XBA-TEY12 Bill Acceptor Option Switch Settings and Configuration

International Currency Technologies Corporation

Supported Currencies

Supported bill: Lira 5, 10, 20, 50, 100, 200 (6 bills)

EUR 5, 10, 20, 50, 100, 200 (6 bills)

Option Switch Settings (Lira/EUR)

FUNCTION	SW1	SW2	SW3	SW4	SW5	SW6	SW7	SW8
Reject Lira 5 & 10 & 20	ON
Accept Lira 5 & 10 & 20		OFF
Reject Lira 50 & 100 & 200			ON
Accept Lira 50 & 100 & 200				OFF
Reject € 5 & 10					ON
Accept € 5 & 10						OFF
Reject € 20 & 50							ON
Accept € 20 & 50								OFF
Reject € 100(2019) & 200(2019)								ON
Accept € 100(2019) & 200(2019)								OFF
Disable Bill Reject 4 Times BA Stop By 30 Sec							ON
Enable Bill Reject 4 Times BA Stop By 30 Sec								OFF
Stack Banknote when Power-up						ON
Reject Banknote when Power-up							OFF
Reserved								ON
Reserved								OFF

Option Switch Settings (Pulse/MDB/ICT104U/ICT104V)

General Functions

FUNCTION	SW1	SW2	SW3	SW4	SW5	SW6	SW7	SW8
Inhibit Active HIGH	ON
Inhibit Active LOW		OFF
Reserved			ON
Reserved				OFF
Reserved					ON
Reserved						OFF
Reserved							ON
Reserved								OFF

Pulse Mode & Credit-Pulse Settings

Configuration	MDB Mode	ICT104V Mode
Pulse Mode
★Credit-Pulse Normal HIGH	Scaling Factor (SF) = 10	Scaling Factor (SF) = 1
Credit-Pulse Normal LOW	Decimal Point Position (DPP) = 1 Connect with coin changer	Decimal Point Position (DPP) = 0 Connect with ICT JPSTD converter board

Pulse Configurations (Lira 5)

Pulse Count	MDB Mode	ICT104U Mode	ICT104V Mode
1 pulse / Lira 5
5 pulses / Lira 5	ON	OFF	OFF
25 pulses / Lira 5	OFF	ON	ON

Note:

Please reset the bill acceptor after setting the dip switch.
Dip switches 1 to 5 are only used for pulse protocol.
Calibration card is needed.
The transaction Record can be saved by USB MSD (only for EX series).
EUR $5 display TRY 30 (Only for Pulse, MDB)
EUR $10 display TRY 60 (Only for Pulse, MDB)
EUR $20 display TRY 120 (Only for Pulse, MDB)
EUR $50 display TRY 300 (Only for Pulse, MDB)
EUR $100 display TRY 600 (Only for Pulse, MDB)
EUR $200 display TRY 1200 (Only for Pulse, MDB)

DIP Switch Location and Interface

This dip switch is located on the CPU board, remove the CPU board cover first.

A diagram shows the DIP switch located on the CPU board, indicating that the CPU board cover must be removed first.

An illustration displays the interface components, including an LED indicator, a DIP switch labeled 'DIP Switch', and an 'Interface' connection point.

Appendix: Currency Assign Data

Bill valuerace	ICT104U	ICT104V	Pulse	MDB
BV1 Lira 5	Lira 5	Lira 5	Lira 5	Lira 5
BV2 Lira 10	Lira 10	Lira 10	Lira 10	Lira 10
BV3 Lira 20	Lira 20	Lira 20	Lira 20	Lira 20
BV4 Lira 50	Lira 50	Lira 50	Lira 50	Lira 50
BV5 Lira 100	Lira 100	Lira 100	Lira 100	Lira 100
BV6 Lira 200	Lira 200	Lira 200	Lira 200	Lira 200
BV7 Euro 5	Euro 5	Euro 5	Euro 5	Euro 5
BV8 Euro 10	Euro 10	Euro 10	Euro 10	Euro 10
BV9 Euro 20	Euro 20	Euro 20	Euro 20	Euro 20
BV10 Euro 50	Euro 50	Euro 50	Euro 50	Euro 50
BV11 Euro 100	Euro 100	Euro 100	Euro 100	Euro 100
BV12 Euro 200	Euro 200	Euro 200	Euro 200	Euro 200

	XBA-USD6 Option Switch Settings and Currency Configuration Guide Detailed guide to XBA-USD6 option switch settings, including pulse, MDB, ICT002U, ICT104U, and ICT104V modes, along with currency assignment data for various bill denominations.
	XBA-RUB6 Bill Acceptor: Option Switch Settings and Configuration Guide to XBA-RUB6 bill acceptor option switch settings for Pulse, MDB, ICT104U, and ICT104V interfaces, including currency assignment data by International Currency Technologies Corporation.
	XBA-KZT6 Bill Acceptor Option Switch Settings and Currency Assignment Detailed configuration guide for the XBA-KZT6 bill acceptor, covering option switch settings for Pulse, MDB, ICT104U, and ICT104V interfaces, along with currency assignment data.
	XBA-TRY6 Bill Acceptor: Switch Settings and Protocol Configuration International Currency Technologies Corporation's XBA-TRY6 bill acceptor guide details switch settings for Pulse, MDB, ccNet, ICT104V modes. Learn currency assignment for Lira denominations and device configuration.
	XBA-TWD4 Bill Acceptor Option Switch Settings and Configuration Guide Comprehensive guide detailing the XBA-TWD4 bill acceptor's DIP switch settings for various operating modes including Pulse, MDB, ICT104U, and ICT104V. Includes currency assignment data and configuration notes.
	XBA-NZD5 Bill Acceptor: Option Switch Settings and Currency Assignment Guide Comprehensive guide detailing the XBA-NZD5 bill acceptor's option switch configurations for various modes including Pulse, MDB, and ICT104V. Features currency assignment data for New Zealand Dollars (NZD) and switch location information.
	XBA-KHR8 Bill Acceptor DIP Switch Settings and Configuration Guide Detailed guide to configuring the XBA-KHR8 bill acceptor series from International Currency Technologies Corporation, covering DIP switch settings for Pulse, MDB, ICT002U, ICT104U, and ICT104V interfaces, along with currency assignment data.
	XBA-TRY6 Bill Acceptor Configuration Guide Details the DIP switch settings for the XBA-TRY6 bill acceptor, covering Pulse, MDB, ICT104U, and ICT104V modes, along with supported bill denominations and operational functions.