Sideboard Assembly Instructions

Please read this entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.

Important Information & Safety Warnings

• AVOID SCRATCHES: Assemble this furniture on a soft surface, such as a rug, to prevent scratches.
• IMPROVE EFFICIENCY: Consider finding a partner to assist with assembly to speed up the process.
• ANTI-TOPPLE WARNING: To prevent serious or fatal crush injuries from overturned furniture, use the provided wall attachment hardware. If not included, purchase appropriate wall anchors for your wall type. Seek professional advice if unsure. Follow all steps carefully.
• MAINTENANCE: Re-tighten all screws two weeks after assembly and every three months thereafter to ensure stability.
• CLEANING: For the frame, use a rag dipped in neutral detergent, then dry with a clean rag. For glass, use a glass cleaner and dry with a dry rag.
• CAUTION: Do not use an electric screwdriver. Do not apply excessive force during installation as the boards can break easily.

Tools Required

• Tape Measure
• Pencil
• Level
• Hammer
• Phillips Head Screwdriver
• Flat Head Screwdriver
• Drill

Parts List

Assembly Steps

Step 1: Prepare Panels

Identify panels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13. Ensure all parts are present and undamaged.

Step 2: Assemble Frame Base

Attach side panels (2, 3) to the base panel (5) using screws (B), dowels (N), and cam locks (Q). Insert cam locks (N) into the designated holes and tighten to secure panels.

Step 3: Attach Side Supports

Connect the side support pieces (part of 2 and 3) using screws (B).

Step 4: Attach Back Support

Secure the back support piece (6) to the base panel (5) using screws (G).

Step 5: Attach Vertical Dividers

Insert dowels (A) and cam locks (F) into the base panel (5) and the corresponding holes on the vertical divider panels (4). Attach the vertical divider (4) to the base panel (5) and secure with cam locks (A).

Step 6: Attach Side Panels to Base

Attach the side panels (2, 3) to the base panel (5) using dowels (F) and cam locks (A). Ensure the panels are flush and secure.

Step 7: Connect Side Panels to Vertical Divider

Attach the side panels (3) to the vertical divider panel (4) using dowels (A) and cam locks (F).

Step 8: Continue Frame Assembly

Continue attaching side panels (2) and vertical dividers (4) to the base panel (5) using dowels (A) and cam locks (F).

Step 9: Attach Top Panel

Insert dowels (A) and cam locks (F) into the top edges of the side panels (2, 3) and vertical dividers (4). Place the top panel (1) onto the assembled frame and secure with cam locks (A).

Step 10: Install Back Panels

Slide the back panels (10, 11) into the grooves on the back of the unit. Secure them using screws (H) and (E).

Step 11: Install Shelves

Insert shelf supports (M) into the pre-drilled holes on the inside of the cabinet. Place the shelves (7) onto the supports.

Step 12: Attach Doors

Attach hinges to the doors (8, 9) using screws (E). Mount the doors onto the cabinet frame by attaching the hinges to the pre-drilled holes on the side panels.

Step 13: Secure Doors

Use screws (E) to secure the doors (8) to the cabinet frame.

Step 14: Attach Remaining Doors

Use screws (E) to secure the remaining doors (9) to the cabinet frame.

Step 15: Wall Anchoring

IMPORTANT: To prevent tipping, secure the sideboard to the wall using the provided anti-topple hardware (O, P). Drill holes in the wall at the appropriate height, insert wall anchors if necessary, and attach the bracket (Q) to the wall and the sideboard using screws (P) and (O).

Warranty Information

Warranty Claims

• A 30-day warranty is provided for furniture with broken parts or functional issues, starting from the date of purchase, verified by proof of purchase.
• Contact customer service with your order number and problem details for replacement parts. Replacements will be arranged within 48 hours. If a part is out of stock, you will be notified of the shipping date.
• The product must be used according to the provided instructions.
• For returns due to reasons other than defects, the furniture must be cleaned and dried within 30 days of receipt.

Type of Warranty Claim

• Failure to follow assembly instructions will void the warranty.
• Damage during installation is not covered, but damage during transportation is covered.

Scope of Responsibility

• The manufacturer is not responsible for misuse, user-inflicted damage, or loss of parts during installation.
• Damage and scratches occurring after use are not covered by the warranty.

Warranty Coverage (US Purchases)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns

Changed Your Mind?

If you have changed your mind, please follow the retailer's return instructions.

Defective Items

If an item is defective, first consult the FAQ section at feedbackstation@163.com for potential solutions. If the issue persists, contact customer support.

Damaged Items

• If your order has obvious shipping damage, refuse the delivery.
• If delivery is accepted and shipping damage is discovered, follow the retailer's specific instructions.
• Always save all packaging material and paperwork when returning items. Failure to do so may jeopardize your claim and credit.