XTRFY M42 WIRELESS QUICK START GUIDE

Getting Started

Follow these steps to set up your Xtrfy M42 Wireless mouse.

Step 1: Connect the Receiver
Illustration showing the USB cable connected to the wireless receiver (dongle). The receiver is then plugged into a USB port on the computer.
Step 2: Prepare the Mouse
Illustration showing the USB cable and receiver being separated. The mouse is ready for wireless use.
Step 3: Power and Mode Switch
Illustration of the bottom switch. The switch has positions labeled: OFF, CPI, RGB, PGDN. The mouse has an ON/OFF indicator.
The switch controls the mouse's function: OFF (powers down), CPI (adjusts sensitivity), RGB (controls lighting effects), PGDN (Page Down function).

Battery and RGB Status

Indicators on the mouse show battery level and RGB status.

Battery Indicators:
[battery-low] 0-25%
[battery-medium] 26-50%
[battery-high] 51-75%
[battery-full] 76-100%
RGB Indicator: A separate indicator shows the status of the RGB lighting.

To activate the mouse or change settings, press and hold the DPI button for 3 seconds.

CPI (Sensitivity) Settings

Adjust the mouse sensitivity (Counts Per Inch) using the DPI button.

Pressing the DPI button cycles through the following settings:

[red] 400 CPI
[orange] 800 CPI
[blue] 1200 CPI
[purple] 1600 CPI
[cyan] 3200 CPI
[pink] 4000 CPI
[white] 7200 CPI
[yellow] 19000 CPI

Polling Rate Settings

Set the polling rate for responsiveness.

Pressing the PR button cycles through:

[red] 125 Hz
[blue] 500 Hz
[white] 1000 Hz

RGB Lighting Control

Customize the RGB lighting effects and colors.

Use the switch and buttons to cycle through different RGB effects and colors.

RGB Effects: Cycle through various lighting animations.

Color: Select specific colors for the lighting.

Brightness and Speed Adjustment

Adjust the brightness of the RGB lighting and the speed of effects.

Brightness: Use the plus [➕] and minus [➖] buttons to increase or decrease brightness.

Speed: Adjust the speed of RGB effects using the dedicated control.

Advanced Features

Lift-Off Distance:

Set the height at which the mouse sensor stops tracking when lifted.

[red] 1 MM
[blue] 2 MM

Debounce Time:

Adjust the debounce time to prevent accidental double clicks.

[red] 2 MS
[blue] 4 MS
[green] 8 MS
[purple] 12 MS

These settings are typically adjusted by holding a button combination for a specified duration (e.g., 3 or 5 seconds).

Factory Reset

To reset the mouse to its factory default settings, press and hold the DPI button for 5 seconds.

Weight Balance

The M42 Wireless allows for weight balance adjustment. This involves accessing internal components.

Illustration showing the bottom of the mouse. A screw is shown being removed with a tool. A measurement of 1mm is indicated, likely for screw depth or component placement.

Removing the Shell

To access internal components for weight balance or other adjustments, the top shell can be removed.

Illustration shows the bottom of the mouse with screws indicated. The top shell is shown being lifted off the mouse base.

Important Information

Charging: Charge the mouse exclusively via a computer USB port.

Full Manual: For detailed information, visit xtrfy.com/downloads.

Support: For assistance, contact support@xtrfy.com.

	Xtrfy M42 Wireless Mouse User Manual and Specifications Comprehensive guide to the Xtrfy M42 Wireless Mouse, covering its function layout, instructions for use, DPI settings, polling rate, wired/wireless functionality, charging indicators, pairing, shape and weight adjustments, and main technical specifications. Includes FCC compliance information.
	Xtrfy MZ1 Wireless Quick-Start Guide A quick-start guide for the Xtrfy MZ1 Wireless mouse, covering setup, DPI, polling rate, RGB effects, brightness, speed, lift-off distance, debounce, factory reset, and weight balance.
	Xtrfy MZ1 Wireless Mouse: Specifications, Features, and Setup Guide Comprehensive guide to the Xtrfy MZ1 Wireless Mouse (MZ1W-RGB), detailing its function layout, main specifications, wired/wireless modes, charging indicators, and FCC compliance information.
	XTRFY M4 Wireless Gaming Mouse Manual - Setup, Features, and Customization Detailed guide for the XTRFY M4 Wireless gaming mouse. Covers setup, polling rate, CPI, RGB lighting, lift-off distance, debounce, factory reset, weight balance, and shell removal. Essential information for optimal performance.
	Xtrfy M4 Wireless Mouse - User Guide and Specifications Detailed information on the Xtrfy M4 Wireless Mouse, including setup instructions, DPI settings, polling rate, main specifications, and FCC compliance.
	Xtrfy K3-RGB Quick Start Guide Quick start guide for the Xtrfy K3-RGB keyboard, covering initial USB connection, driver installation, RGB lighting controls, and media shortcuts. Download the full manual from XTRFY.COM for more details.
	Xtrfy K3-RGB Keyboard User Manual User manual for the Xtrfy K3-RGB keyboard, detailing installation, RGB LED illumination settings, function key shortcuts, troubleshooting, and technical specifications.
	Xtrfy K5 Compact Keyboard: User Manual, Features, and Customization Guide A comprehensive guide to the Xtrfy K5 Compact mechanical gaming keyboard. Learn about RGB lighting, macro programming, key functions, assembly, disassembly, and troubleshooting. Discover how to customize your gaming experience with detailed instructions.