Progress Lighting P500446 1-LT Medium Pendant
Model Number: P500446
Package Contents
| Part |
Description |
Quantity |
| A |
Fixture |
1 |
| B |
Glass Shade |
1 |
| C |
Socket Cover |
1 |
| D |
Socket Ring |
1 |
| E |
Canopy |
1 |
Diagram Description: An illustration shows the main components labeled A through E, depicting the fixture body, glass shade, socket cover, socket ring, and canopy.
Hardware Contents (not actual size)
| Identifier |
Description |
Quantity |
| AA |
Screw (#8-32) |
2 |
| BB |
Wire Nut |
3 |
| CC |
Round Mounting Plate |
1 |
| DD |
Hex Nut (#8-32) |
2 |
| EE |
Cylinder Nut (#8-32) |
2 |
| FF |
12" Pipe (1/8IP) |
4 |
| GG |
6" Pipe (1/8IP) |
1 |
| HH |
Nipple (1/8IP) |
4 |
Diagram Description: Illustrations show various hardware pieces including screws, wire nuts, a mounting plate, nuts, pipes of different lengths, and a nipple. Each is labeled with a letter identifier and quantity.
Support
Thank you for selecting Progress Lighting.
For questions regarding product information, assembly, or missing parts, please contact:
Phone: 800-447-0573 (8am-8pm Eastern, Monday-Friday)
Email: customerservice@progresslighting.com
Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
CAUTION: Read instructions carefully and turn electricity off at the main circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Use min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install, or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with a damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
Step 1
Loosely thread the screws (AA) and the hex nuts (DD) onto the round mounting plate (CC) as shown. Adjust the screw length according to the fixture canopy depth.
Diagram Description: The round mounting plate (CC) is shown with screws (AA) and hex nuts (DD) attached. Arrows indicate the ability to slide the screws in or out for adjustment.
Attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
Lift up the fixture and pass the screws (AA) through the two mounting holes in the fixture canopy. While holding the fixture, thread the screws (AA) in or out of the round mounting plate (CC) until 3/16" [5mm] of threads are showing. This length is sufficient for mounting.
Next, take the fixture down and tighten the hex nuts (DD) up against the round mounting plate (CC) to secure the adjusted screw length.
Diagram Description: An illustration shows the fixture assembly being attached to an electrical box. An inset diagram contrasts an "INCORRECT" method with a "CORRECT" method for adjusting screw length, showing approximately 3/16" [5mm] of thread exposed for proper mounting.
Step 3
Note: Determine the hanging length of your fixture by removing pipes and optionally cutting electrical and ground wires to length. Do NOT cut electrical or ground wires until the overall length is determined. Leave at least 6 inches (minimum) of wire past the canopy to allow for easy connections.
Pass the wires through the pipes (GG/FF) and nipples (HH) to achieve the desired length, tightening stems as you go to avoid twisting wires. Secure tightly. Pass wires through the canopy (E). Secure the canopy (E) tightly to the pipes (FF).
Diagram Description: An illustration shows multiple pipes (FF, GG, HH) being connected together to form a stem. Electrical wires are shown being fed through these pipes. The canopy (E) is shown being attached to the top of the assembled pipes.
Step 4
Strip 3/8" of insulation from the electrical wire ends.
Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box. Connect the BLACK fixture wire to the BLACK supply wire from the outlet box.
Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all wire connections carefully into the outlet box.
Diagram Description: An illustration shows the wiring connections being made inside an electrical box. Wire nuts (BB) are used to connect white-to-white, black-to-black, and ground wires. The ground wire is shown connected to the round mounting plate.
Step 5
Pass the screws (AA) through the two holes in the canopy (E). Secure the fixture to the screws (AA) using the two cylinder nuts (EE) provided. Tighten securely in place.
Diagram Description: An illustration shows the canopy (E) being secured to the mounting screws (AA) using cylinder nuts (EE).
Step 6
Attach the glass shade (B) to the fixture (A) using the socket cover (C) and socket ring (D) to secure it tightly.
Thread the lamp (not included) into the fixture socket. Use a 60-watt MAX incandescent medium base lamp, SBCFL, or SBLED.
Diagram Description: An illustration shows the glass shade (B) being attached to the fixture body (A). The socket cover (C) and socket ring (D) are used to secure the shade. A light bulb is shown being screwed into the socket.
Warranty and Exclusive Remedy
Progress products, when properly installed and under normal conditions of use, are warranted to be free from defects in material and workmanship at time of shipment. All warranty claims must be asserted within one year from date of purchase of the subject items; thereafter, warranty claims will not be honored. Customers' sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at time of shipment. Progress's sole and maximum liability for a defective product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer's sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers. Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain customer's responsibility. Customer is responsible for determining the suitability of our products for customer's use or resale, or for incorporating them into objects or for applications which customer designs, assembles, constructs or manufactures.
Models: P500446 1 LT Medium Pendant, P500446, 1 LT Medium Pendant, Medium Pendant, Pendant
