Manuals+

WaterCop Classic Outdoor Wiring Guide

Wiring Instructions

  1. REMOVE THE FRONT COVER FROM INDOOR CONTROL UNIT. (4 SCREWS)
  2. INSERT THE OUTDOOR CABLE THROUGH THE CABLE FITTING ON SIDE OF THE CONTROL UNIT.
  3. PLUG THE WIRE LEADS FROM THE CABLE INTO THE INTERNAL WIRE HARNESS LEADS.
  4. REINSTALL THE COVER USING THE 4 SCREWS. TIGHTEN THE CABLE FITTING TO SECURE THE OUTDOOR CABLE.
  5. REFER TO OWNER'S MANUAL FOR INSTALLATION AND OPERATION.

Diagram

The diagram illustrates the connection between the Indoor Control Unit and the Outdoor Actuator.

Indoor Control Unit: This unit has a cable fitting on its side where the outdoor cable is inserted.

Outdoor Cable: This cable connects the Indoor Control Unit to the Outdoor Actuator. It has wire leads that connect to the internal wire harness.

Cable Fitting: A component on the Indoor Control Unit used to secure the outdoor cable.

Outdoor Actuator: This unit is connected to the outdoor cable and controls the water flow. It is labeled as an "AUXILIARY ACTUATOR".

The wiring involves connecting the red wire to red, blue to blue, and black to black.

Document Revision: 192513 REV. D

Models: 192513, 192513 Classic Indoor Outdoor Wiring, 192513, Classic Indoor Outdoor Wiring, Outdoor Wiring, Wiring

PDF preview unavailable. Download the PDF instead.

192513-Classic-Outdoor-to-Indoor-Wiring-Rev-D Acrobat Distiller 25.0 (Windows)

Related Documents

Preview WaterCop Classic PVC Wiring Guide for 12 VDC Systems
This guide provides PVC wiring instructions for the WaterCop Classic 12 VDC system, detailing connection procedures and important cautions for installation.
Preview WaterCop Classic Outdoor Actuator Specifications and Dimensions
Technical specifications and dimensional drawings for the WaterCop Classic Outdoor Auxiliary Actuator, including valve sizes, flow rates, and model numbers.
Preview WaterCop DC Pro Large Valve Outdoor Ordering Guide
Ordering guide for WaterCop DC Pro Large Valve Outdoor systems, specifying components for 1 1/2" and 2" main water lines, including actuators, control panels, and connect cables.
Preview WaterCop Pro System Wiring Diagram for Dual Control Actuators
A detailed wiring diagram for the WaterCop Pro System with Dual Control Actuators, outlining connections for primary and secondary actuators, power supply, and remote valve.
Preview WaterCop Classic Large Valve Ordering Guide
This guide provides instructions for ordering WaterCop Classic Large Valves, including system selection, sensor needs, and part numbers for 1 1/2" and 2" main water lines.
Preview WaterCop Non-Motorized Control Unit (WCDNM) Dimensional Drawing
Dimensional drawing for the WaterCop Non-Motorized Control Unit (WCDNM) by DynaQuip Controls Corporation, detailing its dimensions, cable lengths, and sensor probe connections.
Preview WaterCop Classic HW Actuator with Hard Wired Sensor - Dimensional Data
Technical specifications and dimensional data for the WaterCop Classic HW Actuator with Hard Wired Sensor, including valve sizes, flow rates, and NSF/ANSI 372 certification.
Preview WaterCop Classic Dual Actuator and HW Sensor Dimensional Drawing
This document provides dimensional specifications and certifications for the WaterCop Classic Dual Actuator and Hardwired (HW) Sensor system, designed for potable water applications.