TÅGARP Floor Uplighter

Important Safety Information & Usage

For indoor use only.

If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.

Assembly Instructions

Parts Included

• 1x Base
• 5x Pole Sections
• 1x Lamp Head Assembly (includes shade and socket)
• 1x Power Cord with Switch
• 2x Cable Clips

Assembly Steps

1. Step 1: Attach the first pole section to the base. Screw it in securely.
2. Step 2: Screw the second pole section onto the first.
3. Step 3: Screw the third pole section onto the second.
4. Step 4: Screw the fourth pole section onto the third.
5. Step 5: Screw the fifth pole section onto the fourth.
6. Step 6: Carefully thread the power cord through the assembled pole sections, starting from the top and guiding it down towards the base.
7. Step 7: Use the two provided cable clips to neatly secure the power cord along the pole.
8. Step 8: Attach the lamp head assembly to the top of the pole. It should click into place.
9. Step 9: Install a suitable light bulb (not included).