Xtrfy M42 Wireless Mouse

Function Layout

The Xtrfy M42 Wireless Mouse features a detailed function layout:

• 1: Left click
• 2: Right click
• 3: Middle click
• 4: Forward
• 5: Backward
• 6: Setting
• 7: Scroll up
• 8: Scroll down
• 9: Profile
• 10: Power Off
• 11: DPI Mode
• 12: RGB Mode
• 13: PGDN Mode
• 14: Type-c connection

Instruction

Mouse Instruction:

1. Take out the wireless USB Nano receiver from the package.
2. Plug the receiver into your computer's USB port.
3. Turn on the mouse power by switching the power switch on the bottom of the mouse.
4. Wait for the computer installation to finish.

DPI Setting and Indication:

The mouse offers 6 DPI levels: 400-800-1200-1600-3200-4000-7200-19000. Press the setting button on the top of the mouse while the mode switch is in DPI mode to cycle through the DPI levels.

Polling Rate:

The polling rate can be set to 125Hz (red indicator), 500Hz (blue indicator), or 1000Hz (green indicator).

Mode Switch and Setting Function:

• The setting button functions as DPI change when the mode is set to DPI mode.
• The setting button functions as RGB setting when the mode is set to RGB mode.
• The setting button functions as PGDN when the mode is set to PGDN mode.
• Turn the mode switch to Power Off mode to switch off the mouse.

Wired and Wireless Function:

• The mouse switches automatically between wired and wireless modes. When the receiver is plugged into the computer without a cable, it operates in wireless mode.
• Connecting the cable from the computer to the mouse automatically switches it to wired mode.

Low Power and Charging Indication:

• Low Power: When the mouse battery power is low, the red LED will blink, indicating the need to charge the mouse.
• Charging: During charging, the yellow LED will blink. Once the battery is fully charged, the LED will return to its previous normal RGB effect.

Pairing:

Use the pairing tool to pair the mouse and receiver if the connection is lost or if you are using a new receiver.

About Shape Change and Weight Balance Adjustment:

• Unscrew the back cover to change the shape of the back shell.
• Remove the button from the end to change the button.
• Unscrew the battery screw located under the mouse to move the battery forward or backward, adjusting the mouse's balance.

Main Specification

Caution

1. Keep the battery dry.

2. Avoid locating the battery terminals near metallic objects.

3. Do not short-circuit the battery and avoid metallic objects or water coming into the mouse, which could cause a battery short.

4. Use a computer USB and the specified cable to charge the mouse.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.