part M).
Diagram shows a close-up view of the connection point where a Side Rail (1) meets a Headboard Leg (4). Screws (E) are used to secure this connection. The M5 Large Allen Wrench (M) is indicated for tightening.
Step 9: Attach Side Rails to Footboard
Attach Left and Right Side Rail to Footboard (Part 9) using (4) M8x20mm Screws (Part E). Tighten using M5 Large Allen Wrench (Part M).
Diagram shows a close-up view of the connection point where a Side Rail (1) meets the Footboard (9). Screws (E) are used to secure this connection. The M5 Large Allen Wrench (M) is indicated for tightening.
Step 10: Attach Side Rails to Headboard Wings
Attach Left and Right Side Rails to Headboard Wings using (4) M6x45mm Screws (Part F), (4) M6x1mm Small Lock Washers (Part J) and (4) M6x1mm Small Flat Washers (Part K). Tighten using M4 Small Allen Wrench (Part L).
Diagram shows a close-up view of the connection point where a Side Rail (1) meets a Headboard Wing (10). Screws (F), small lock washers (J), and small flat washers (K) are used for this connection. The M4 Small Allen Wrench (L) is indicated for tightening.
Step 11: Insert Screws through Support Slats and Center Rails to Center Legs
Insert (4) M6x50mm Screws (Part G) through the Support Slats (Part 8) and the Center Rails (Part 7) and attach to the Center Legs (Part 6). Tighten using M4 Small Allen Wrench (Part L).
Note: Fabric straps on the support slat will face the floor.
Diagram shows the Support Slats (8) resting on the Center Rails (7), which are supported by the Center Legs (6). Screws (G) are inserted from the top, through the slats and rails, into the center legs. The M4 Small Allen Wrench is shown for tightening.
Step 12: Attach Support Slats to Side Rails
Attach (2) sets of Support Slats (Part 8) to the Left & Right Side Rails (Part 1) using (8) M30 Self-Tapping Screws (Part I). Tighten using a Phillips Screwdriver (Not Included).
Diagram shows the fully assembled bed frame with the Support Slats (8) laid across the frame. Self-Tapping Screws (I) are used to secure the slats to the Left & Right Side Rails (1). A Phillips screwdriver is indicated for tightening.
