Kwikset
Kwikset SmartCode™ Deadbolt featuring Z-Wave®
DATA SHEET
Model & Function
Model: Kwikset 910 SmartCode™ Deadbolt w/Home Connect™ Technology - Z-Wave®
Function: Single Cylinder Electronic Deadbolt
Wireless Communications
Technology: Z-Wave® Wireless Technology
RF Operation: 908.42 MHz (US)
Range: Typical 65ft Line of Sight
Convenience
- Backlit Keypad w/One-Touch Locking
- Motorized Locking Mechanism enables true remote locking & unlocking
- Tapered deadbolt design permits misaligned doors to lock & unlock with ease
- SmartKey® Easy Re-key Backup Keyway
- Interior LED Status Indicator: Locked/Unlocked Status and Low Battery Status
- Auto re-lock feature: locks door 30-seconds after unlocking
Security
- 30 User Access Code capacity, 4 to 8 digit code length
- 128-Bit Advanced Encryption Standard (AES) Communication
- Incorrect Code Protection with Audible Alarm
- Audit Trail Logging stores access history in the lock memory
- Date/Time Scheduled User Access Control
- Meets BHMA Grade 2 Deadbolt Operational and Security Standards
- Drill & Pick resistant backup keyway w/BumpGuard™™™ protection
Customizable Features
- Auto re-lock 30-seconds after unlocking - ON/OFF
- Interior LED Locked/Unlocked Status - ON/OFF
- Audible Feedback - ON/OFF
Installation and Application
- Easy Installation: replaces existing deadbolt with just a screwdriver
- Battery Operated device, with approximately 1 Year battery life
- Fits all standard residential door preparations
Specifications
Electrical
| Input Power | 6V (4xAA Alkaline Batteries) |
Mechanical
| Door Prep | Standard 2 1/8" to 1.5" bore dia. |
| Backset | Adjustable 2 3/8" or 2 3/4" |
| Door Thickness | 1 3/8" to 2" automatic adjustment |
| Cylinder | Smartkey® Keyway |
| Faceplate | Standard round corner 1" x 2 1/4" |
| Strike | Standard round strike 2 3/4" x 1 1/8" |
| Bolt | 1" throw steel deadbolt, w/security pin |
| Door Handing | Reversible |
Environmental
| Temperature Range | Exterior: -40 to +80°C Interior: 0 to +60°C |
| Humidity | Exterior: 100% condensing Interior: 100% non-condensing |
Z-Wave® Protocol Supported Command Classes
- COMMAND_CLASS_MANUFACTURER_SPECIFIC
- COMMAND_CLASS_VERSION
- COMMAND_CLASS_SECURITY
- COMMAND_CLASS_BATTERY
- COMMAND_CLASS_ASSOCIATION
- COMMAND_CLASS_CONFIGURATION
- COMMAND_CLASS_PROTECTION
- COMMAND_CLASS_DOOR_LOCK
- COMMAND_CLASS_USER_CODE
- COMMAND_CLASS_SCHEDULE_ENTRY_LOCK
- COMMAND_CLASS_DOOR_LOCK_LOGGING
- COMMAND_CLASS_ALARM
- COMMAND_CLASS_TIME_PARAMETERS
- COMMAND_CLASS_BASIC
Note: Control system must support Z-Wave® Secure Commands for proper lock operation.
Lock Initiated Event Notifications
- Lock Secured using Keyed cylinder or inside turn-piece
- Lock Un-Secured using Keyed cylinder or inside turn-piece
- Lock Auto Secured - Bolt Jammed (Not fully extended)
- Lock Auto Secured - Successful (Fully extended)
- Lock Secured at Keypad - Bolt Jammed (Not fully extended)
- Lock Secured at Keypad - Successful (Fully extended)
- Lock Un-Secured by User (User-ID) at Keypad
- Lock Secured by User (User-ID) at Keypad
- Lock Secured by Controller - Bolt Jammed (Not fully extended)
- Lock Secured by Controller - Successful (Fully extended)
- Lock Un-Secured by Controller - Successful (Fully retracted)
- New User Code (User-ID#) added to the lock
- All User Codes deleted from lock
- Failed User Code attempt at Keypad
- Attempted access by user (User-ID#) outside of scheduled date/time
- Low battery level
- Critical battery level
- Battery level too low to operate deadbolt
