Neomounts FL15-750WH1 Tablet Stand

Instruction Manual

Model: FL15-750WH1

Overall Height: 1074mm

Base Dimensions: 340mm x 300mm

Parts List

A: Column (x1)
B: Support Arms (x2)
C: Base Plate (x1)
D: Top Plate (x1)
E: Support Elements (x2)
F: M6x16 Screws (x10)
G: M5x6 Screws (x4)
H: M4x12 Screws (x4)
I: 4mm Allen Key (x1)
J: Locking Mechanism Part (x1)
K: Panel (x1)
L: Panel (x1)
M: Panel (x1)
N: Panel (x1)
O: Panel (x1)
P: Panel (x1)
Q: Wall Anchors (x2)
R: Wall Screws (x2)

Tools Required: Allen Key (included), Drill (not included).

Installation Steps

Step 1: Attach the column to the base

Secure the main column to the base plate using the provided screws (F).

Diagram Description: Shows the column being attached to the base plate with screws.

Step 2: Attach the support elements to the base

Fasten the support elements to the base plate using screws (F).

Diagram Description: Shows the support elements being attached to the base plate.

Step 3: Attach the adapter plate and holder to the column

Connect the adapter plate and the tablet holder to the top of the column using screws (F), (G), and (J).

Diagram Description: Shows the adapter plate and holder assembly being attached to the column. A separate diagram shows the locking mechanism (J) and screws (G).

Step 4: Unlock the holder

Unlock the tablet holder mechanism using part (J).

Diagram Description: Shows the holder being unlocked using a key-like mechanism (J).

Step 5: Place the tablet in the holder

Remove any protective foam parts. Remove the front cover. Place the tablet into the holder. Attach the chosen panel (K-P) to the holder using screws (H). Adjust the claws to secure the tablet and ensure the screen is visible through the front panel before fully tightening the screws.

Diagram Description: Shows the tablet being placed in the holder, followed by attaching a specific panel with screws. A list of compatible tablets for each panel (1-6) is provided.

Tablet Compatibility Guide:

Panel 1: For 9.7" iPad 5/6, iPad Air 1/2 & iPad Pro (Gen 1)
Panel 2: For 10.2" iPad 7/8/9 & 10.5" iPad Air 3, iPad Pro (Gen 2)
Panel 3: For 11" iPad Pro (Gen 3/4/5) & 10.9" iPad Air 4
Panel 4: For 10.4" Samsung Galaxy Tab A7
Panel 5: For 10.1" Samsung Galaxy Tab A
Panel 6: For 10.4" Samsung Galaxy Tab S6

Step 6: Unlock the power strip compartment

Unlock the compartment designed to house a power strip.

Diagram Description: Shows the compartment lock being opened.

Step 7: Insert power strip and route cable

Place the power strip inside the compartment and route its cable.

Diagram Description: Shows a power strip being inserted into the compartment and its cable being managed.

Step 8: Lock the power strip compartment

Secure the power strip compartment.

Diagram Description: Shows the compartment lock being closed.

Step 9: Install the mount on a wooden floor

Mount the stand onto a wooden floor surface. Ensure secure fastening.

Diagram Description: Illustrates mounting the stand on a wooden floor, showing screws and anchors.

Step 10: Install the mount on a concrete/brick floor

Mount the stand onto a concrete or brick floor surface. Use appropriate anchors (Q) and screws (R) for secure installation. Recommended drill hole sizes are 4mm (5/32") and 8mm (5/16").

Diagram Description: Illustrates mounting the stand on a concrete or brick floor, showing the use of anchors and screws. Dimensions for drill holes are provided (4mm, 8mm).

Safety and Caution

General Safety Precautions:

Read this manual carefully before installation and follow all instructions. Store the manual for future reference.
The manufacturer is not legally responsible for any equipment damage or personal injury caused by incorrect installation or operation not covered in this manual.
The mount is designed for easy installation and removal. The manufacturer is not liable for damage or injury arising from human factors or acts of nature (e.g., earthquake, typhoon).
Installation by qualified personnel is recommended.
At least two persons are needed for installation or removal to avoid the hazard of falling objects.
Inspect the installation area carefully: Avoid places subject to high temperatures, humidity, water contact, excessive dust/fumes, shock, or vibration. Do not install in direct bright light areas that may cause eye fatigue.
Maintain sufficient space around the display for adequate ventilation.
Verify the wall, ceiling, or floor structure is strong enough to support at least four times the combined weight of the display and mount. The mounting location must withstand strong shocks.
Do not modify any accessories or use broken parts. Contact your dealer with any questions.
Tighten all screws securely, but do not exert excessive force to avoid breaking the screw or damaging its thread.
Holes and bolts may be left in the wall, ceiling, or floor after the display and bracket are removed. Stains may occur after extended use.
The warranty covers the mount body only. The warranty period is 5 years.
Consult the English language manual for any dispute on conditions.

Visit us at: WWW.NEOMOUNTS.COM

	Neomounts FL15-650WH1 Tablet Floor Stand - Assembly and User Guide Comprehensive guide for assembling and using the Neomounts FL15-650WH1 tablet floor stand. Includes parts list, step-by-step instructions, and tablet compatibility information.
	Neomounts DS15-640WH1 Tablet Desk Mount - Installation Guide Official instruction manual for the Neomounts DS15-640WH1 tablet desk mount. Provides step-by-step installation, parts list, safety warnings, and compatibility information for various tablets.
	Neomounts NSLS075BLACK Foldable Laptop Stand - Specifications and Overview Detailed specifications and features of the Neomounts NSLS075BLACK foldable laptop and tablet stand. Learn about its dimensions, materials, portability, and ergonomic benefits for optimal viewing comfort.
	Neomounts DS15-625BL1 Tablet Stand - Instruction Manual Comprehensive instruction manual for the Neomounts DS15-625BL1 tablet stand. Includes detailed assembly steps, parts list, and safety guidelines for secure installation and use.
	Neomounts DS15-540WH1 Tablet and Phone Stand - Installation and User Manual Official instruction manual for the Neomounts DS15-540WH1 tablet and phone stand. Learn how to safely install and use your device holder with clear steps and safety precautions.
	Neomounts FL50S-825BL1 Floor Stand Installation and User Manual Comprehensive guide for the Neomounts FL50S-825BL1 floor stand, covering product overview, key features, detailed specifications, step-by-step installation instructions, safety precautions, and maintenance tips for displays up to 75 inches.
	Neomounts DS15-050SL1 Tablet Stand - Instruction Manual Official instruction manual for the Neomounts by Newstar DS15-050SL1 tablet stand. Includes safety guidelines, parts list, and assembly instructions.
	Neomounts NS-M3800BLACK Mobile Floor Stand Instruction Manual This comprehensive instruction manual guides users through the assembly and installation of the Neomounts NS-M3800BLACK mobile floor stand. It includes a detailed parts list, step-by-step assembly instructions with textual descriptions of diagrams, safety precautions, and product specifications such as weight capacity, VESA compatibility, and dimensions. Suitable for various displays and monitors, this stand is designed for ease of use and secure mounting.