Neomounts DS15-640WH1 Instruction Manual

Product Overview

The Neomounts DS15-640WH1 is a versatile tablet desk mount designed for secure and adjustable positioning of tablets. It offers a stable base and flexible articulation for optimal viewing angles.

Key specifications:

• Model: DS15-640WH1
• Dimensions: Base diameter Ø130 mm, height approximately 296 mm.
• Articulation: Supports rotation up to 90 degrees and tilt up to +75 degrees.
• Material: Primarily metal construction.
• Measurement Unit: Millimeters (mm).

Parts Included

The following parts are included in the package:

• A (x1)
• B (x1)
• C (x1)
• D (x1)
• E (x1)
• F (x1)
• G (x1)
• H (x1)
• I (x1)
• J (x1)
• K (x4)
• L (x4)
• M (x1)
• N: M4x12 (x4)
• O: M5x6 (x4)
• P: M8x20 (x4)
• Q: M8x45 (x1)
• R (x1)
• S: 4mm (x1)
• T: 5mm (x1)

Tools required: ?️ (Tool), ड्रिल (Drill) - not included.

Step 1: Attach the support to the base

Secure the main support pole (H) to the base assembly (I, J, T) using the provided screws (P, Q).

Diagram shows the main support pole being attached to the circular base using screws and washers.

Step 2 A: Install on a wooden countertop

Attach the assembled support to a wooden countertop. This typically involves drilling pilot holes and securing the base with screws (K).

Diagram illustrates drilling pilot holes (Ø4.5mm, 55mm deep) into a wooden surface and then mounting the base using screws (K).

Step 2 B: Install on a concrete or solid brick countertop

For concrete or solid brick surfaces, drill larger pilot holes (Ø10mm, 60mm deep) and use appropriate anchors (L) along with screws (K) to secure the base.

Diagram shows drilling larger pilot holes (Ø10mm, 60mm deep) into a concrete/brick surface and then mounting the base using screws (K) and anchors (L).

Step 2 C: Install on the countertop

General instructions for installing the support on a countertop surface.

Diagram shows the general mounting process on a countertop.

Step 3: Attach the tablet holder to the mount

Connect the tablet holder (A) to the main support arm using screws (M, N). Ensure all parts are aligned correctly.

Diagram illustrates attaching the tablet holder to the mount arm with screws. It also indicates that some parts might not be included (❌ Not Included).

Step 4: Place the tablet in the holder

Remove the protective cover from the holder. Place your tablet into the holder and secure it using screws (N). Adjust the holder's claws to ensure the tablet is held firmly and the screen is visible.

Note: Remove any foam parts from the holder before installation.

Tablet Compatibility: Choose the correct panel based on your tablet model:

• Panel 1: For 9.7" iPad 5/6, iPad Air 1/2 & iPad Pro (Gen 1)
• Panel 2: For 10.2" iPad 7/8/9 & 10.5" iPad Air 3, iPad Pro (Gen 2)
• Panel 3: For 11" iPad Pro (Gen 3/4/5) & 10.9" iPad 10, iPad Air 4
• Panel 4: For 10.4" Samsung Galaxy Tab A7
• Panel 5: For 10.1" Samsung Galaxy Tab A
• Panel 6: For 10.4" Samsung Galaxy Tab S6 Lite

Diagram shows removing a cover, inserting a tablet, and securing it with screws. It also lists compatible tablet models for specific panels.

Step 5: Adjust the torque

Adjust the torque settings using the provided tool (S) to ensure the mount holds its position securely without being too stiff or too loose.

Diagram illustrates adjusting a specific screw or mechanism (S) to control the torque or tension of the mount's joints.

Step 6: Adjust the mount to the desired position

Position the tablet mount to your preferred angle and orientation for optimal viewing. The mount allows for tilt and swivel adjustments.

Diagrams show the tablet being tilted and rotated to achieve the desired viewing position.

Important Safety Precautions

Please read the following safety instructions carefully before installation and use:

1. Read this manual thoroughly before installation and follow all instructions. Keep the manual for future reference.
2. The manufacturer is not liable for damage or injury due to incorrect installation or operation not covered in this manual.
3. The mount is designed for easy installation and removal. The manufacturer is not responsible for damage or injury from human factors or natural events like earthquakes or typhoons.
4. Installation should be performed by qualified personnel only.
5. At least two people are recommended for installation or removal to prevent falling objects.
6. Inspect the installation area: Avoid high temperatures, humidity, water contact, excessive dust/fumes, slanted surfaces, shocks, or vibrations. Do not install in direct bright light.
7. Ensure adequate ventilation around the display.
8. Verify the strength and security of the mounting surface (wall, ceiling, floor). It must support at least four times the combined weight of the display and mount and withstand strong shocks.
9. Do not modify accessories or use broken parts. Contact your dealer for assistance.
10. Tighten all screws firmly but avoid excessive force to prevent damage.
11. Holes and bolts may remain in the surface after removal. Stains may appear after prolonged use.
12. The product warranty covers the mount body itself and is valid for 5 years. The manufacturer cannot control surface or installation quality.
13. Consult the English manual for any disputes regarding terms and conditions.