TÅGARP Floor Uplighter
Brand: IKEA
Product Information & Safety
For indoor use only.
Safety Warning: If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.
Parts Identification
The following parts are included for assembly:
- Lamp head assembly with power cord (1x)
- Pole sections (5x)
- Base (1x)
- Securing clips for cord (2x)
Initial assembly illustration description: The document begins with an illustration showing a person contemplating furniture assembly with a question mark, followed by a visual of a person at an IKEA store, indicating the product's origin and purpose.
Assembly Instructions
Step 1: Attach the first pole section to the base. Screw the threaded end of the pole into the corresponding fitting on the base. [screw clockwise]
Step 2: Connect the next pole section. Screw the threaded end of the second pole section onto the top of the first pole section. [screw clockwise]
Step 3: Continue adding pole sections. Screw the third pole section onto the second. [screw clockwise]
Step 4: Continue adding pole sections. Screw the fourth pole section onto the third. [screw clockwise]
Step 5: Complete the pole assembly. Screw the fifth pole section onto the fourth. [screw clockwise]
Step 6: Attach the lamp head. Screw the lamp head assembly onto the top of the assembled pole. [screw clockwise]
Step 7: Secure the power cord. Use the two provided clips to fasten the power cord neatly along the pole. [clip cord]
Step 8: Attach the lampshade. Place the lampshade onto the lamp head assembly and press gently until it clicks into place. [press to secure]
Step 9: Install a light bulb. Screw a suitable light bulb into the socket inside the lampshade. [screw bulb]
