Lennox VLOD009S6-5P VRF Low Static Ducted Unit
Submittal Data
Powered by SAMSUNG
Product Overview
This document provides submittal data for the Lennox VLOD009S6-5P VRF Low Static Ducted Unit, detailing its features, specifications, construction, and available accessories.
General Information
- Compatible with R-32 VRF air, water, and mini-VRF systems.
- Features an integral condensate pump with a maximum 29" lift, equipped with a check valve and float switch to disable the unit in the event of condensate overflow.
- Includes a built-in Wi-Fi adapter as standard, enabling control and monitoring via the Samsung SmartThings app.
Construction
- Constructed from insulated, galvanized steel.
Refrigerant System
- The heat exchanger utilizes a mechanically bonded aluminum fin to copper tube design.
- Refrigerant flow is managed by an electronic expansion valve located at the indoor unit.
- The unit is equipped with an R32 alarm output plug for simple notification or interlock of third-party equipment upon R32 leak detection (requires VSTAT10P-1 accessory).
Indoor Fan
- Offers three fan speeds and an auto setting.
Controls
- Control wiring uses 2 x 16 AWG wire.
- Operation is managed via a wired remote controller, model VSTAT04P-1, which must be purchased separately.
- Supports dual set temperature when connected to compatible controllers.
- Wired or wireless controllers are available and must be purchased separately.
External Heat Control
- Provides external heat control functionality for configuring fan operation during auxiliary heat, defrost, and emergency heat cycles (requires VSTAT10P-1 accessory).
- Configuration settings include options for outside ambient external heat lockout, outside ambient compressor lockout, and time delay (requires VSTAT10P-1 accessory).
- Emergency heat functionality ensures the system continues to control the external heat source even when system errors prevent the heat pump from operating (requires VSTAT10P-1 accessory).
Convenience Features
- The Emergency Temperature Output (ETO) function provides a signal to an external source (e.g., backup system, building management system, alert device) when the indoor unit is in an error status or when the room temperature exceeds a configurable level.
Certifications
The unit is Intertek ETL Listed and AHRI Certified® for Unitary Small HP, adhering to AHRI Standard 210/240.
Note: Lennox maintains a policy of ongoing development. Specifications are subject to change without notice.
Specifications
| Feature | Value |
|---|---|
| Indoor Unit Model Number | VLOD009S6-5P |
| Nominal Capacity (Cooling) | 9,500 Btu/h |
| Nominal Capacity (Heating) | 10,500 Btu/h |
| Voltage | 1 / 208-230 / 60 Hz |
| Operating Current (max.) (Cooling) | 0.33 A |
| Operating Current (max.) (Heating) | 0.33 A |
| MCA | 0.57 A |
| MOP | 15 A |
| Fan Type | BLDC (1) With Sirocco Fan (2) |
| Consumption | 84 Watts |
| Evaporator Fan Static Pressure (Standard) | 0.04 "WC |
| Evaporator Fan Static Pressure (Min. / Max.) | 0 / 0.16 "WC |
| Airflow (Cooling) | 353 / 388 / 459 CFM (Low/Med/High) |
| Airflow (Heating) | 353 / 388 / 459 CFM (Low/Med/High) |
| Refrigerant Type | R-32 |
| A2L Leak Detection | Integral |
| Refrigerant Pipe Connections (High side) | 1/4" |
| Refrigerant Pipe Connections (Low side) | 1/2" |
| Condensate Connection | 1 1/4 in. OD, 1 in. ID |
| Dimensions (W x H x D) | 43 5/16" x 7 13/16" x 17 5/16" |
| Weight | 49.60 lbs. |
| Duct Connections (Supply) | 37 1/16" x 5 7/8" |
| Duct Connections (Return) | 38 1/2" x 6 5/8" (inside) |
| Sound Pressure Level (Low / Med. / High) | 23 / 25 / 27 dB(A) |
| Safety Certifications | UL 60335-2-40 |
Accessories
VLOD009S6-5P Accessories
- Filter box: V1FBX06-4P
- Wired controller (Advanced): VSTAT04P-1
- Wired controller (Touchscreen): VSTAT02P-1
- Thermostat adapter (for connection to standard 24VAC thermostats): VSTAT09P-1
- Wireless signal receiver: VCTRL10P-1
- Wireless signal control: VSTAT01P-1
- Wireless controller: VCTRL11P-1
- External temperature sensor: VSTAT10P-1
- External contact control interface module: JV DB39-01263A CN83 Pigtail
- CN83 Pigtail (for 12VDC VENT output): JV DB39-01263A CN83 Pigtail
Dimensional Drawing
The unit is a low-profile ducted unit with approximate overall dimensions of 43 5/16 inches (width) x 7 13/16 inches (height) x 17 5/16 inches (depth). Key connection points and features are indicated:
| No. | Description |
|---|---|
| 1 | Liquid pipe connection (1/4") |
| 2 | Gas pipe connection (1/2") |
| 3 | Gravity drain connection |
| 4 | Drain connection |
| 5 | Opening for power and communication wire conduit |
| 6 | Supply air outlet flange |
| 7 | Return air (air inlet) |
| 8 | Suspension bolt anchor point |
The drawing illustrates the unit's profile for ceiling or concealed installation, showing air inlet and outlet locations, pipe connection points, and mounting provisions.
