NUX 6ixty5ive OD User Manual
Reissue Series
Safety Precautions
- Use only with the voltage indicated. Using other voltages may cause fire, electric shock, or damage.
- Do not open the back cover or case, disassemble, or modify the unit. This may cause fire, electric shock, or damage. For repairs, please contact your dealer.
- Avoid using the unit in humid environments, high-temperature locations, or places exposed to direct sunlight.
- Disconnect the unit when not in use for extended periods.
- The company is not responsible for any damages caused by fire, earthquake, acts of third parties, other accidents, or misuse, negligence, or other abnormal conditions by the customer.
- This product complies with FCC Part 15 Class B digital device limitations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
- Please keep this user manual for future reference.
- Trademarks of other companies are used solely for reference to describe the sound modeling tones. They are trademarks or registered trademarks of their respective companies and are not affiliated with NUX.
Product Description
The 6ixty5ive OD pedal delivers the punchy, clear tone of a 60s Classic Black Panel Fender amp. It produces a smooth, easy-to-handle overdrive sound with great sustain and natural compression, preserving the guitar's natural characteristics. The NUX 6ixty5ive Overdrive is inspired by the VEMURAM Jan Ray.
Overview
- Classic Fender Black Panel Overdrive Tone
- Analog Circuit with JRC4558 Gain Stage
- True-bypass Hardware Switching
Parts and Names
Diagram: A top-down view of the NUX 6ixty5ive OD pedal showing the controls and jacks.
- POWER Jack: 9V, Center negative AC adapter input. A 300mA or higher adapter is recommended. The NUX ACD-006A adapter is recommended.
- LEVEL Knob: Adjusts the output level (volume).
- GAIN Knob: Adjusts the amount of distortion.
- BASS Knob: Adjusts the bass frequencies.
- TREBLE Knob: Adjusts the treble frequencies.
- TRIM Pot: Adjusts saturation.
- INPUT Jack: Connect your guitar cable here (Input). The pedal turns ON when a plug is inserted. Disconnect the cable when not in use.
- OUTPUT Jack: Connect your amplifier cable here (Output).
- ON/OFF Switch: Engages or disengages the effect (ON/OFF).
Battery Usage
The 6ixty5ive OD can be powered by a 9V battery (006P type). Connect the battery to the snap cord and store it in the battery compartment.
When the battery level is low, the sound may change. Please replace it with a new battery.
The pedal consumes battery power when a plug is inserted into the INPUT Jack. Disconnect the plug when not in use to prevent battery drain.
Due to its relatively high power consumption, using an AC adapter is recommended.
Diagram: Illustration showing a 9V battery being inserted into the pedal's battery compartment.
Product Specifications
*Specifications are subject to change without notice.
| Input impedance: | 1M Ohms |
| Output impedance: | 10K Ohms |
| Current draw: | < 10 mA |
| Power: | 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA |
| Dimensions: | 121(L) X 77(W) X 48(D) mm |
| Weight: | 230g |
| Accessories: | User Manual (this document) |
For more information, visit: www.nuxefx.com
Made in China
