WYBOT Robotic Pool Cleaner User Manual

Read through the entire manual before running your new robotic pool cleaner, and keep this manual handy for your reference.

Copyright© 2024 WYBOTICS Co., Ltd. All Rights Reserved.

Contact Information

Website: www.wybotpool.com

Email: support@wybotpool.com

Facebook: @WybotPool

Manufacturer: WYBOTICS CO.,LTD

Address: No.30, Zhongnan 4th Street West Zone, TEDA Tianjin, China

All trade names are registered trademarks of respective manufacturers listed.

[FCC logo] [Intertek logo] [Recycling symbol] [WEEE symbol] [CE logo] [RoHS logo] [Other certification logos]

[Umbrella symbol] [Fragile symbol] [Upward arrows symbol] [Fragile symbol] [Hand with arrow symbol] [Blue bin symbol] PAPER [French recycling information]

Welcome

Thank you for choosing WYBOT products. Your support means a lot to us. Continuously providing the best solution to free you up from pool cleaning and enjoy your family time is always our pursuit.

The WYBOT Robotic Pool Cleaner is dedicated to serving you with high efficiency, low power consumption, easy operation, and thorough pool cleaning work.

Its unique appearance and reliable functions, such as one-button activation, powerful suction and scrubbing, fine filtration, smart navigation, remote control, and high compatibility with various pool shapes and construction materials, assure you a convenient, intelligent, and optimal pool cleaning experience.

Feel free to contact us by Email or visit our website with any questions. We are very glad to hear your advice on our continuous improvement.

Important Safety Information

Warning

Failure to operate the device as per the warnings can result in serious injury, electrocution, or death.

• Use only the accessories recommended or sold by WYBOTICS Co., Ltd.
• Use only the original and authorized charging station. Avoid charging any other types of devices with this station. Improper use may result in overheating or corrosive liquid leakage from the battery.
• Cut off power supply when doing any maintenance or removing it from the pool.
• In case of any abnormal operation from the charging station, cut off the power supply immediately, and remove the robotic cleaner from the station. Contact professionals at once.
• Make sure the electrical outlet is protected by a ground fault circuit interrupter (GFCI) and an earth leakage interrupter (ELI).
• Do not use a cord-damaged charger to avoid any electrical shock.
• Do not try to use a non-authorized extension cord to connect the charger to the station.
• Never allow children to ride on the cleaner/docking station or play with them as toys.
• Do not allow children to operate or maintain the device or docking station.
• Do not enter the pool when the cleaner is working in it.
• Never expose or charge the device in flammable environments.
• Only licensed professionals can disassemble the sealed parts of the cleaner/docking station.
• Do not operate the cleaner while the pool filter is running.

Caution

Failure to operate the device as per the warnings can cause damage to the device or personal damage.

• Firmly stick the station hook onto a flat wall with the tape included.
• If the pool liners comes away or is damaged, please repair it before sticking the charging station on the wall.
• Fully charge the unit before first use.
• Do not overcharge the cleaner, which will reduce the battery life.
• Charge the cleaner prior to being stored for a long time (over 6 months) to maintain an optimal battery life.
• Remember to wash and clean the filter basket after each use.
• Store the cleaner in a cool and ventilated place, away from direct sunshine or any heat source.
• Use only the pool cleaner in the following water conditions:
  • Chlorine: Max 4 mg/L
  • pH: 7.0 - 7.8
  • Temperature: 41-95 °F (5-35 °C)
  • NaCl: Maximum 5000 PPM

WYBOT S2PRO(WY210) AT A GLANCE

Product External Overview

a Start/Stop: Press to start/stop pool cleaning

b Indicator: Indicate status of the docking station

c Home: Press to call the cleaner back

d Handle: Remove and transport the device with it

e LED Indicator: Different light colors to indicate device status

f Cleaning Mode: Customize cleaning needs on the cleaner

g Charging Port: Connect the charger

h Pump: Pump out water through the window

i On/Off Button: Turn on/turn off the device

j Track: Enhance device's capability in climbing walls and various obstacles

k Scrubbing Brush: Knock loose all dirt and roll them all into the device

L Lid Open Button: Open the cover to take out the filter basket

m [Diagram of the robotic pool cleaner with labels a-m]

Product Internal Overview

m Sealed Part: Important components are sealed there. For your safety, do not try to disassemble it without authorization.

k Filter Basket (180µm): Store collected dirt and debris, need to be installed before cleaning, and washed after each use.

m Filter Foam (Cotton foam): An auxiliary filter to help trap the fine dirty particles. Recommend to use it for floor cleaning. Please do not install it when the pool water is heavy dusty, it may influence the operation of the cleaner.

Do not operate the device when the top cover or scrubbing brushes are broken. If there is any liquid leakage from the sealed part, stop charging or running the device.

Packing List

• Device x 1 [Image of device]
• Docking Station x 1 [Image of docking station]
• Filter x 2 [Image of filter]
• Hook x 1 [Image of hook]
• User Manual x 1 [Image of user manual]
• Quick Start Guide x 1 [Image of quick start guide]
• Charger x 1 [Image of charger]
• Floating Parts [Image of floating parts]
• Adhesive Tapes [Image of adhesive tapes]

INSTALL YOUR DOCKING STATION

WYBOT S2 Pro is equipped with a docking & wireless charging station that you can find in your package. You need to install this station onto your pool wall to create a good working condition for WYBOT S2 Pro. Please follow below steps.

1. Step 1: Take out three included adhesive gel nano tapes, and stick them onto the marked area on the station hook back side. [Diagram showing tape application]
2. Step 2: Find a flat wall 20mm above the waterline with a smoother surface and less dirt. Use a cloth to dry the surface. Ensure the area is not smaller than the hook. [Diagram showing wall preparation]
3. Step 3: Adhere the station hook onto the tape that you have sticked firmly and horizontally. [Diagram showing hook attachment]
4. Step 4: Place the main body of the station onto the hook. [Diagram showing station body attachment]

Note:

• This charging station is suggested to be sticked onto a flat and smooth wall surface; rough surfaces such as pebble material may not work very well.
• The station hook bottom shall be 20mm higher than the waterline.
• The water depth of the installation area shall reach 1.2m at least, and there should be no steps, sitting area, or light under the docking station.

Step 5: Insert the included extended charging line to the socket on the line of the station. [Diagram showing charging line insertion]

Step 6: Stretch out the charging line and plug the adaptor into a power outlet that should be at least 3.5m (11.5ft) away from the pool. [Diagram showing power outlet connection]

Step 7: Plug the adaptor into a power supply, and the LED indicators turn solid blue. [Diagram showing power supply connection and LED indicators]

Note:

• It is highly recommended to install the docking station of the WYBOT S2Pro onto a pool wall of regular shape pool, otherwise it may affect the working of it.
• Double check the connections before starting the cleaning.

GET STARTED

Charge your new WYBOT S2Pro(WY210)

The device has a lithium-ion rechargeable battery, and you need to charge the battery before first use or when the battery is low.

1. Step 1: Turn on the device and the indicators on the front turn solid blue. [Diagram showing device power on]
2. Step 2: Hold the handle of the cleaner, and put it into the pool vertically. [Diagram showing cleaner immersion]
3. Step 3: After 20s of self-calibration of the cleaner, press the home button to call it back to the docking station. [Diagram showing home button press]
4. Step 4: Start to fully charge itself automatically. [Diagram showing charging status]

Note:

• For reducing fire risk, keep your docking station beneath the water when starting charging.
• No charging devices on shore using docking station.

LED Indicator Guide

Note:

• For maintaining a favourite working status, you need to keep the docking station always being powered on.
• When yellow light flashes, the robotic pool cleaner will back to the docking station for the inductive charging.
• If red LED light is on, you can find solution from troubleshooting in this manual or call for service.

Setup your new WYBOT S2Pro(WY210)

HOW TO DETACH THE DOCKING STATION

1. Step 1: Hold the handle of the cleaner, and emerge it into pool water vertically. [Diagram showing cleaner immersion]
2. Step 2: Shake the cleaner horizontally to empty trapped air inside. [Diagram showing air emptying]
3. Step 3: Put the cleaner onto the docking station carefully or put it into the pool and call it to the docking station. [Diagram showing cleaner placement]
4. Step 4: Start to fully charge itself automatically and keep standing by for next cleaning cycle. [Diagram showing charging status]

To Detach the Docking Station:

1. Step 1: There are two small fasteners on the top of the docking station, and you can push them to remove the main part from the hook. [Diagram showing fastener release]
2. Step 2: Detach it successfully. [Diagram showing detached station]

Note:

• As electric components inside the docking station and cleaner, store the cleaner in a cool and ventilated place, away from direct sunshine or any heat source.
• Charge the cleaner prior to being stored for a long time (over 6 months) to maintain an optimal battery life.

CERTIFICATION

WYBOT robotic pool cleaners have passed all performance and reliability tests and also has obtained relevant certifications from the countries in which they are sold. You can rest assured.

[FCC logo] [Intertek logo] [Recycling symbol] [WEEE symbol] [CE logo] [RoHS logo] [Other certification logos]

[Umbrella symbol] [Fragile symbol] [Upward arrows symbol] [Fragile symbol] [Hand with arrow symbol] [Blue bin symbol] PAPER [French recycling information]

WYBOT CUSTOMER CARE

Due to the need for continuous products improvement, the products in the manual are subject to the real products, and WYBOTICS Co., Ltd. reserves the right to update products.

If you encounter any problems during use, please contact the after-sale team. For more details, please contact WYBOTICS website www.wybotpool.com

Wybot Customer Service:

Email: support@wybotpool.com

Facebook: @WybotPool

Tel: 1-866-777-6655

Document No. A202421002

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 20cm the radiator and your body. Use only the supplied antenna.