Hagor CPS Pole 2250 mm for Multiscreen Installation
Art.-Nr.: 3216
Important Safety Information
Caution! Technical devices are of considerable value. Handle components carefully during installation and protect them if necessary. Secure the installation area if required, as falling parts can cause injuries and material damage. The included materials may not be suitable for all installation site conditions; check and replace them with appropriate materials if necessary. If unsure about the installation or have questions, contact Hagor Products GmbH or other trained specialists.
Scope of Delivery
The following parts are included:
- A (x1): Pole component
- B (x1): Mounting bracket
- C (x2): Caps
- D M8x80 (x3): Screws
- E M8x12 (x2): Screws
- F (x3): Fasteners
A diagram shows the pole component (A), the mounting bracket (B), and the caps (C), along with screws (D, E) and fasteners (F).
Installation Steps
The installation involves attaching the mounting bracket (B) to the pole component (A) using screws (D) and fasteners (F). The diagram indicates specific screw points and orientations. The pole can be adjusted for screen mounting at different heights, with indicated distances of 80 mm, 80-110 mm, and 110 mm.
A second diagram illustrates the assembly process in more detail, showing the connection of components B and C to A using screws D and E, with a 5 mm clearance indicated.
Dimensions
The pole has a total height of 2254 mm. The top section has a width of 315 mm and a diameter of 60 mm. The lower section of the pole also has a diameter of 60 mm.
A diagram illustrates these dimensions:
- Total height: 2254 mm
- Top width: 315 mm
- Diameter: 60 mm
