Beldray Flat Mop and Bucket User Manual

Important Safety Information

⚠️ CAUTION: Do not fill the bucket with hot or boiling water. Use only on cool surfaces. Keep out of the reach of children. Not suitable for use with bleach.

Please retain instructions for future reference.

Before First Use

1. Remove all packaging from the components.
2. Separate the mop head from the bucket and all poles.
3. Check that the bucket is in operational condition before use.
4. Fill the clean water compartment (9) approximately three quarters full with a solution of water and detergent or disinfectant.

Care and Maintenance

1. Drain any remaining water from the bucket and clean it after every use.
2. Wipe the main body with a soft, damp cloth and allow to dry thoroughly.
3. The mop pads are machine washable on a low heat setting. Use a mild detergent and lay them flat to dry.
4. Never use bleach or fabric softener when washing the mop pads.
5. Store in a cool, dry place.

Using the Mop and Bucket Set

1. Screw the pole with handle into the end of one of the poles (3 & 4).
2. Position one of the poles inside the other and twist in a clockwise direction until secure.
3. Push the free end of the combined poles into the top of the flat mop head (6) until the latch clicks into place.
4. Press the pad release button (8) to release the hook-and-loop fasteners.
5. Align the mop pad so that it attaches securely to the three hooks at the top of the flat mop head. See diagrams.
6. Press down firmly to attach the mop pad using the built-in hook-and-loop fasteners.
7. Fill the inner bucket (9) with warm water. Use only the recommended amount of detergent or disinfectant, according to manufacturer's instructions.
8. Plunge the mop head into the wash section of the bucket to wet and clean the pad. Then use the dry side of the bucket to remove excess water.
9. To clean the mop head, detach the mop pad from the flat mop head and follow the instructions in the section on the care label.
10. To remove the excess water from the bucket, release the plug.

Description of Parts

• 1. Hands-free wringing system
• 2. Bucket
• 3. Pole with handle
• 4. Detachable pole (qty. 3)
• 5. Mop pad (qty. 2)
• 6. Flat head mop
• 7. Plug
• 8. Pad release button
• 9. Clean water compartment

Diagram Descriptions

Fig. 1: Illustrates the main components of the mop and bucket set, showing the bucket, poles (including the one with the handle), the mop head, and the mop pad. Numbers indicate specific parts.

Fig. 2: Shows a close-up view of the flat mop head with a mop pad attached. It highlights the hook-and-loop fasteners and the pad release button (8) used to detach the pad.

Manufacturer Information

Manufactured by: Ultimate Products UK Ltd., Victoria Street, Manchester OL9 0DD. UK. Ultimate Products Europe Ltd., 19 Baggot Street Lower, Dublin D02 X658. ROI.

Beldray trademark. All rights reserved.

Product Code: CD240625/MD000000/V1