Xtrfy M4 Wireless Mouse

Product Overview

The Xtrfy M4 Wireless Mouse is designed for performance and comfort. The document provides functional layout, setup instructions, specifications, and important safety information.

Function Layout

The mouse features a comprehensive button layout for versatile control:

• 1. Left click
• 2. Right click
• 3. Middle click
• 4. Forward button
• 5. Backward button
• 6. Setting button
• 7. Scroll up
• 8. Scroll down
• 9. Profile button
• 10. Power Off switch/mode
• 11. DPI Mode button
• 12. RGB Mode button
• 13. PGDN Mode button
• 14. Type-c connection port

Instruction

Mouse Setup

1. Take out the wireless USB Nano receiver from the package.
2. Plug the receiver into your computer's USB port.
3. Turn on the mouse by switching the power switch located on the bottom of the mouse.
4. Wait for the computer to finish installing the necessary drivers.

DPI Setting and Indication

The mouse offers multiple DPI levels for adjustable sensitivity:

• DPI Levels: 400, 800, 1200, 1600, 3200, 4000, 7200, 19000 DPI (total 6 selectable levels).
• Changing DPI: Press the setting button (button 6) on the top of the mouse while the mode switch is set to DPI mode to cycle through DPI levels.

Polling Rate Indication

The polling rate is indicated by LED colors:

• Red: 125 Hz
• Blue: 500 Hz
• Green: 1000 Hz

Mode Switch and Setting Function

The function of the setting button (button 6) changes based on the mode switch position:

• When the mode switch is in DPI mode: Setting button changes DPI.
• When the mode switch is in RGB mode: Setting button adjusts RGB lighting.
• When the mode switch is in PGDN mode: Setting button functions as PGDN.
• When the mode switch is in Power Off mode: The mouse is turned off.

Wired and Wireless Functionality

The mouse supports both wired and wireless modes, switching automatically:

• Wireless Mode: When the USB receiver is plugged into the computer without the cable connected, the mouse operates wirelessly.
• Wired Mode: Connecting the mouse to the computer via the USB cable automatically switches it to wired mode.

Low Power and Charging Indication

• Low Power: When the mouse battery is low, the LED will blink red. Recharge the mouse.
• Charging: While charging, the LED will blink yellow. Once fully charged, the LED will return to the normal RGB effect.

Pairing

If the connection is lost or a new receiver is used, follow the pairing tool instructions to pair the mouse and receiver.

About Shape Change and Weight Balance Adjustment

The mouse allows for customization of shape and weight balance:

• Shape Adjustment: Unscrew the back cover to swap different shape back shells.
• Button Customization: Remove and replace buttons from their end.
• Weight Balance: Unscrew the battery screw located under the mouse to move the battery forward or backward, adjusting the mouse's balance.

Main Specification

CAUTION

• ⚠️ Keep the battery dry.
• ⚠️ Avoid locating the battery terminals near metallic objects.
• ⚠️ Do not short-circuit the battery or allow metallic or water to come into contact with it, as this may cause battery short.
• ⚠️ Use the computer's USB port and the specified cable to charge the mouse.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.