JLab JBuddies Studio Wireless Headphones
User Manual and Guide
Welcome
We are pleased you chose JLab Audio. We stand behind our products.
Your satisfaction is guaranteed. You may exchange or return merchandise within 14 days of purchase. Return the product to the store where it was purchased. If you opened or used the product, restrictions may apply.
Contact Us:
For support: support@jlabaudio.com
Visit our international site: intl.jlabaudio.com/contact
Register Today:
Get product updates, tips, FAQs, and more at intl.jlabaudio.com/register.
Product Name: JLab JBuddies Studio Wireless Headphones
Initial Setup: Bluetooth Pairing
-
Step 1: Enable Bluetooth
On your device's settings, turn on Bluetooth.
-
Step 2: Initiate Pairing Mode
With the JLab JBuddies Studio Wireless headphones turned OFF, press and hold the power button [?] for approximately 10 seconds. A rapid flashing red and blue light indicates the headphones are searching for a Bluetooth device.
-
Step 3: Connect to Device
On your device's Bluetooth settings, select "JLab JBuddies Studio BT". Once paired, the headphones will emit two beeps, and the blue indicator light will flash slowly.
[Visual Description: A smartphone screen showing Bluetooth settings with "JLab JBuddies Studio BT" selected for connection.]
Notes on Bluetooth
- Bluetooth is a wireless communication technology sensitive to objects that obstruct the signal between the headphones and the connected device. The headphones are designed for use within 10 meters (33 feet) of the connected device, provided there are no significant obstructions like walls.
- Once successfully connected, the headphones will remember your device settings. Future pairing with the same device will be automatic. Only one device can be connected at a time. To pair with a different device, first unpair the current device via its Bluetooth settings.
- If the Bluetooth connection is lost for any reason, manually reconnect your Bluetooth device.
Charging
Connect a micro-USB cable to a computer or a USB port (5V 1A or less) to charge the headphones.
[Visual Description: Indicator lights showing charging status: plugged in, charging, and fully charged.]
Controls
- Bluetooth Pairing: Follow the initial setup steps.
- Power On/Off: Press and hold for 3 seconds. A slow blue light indicates the headphones are powered on. [?]
- Play/Pause / Answer Call / Disconnect: Single press. [▶️/⏸️]
- Volume Up/Down: Single press. [➕]/[➖]
- Track Forward / Track Backward: Press and hold for 2 seconds.
- Activate Siri (iOS) or OK Google (Android): Double press. [?️]
- Re-pairing and Pairing Additional Devices: With the headphones OFF, press and hold the power button for 10 seconds.
[Visual Description: Diagrams illustrating the location and function of each button: Power/Bluetooth, Volume Up, Volume Down, AUX Input/Output, Charging Port.]
Sharing Mode
To use sharing mode, connect one side of the included AUX cable to another pair of JLab JBuddies Studio headphones or any other wired headphones/earbuds. [?]
[Visual Description: Diagram showing two pairs of headphones connected via an AUX cable, enabling audio sharing.]
Wired Mode
Connect the included AUX cable to your device to use the headphones as wired headphones. [?]
[Visual Description: Diagram showing headphones connected to a device (like a tablet or phone) using an AUX cable.]
Important Notes
- Avoid exposing the headphones to moisture or liquids. ⚠️
- Avoid extreme heat, cold, and humidity. ⚠️
- Do not drop, crush, pull the cable forcefully, or bend the cable over sharp surfaces.
- Earwax buildup may occur on the ear tips, potentially reducing sound quality. Gently clean earwax with a cotton swab or a small brush to improve sound quality. ✔️
- If you experience discomfort or pain, try lowering the volume or temporarily stop using the headphones.
- If you experience persistent discomfort while using the product, discontinue use and consult a doctor.
- We recommend treating your headphones with care, similar to expensive sunglasses, and storing them in a safe place when not in use.
Resources
Download the JLab Audio + Burn-in Tool from the App Store or Google Play.
Visit us online: INTL.JLABAUDIO.COM
