HEKTOGRAM Floor Uplighter
Assembly Instructions
Safety Information
⚠️ For indoor use only.
If the external flexible cable or cord of this luminaire is damaged, it must be replaced by the manufacturer, their service agent, or a similarly qualified person to prevent hazards. If you are uncertain, please contact IKEA.
Assembly Steps
-
Assemble Pole Sections: Connect the pole sections by screwing them together. The diagrams show extending the pole and threading each section into the one below it.
-
Attach Base: Screw the assembled pole into the circular base.
-
Prepare Lamp Holder: Unscrew the retaining ring from the lamp holder socket.
-
Attach Lampshade: Place the lampshade over the lamp holder assembly.
-
Install Light Bulb: Screw the light bulb into the lamp holder.
-
Final Check: ℹ️ The diagram shows a light bulb illuminating, indicating the lamp is ready for use.