Pyle PLDAND110 Android Stereo Receiver & DVR Dash Cam System Kit

Introduction

This unit is based on the Android 4.4.4 platform. In addition to the standard Apps provided, you can download and install thousands of other Apps. Please note that not all Apps are compatible with this platform. For any compatibility issues with a 3rd party App, please contact the App provider. For operation instructions of a 3rd party App, please also contact the App provider. Pyle is not responsible for any problems arising from your use of 3rd party Apps.

To fully enjoy the unit's features and ensure proper and safe operation, please read this manual thoroughly before use. Pay close attention to all system warnings and precautions. Keep this manual in a safe place for future reference. For service, repair, or technical support, contact your dealer or the nearest authorized repair center.

Contents

Note: Pyle Audio is committed to improving customer experience and receiver features. Specifications are subject to change. System descriptions and features reflect the current production period. Pyle reserves the right to change terms, specifications, features, and descriptions at any time.

Compatibility

This unit is a standard "Double Din" sized radio. Verify that your vehicle accepts a double DIN sized radio. This unit conforms to standard double DIN size and dimensions. Your vehicle may require a vehicle-specific or 3rd party double DIN installation kit.

Precautions & Warnings

Please read this booklet and heed all precautions for a positive user experience. For your safety, do not operate the head unit's controls while driving. Ensure the volume is set to a level where external sounds are still audible.

Do not watch the monitor or attempt to operate multi-media features while driving. If the parking brake is not engaged, video playback will be disabled for your safety.

Cleaning

Clean the LCD with a slightly damp cloth. Keep the screen clean and free of debris. Do not use solvents such as alcohol, benzene, thinner, commercial cleaners, or anti-static spray. Avoid scratching the screen surface when wiping.

Temperature

In cold weather, check for condensation on the disc. If found, wipe the moisture and do not operate the player for an hour until condensation disappears from the optical reader.

System Handling

The screen may not be clear in extreme cold or hot temperatures; it will return to normal as the car's temperature stabilizes. Never touch the screen with anything other than your finger(s). Direct sunlight and glare can cause the unit to overheat, potentially damaging the LCD. Avoid exposing the display to excessive sunlight.

Note: Driving on rough terrain may cause the disc to skip during playback.

In case of malfunction, do not open the unit or lubricate parts. Contact Sound Around USA for repair information. If liquid or foreign substances enter the unit, turn off the power immediately and consult your dealer or an authorized repair center. If you notice smoke, irregular noises, or smells, power off immediately and consult your dealer or an authorized repair center. Do not attempt to disassemble or modify the unit, as it contains sensitive high-voltage electronic components. Consult your dealer or an authorized repair center for technical assistance.

This equipment has been tested and complies with Class B digital device limits per Part 15 of FCC rules. These limits provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. Improper installation or use may cause harmful interference to radio communications. Users experiencing interference are encouraged to consult an experienced radio technician.

System Installation

Before starting:

To prevent short circuits, disconnect the battery terminal before starting.

Installation Guide - Double Din Fitting:

Caution:

1. This screen opens up. Install the unit within 30 degrees of the horizontal plane. Ensure the screen has enough room to fully open; restricting movement can damage the mechanism.
2. Consult your vehicle dealership before making any modifications to your car's body (e.g., drilling holes).
3. Use the included screws for installation. Improper hardware may result in damage.

Do not install the unit in any area where:

• It may obstruct the steering wheel and gearshift lever operations.
• It may obstruct the operation of safety devices such as airbags.
• It may obstruct visibility.

Installation kits:

• This unit conforms to the standard size and dimensions of a double DIN radio.
• Your vehicle may require a vehicle-specific or 3rd party double DIN installation kit.
• Consult your dealer or the nearest authorized repair center for technical assistance.

*Mounting Sleeve Bracket not included

*Ensure that the opening or closing of the in-dash unit, when mounted, does not interfere with your vehicle's interior panels, consoles, gearshifts, etc. Avoid using elongated screws when installing/securing your unit to the in-dash console to prevent damage.

Diagram Description: The diagram shows a 'Receiver Unit' being mounted into a 'Dashboard Console' using 'Mounting Brackets' and an 'Outer Trim Cover'. A 'Movable Display' is shown separately. A car battery with positive (+) and negative (-) terminals is also illustrated.

Installing Steps

Diagram Description: This section visually depicts the steps for installing the unit. It shows the removal of a front panel, disconnection of cables, and attachment of mounting brackets and the main unit.

Installing Steering Wheel Control

Note on Compatibility: This unit features a dual-wire code learning Steering Wheel Interface, adaptable to any vehicle with existing steering wheel controls. It can wire directly to your vehicle's steering wheel column and may require a 3rd party steering wheel control interface. Pyle Audio Technical Support can assist with interfacing into vehicles with existing controls. For help, contact Pyle Technical Support, providing your vehicle's Year, Make, Model, and options.

Key 1 and Key 2 wires are used for setting up steering wheel controls. The location of these wires in the steering wheel column varies by make and model.

Steering Wheel Controls

In the application, select the command, then press the corresponding button on the wheel to teach the unit. To enter the steering wheel menu, you will be prompted for a 4-digit passcode; enter '0000'. You can then manually program each desired option following the on-screen instructions. (Note: This feature is not compatible with all vehicle types).

Remote Control

Factory batteries may be depleted from extended storage. Replace batteries if the unit does not respond to the remote. Pyle remotes are universal and may not have all functions available on every radio model. If some functions do not respond, the remote is not defective. Contact Pyle parts at www.PyleUSA.com via "contact us" - "parts" if you believe your remote is defective.

BUTTON LAYOUT

FRONT PANEL AND BUTTONS

Diagram Description: The screen displays a weather widget showing "32°F" and "Cloudy 32°F~21°F" for New York, along with a Compass. Below this are icons for various applications.

Button & Feature Layout

Tips:

Navi: You might have several maps. Pressing the Navi button enters the default map. To change the map, go to Setting ➡️ Car setting ➡️ Navi setting.

TURNING POWER ON

1. Turn the engine key to the "ACC" or "ON" position.
2. Press and hold the power button for 3 seconds.
3. When the engine key is turned off, the unit turns off.

Status Bar (Top of screen): Swipe down for more options.

Diagram Description: The status bar shows time (3:20 PM), Wi-Fi signal, 3G signal, battery status, and icons for Home, Time display, Screen shot, Location, Bluetooth, and DVR.

APP SCREEN-INTERFACE LAYOUT

Diagram Description: The screen shows two main views. The first view is similar to the Front Panel display with weather and a compass. The second view shows a grid of application icons: Music, Video, PicView, Email, AUX, Browser, Clock, Downloads, Explorer, DVD, BT, and Settings.

Swipe left/right to access more apps.

Note: GPS, Navigation, and CD/DVD options may only be available on select head unit models. Visit www.PyleUSA.com for more details.

SETTINGS

1. Scrolling: Use the red bar to scroll through available options.
2. Turn on/off: Many settings can be toggled on or off.

*Note: Factory setup is not user-adjustable. Do not attempt to enter this setup menu.

SET TIME

1. Time Options: Select GPS time or network-provided time.
2. Date and Time: Use up/down arrows to set the date and time.
3. Select time zone accordingly.

Diagram Description: The 'Settings' screen shows options for 'Date & time', 'Set date', 'Set time', 'Select time zone', 'Use 24-hour format', and 'Choose date format'.

SOUND

1. Fade/Balance: Hold and drag to control audio output fade and balance.

AUX

Auxiliary input (rear RCA jacks) allow audio and video from external devices. Auxiliary output (rear RCA jacks) send audio and video to external devices.

1. Customization: Use settings to adjust and optimize display quality.

Note: The Auxiliary app displays "No Signal" if no video signal is connected. Screen controls are inactive until an external video signal is detected.

Diagram Description: The AUX screen shows "NO SIGNAL" and an icon representing audio/video connections.

*The parking brake must be wired to a grounding trigger for video pass-through; otherwise, a warning message will appear indicating video is disabled while driving.

CALENDAR

• Displays the day, month, and year.
• Use forward/back arrows to view past or future months.
• Selected dates are highlighted in blue.

Note: The Calendar app does not allow appointment entry. Dates must be set within system settings.

CALCULATOR

A handy app for simple calculations.

Diagram Description: The Calculator app screen displays a numeric keypad (0-9), operators (+, -, *, /), parentheses, a decimal point, and a 'DELETE' button.

EQ - EQUALIZER

Diagram Description: The EQ screen shows sliders for "USER", "Loud", and "SubWoofer". A "Sound" section displays multiple sliders, each labeled with a number from 0 to 0. A "Tip" box explains how to use the EQ.

Presets: Select one to automatically adjust the equalizer.

Adjustments: Hold and drag up or down to manually adjust the EQ by each frequency band.

RADIO

1. Scanning: Press, hold, and drag the slider to quickly tune the radio.
2. Current Station: The selected station displays in the center. Press forward/back arrows to change stations.
3. Favorite Stations: Press and hold one of the six preset slots to save a station.

Diagram Description: The Radio interface shows "Radio" and "3:22 PM". It displays frequency "87.50 MHz" with navigation arrows. Below are preset buttons (P7-P12) and band selectors (ST, LOC, FM, AM, Q).

SD - FLASH MEMORY FILE BROWSING

Warning: Do not attempt to browse files while operating the vehicle.

1. Browsing Files: File location is displayed. Use the "Back Arrow" ⬅️ to return to the previous folder.
2. Selecting Files: Files and folders are displayed. Select a folder and press the "check icon" ✔️ to open.

USB - FLASH MEMORY FILE BROWSING

Plug in flash drives to access music, video, and photos.

VIDEO

1. Brightness, Contrast, Hue: Press, hold, and drag to adjust display settings.
2. Presets: Select to automatically adjust display settings.

WALLPAPER

Note: Wallpapers can be imported from a flash drive or SD card. Check format sheet online for specs. 1. Browse: Use left/right arrows ⬅️➡️ to select wallpaper. 2. Select: Press OK to select wallpaper.

THIRD PARTY APPS

For detailed operation instructions for 3rd party Apps (e.g., Google Maps, YouTube), please contact the respective App provider.

TROUBLE SHOOTING

Q: Unit doesn't power up
A: Use a multi-meter to check for 12V+ on red and yellow wires. Check for proper Ground on the black wire.

Q: My video does not play
A: Attach the "PARK" wire to the parking brake. Grounding this wire enables video playback.

Q: Reverse camera does not come up on the screen
A: Attach the "BACK UP CAMERA" wire to the reverse tail light 12V+. Ensure the camera is sending a video signal.

Q: Can I set up steering wheel control?
A: Key 1 and Key 2 wires need to be wired to your vehicle's steering wheel column.

Q: The time I set is not saved after device reboot
A: Check if other settings are saved. If not, verify the yellow memory wire is attached to a 12V+ constant source. Turn off GPS auto-update: Go to Radio settings ➡️ Set Time ➡️ Switch off auto-update.

Q: My GPS gets no reception.
A: Check antenna connection. Mount the antenna directly to your vehicle (magnetic mounting boosts reception). Check alternate antenna placement to test for interference.

Q: How do I turn up GPS instruction volume?
A: Go to Navi ➡️ Settings ➡️ Sounds ➡️ Set GPS voice level to max. Adjust radio volume accordingly.

Q: How do I update my map card?
A: The radio will notify you when a map update is available. Request a new map card from Pyle parts department via www.PyleUSA.com "Contact Us" ticket.

Q: Where can I download firmware updates?
A: www.PyleUSA.com

Q: How do I set the time?
A: System setting, set time.

TROUBLE SHOOTING (Continued)

Q: How do I use / set-up RDS?
A: (*Traffic and weather feature only available in Europe)

Q: My Bluetooth microphone is not working as expected
A: Check that nothing covers the microphone port. Test proximity to the mic. Ensure phone connection is good. Verify the call recipient's speaker volume is appropriate. Check for excessive background noise. Note: The built-in mic cannot be changed, replaced, or upgraded.

Q: I am having trouble setting up Bluetooth
A: Ensure your device is Bluetooth 4.0+ compatible. Try pairing with alternate devices. Clear your device history in Bluetooth settings and attempt to pair again.

Q: My Map card no longer loads (COCKPIT ERROR DISPLAYED)
A: This is likely a map software bug. Contact Pyle Tech Support at www.PyleUSA.com. Alternatively, try fixing the software: Insert GPS card into computer, open text file under Primo\save\profiles\01\system.ini, and edit the file to return the cockpit type to "1". Deleting the profile folder resets settings to cockpit number 1.

Q: How do I play video files? My unit cannot read my digital video files.
A: Ensure the SD card is compatible. Check the file format; you may need to convert the video file to an alternate format.

Q: My unit shows 5 circles and will not load
A: Your unit requires touchscreen calibration. Enter the 'Touch Screen Calibration Menu'. An "X" will appear in numbered circles; press the center of each "X" as it moves. If calibration fails, the process may restart.

WIRING - BACK PANEL

Diagram Description: The back panel of the unit is shown with various ports labeled: GPS ANT, DTV ANT (optional), RADIO ANT, RADIO, VOUT1, VOUT2, DIV, DTV, GPS, R_IN, F_OUT, R_OUT, F_IN, R_IN, POWER. A wiring harness diagram shows connections for WIFI ANTENNA, 3G/USB/DVR (blue/black), SUBWOOFER OUTPUT, BT/MIC, FL OUT, RL OUT, FR OUT, RR OUT, ATV ANT (optional). It also details connections for Steering Wheel Key 1 & 2, Amplifier Remote Trigger, Illumination Control, GND, Ignition Accessory, Battery Memory, CANBUS TXD/RXD, Reverse Camera Trigger, Parking Brake Trigger, and Power Antenna Trigger.

Port Labels:

• A. Video Input
• B. Video Output 1
• C. Video Output 2
• D. Left Audio Input
• E. Front Left Audio Output
• F. Rear Left Audio Output
• G. Right Audio Input
• H. Front Right Audio Output
• I. Rear Right Audio Output

WIRING - COLOR WIRING

Diagram Description: This diagram illustrates the color-coded wiring connections for the unit, including SW KEY, AMP REMOTE TURN ON, ILLUMINATION, ACC, FUSE, POWER B+, GROUND, BACK UP CAMERA, PARKING, AUTO ANTENNA, SW-GROUND, CAM VIDEO IN, CANBUS Interface, and speaker outputs.

*Brown wire tells the monitor when to activate and display rearview camera on the display (optional).

DVD

The DVD app opens only when a compatible DVD disc is detected.

1. Scrubbing

Press and drag along the timeline to skip through DVD playback. (Note: DVD formatting may not allow scrubbing through previews and warnings).

2. Menu Options & Controls:

Diagram Description: The DVD playback screen shows controls for Angle, Sub-T (subtitles), Audio, and Menu. It also displays the current time (3:45 PM) and Bluetooth status.

BLUETOOTH

The Bluetooth app allows pairing with compatible devices for calls and music playback. Ensure Bluetooth is enabled on your phone and disconnected from other devices before pairing.

In the Bluetooth app, press the "Gear" icon ⚙️ to access settings, then the "Magnifying glass" icon ? to enter pair mode. The radio will display "searching" and list nearby compatible devices.

• Select your phone from the list and tap again to initiate pairing.
• Your phone may prompt for a PIN; enter "0000".
• Confirm that "CAR_KITT" shows as connected on your phone.

Note: Once paired, other functions within the Bluetooth app are available.

Left hand column:

• Keypad Icon ?: Dial using the radio's number pad.
• Address Book Icon ?: Display phone's contact list (import using "Download" icon).
• Phone Icon ?: View incoming/outgoing call log.
• Gear Icon ⚙️: Phone pairing and selection options.
• Headphones Icon ?: Music playback controls.

Right hand column:

• Trash Icon ?️: Delete selected entry.
• Download Icon ⬇️: Download contact data to address book.
• Speaker Selection Icon ?: Switch between car and phone speaker/mic.
• Function Icon: Search/disconnect/connect/delete.

Diagram Description: The screen shows a dial pad with numbers 0-9, *, #, and call/end buttons. It also shows Bluetooth status and time (8:02 PM).

HOW TO ACCESS INTERNET

You have three ways to access the internet:

1. Use a 3G dongle: Insert a USB 3G dongle into a rear USB port. The 3G signal icon will appear on the status bar.
2. Use your smartphone as hotspot: Turn on your smartphone's hotspot, then turn on Wi-Fi on the car unit and connect to your phone's hotspot.
3. Use car Wi-Fi router or portable Wi-Fi router: Use these as a hotspot for internet access.

VEHICLE BLACKBOX DVR

Video Recording

1. Press the record icon ? to start recording; a red indicator ? shows when recording.
2. The upper left corner displays the recorded video time.

Setting

1. Press the settings icon ⚙️ to enter DVR settings.
2. Settings are unavailable while recording.

Diagram Description: The DVR screen shows "Routine setup", "Video setup", and "Output setup" options. "Auto record at power on" is checked. Buttons for "Restore", "Confirm", and "Cancel" are present.

Routine Setup

• Recording mode: Record video only.
• Auto record at power on: If checked, recording starts automatically after power on.

Video Setup

• Resolution: Video resolution (effective pixels horizontally and vertically).
• Rate: Video bit rate (data per second). Higher bit rate provides better picture detail and less quality loss.

Output Setup

• Auto Segmentation: Set video file split time to manage memory consumption and playback. High-resolution recording creates larger files.
• Auto Delete Old Video: Automatically deletes the oldest recorded video when storage is full.
• Storage Location: Path for video files (e.g., External memory/DCIM/Dvr). 'Not available' prompt appears if no external memory is inserted.

Restore to Default

1. After changing camera types, original parameters may not apply. Restore default parameters if recording fails.
2. If recording fails due to setting changes, try restoring the default state.

Video List

1. Press ◀️ or slide the screen to enter the DVR video list.
2. Each list item shows a video preview thumbnail. File name and time period are displayed.
3. Short press a video to play; long press to delete.

INSTALLATION

Diagram Description: The diagram shows the installation of the head unit into a car dashboard. It also illustrates the connection of various cables to the back of the unit, including WIFI ANTENNA, BT/MIC, SUBWOOFER OUTPUT, 3G/USB/DVR, and DVR.

REAR VIEW BACKUP CAMERA INSTALLATION

Please read all installation instructions carefully before installing. Improper installation voids the manufacturer's warranty. These instructions are guidelines; consult an experienced technician if uncomfortable. Read the safety information in this manual before use. Alterations without authorization may invalidate your right to operate the equipment.

WARNING: Failure to follow these warnings may result in serious injury or property damage. Pay close attention and exercise utmost care.

• The Digital Backup Camera is an aid for detecting hazardous conditions and obstructions. Always drive safely and properly; it is not a substitute for safe driving practices.
• Never back up solely by looking at the monitor. Always check behind and around the vehicle. Back up slowly and with caution.
• Do not depend entirely on the Backup Camera. The displayed image may differ from actual conditions due to wide-angle lens distortion. Use it as an aid and follow intended driving practices.
• The low lux lighting performance feature is an aid. Always use your own eyes to confirm surroundings, as the image may not be well-lit or entirely visible. Proceed with caution and perform double-checks.
• The camera's displayed area is limited; it does not show objects close to or below the bumper, or outside its view. The view can change with vehicle orientation or road conditions.
• Ensure the camera is functioning properly, positioned, and securely mounted every time you operate the vehicle.
• Ensure your trunk or hatch operates correctly before and after installation.
• Proceed with caution when cleaning around the camera. Avoid excess water exposure.
• Keep the camera clean and unobstructed.
• Follow all traffic laws and motor vehicle regulations.
• Consult local laws for installation/use restrictions.
• A Backup Camera System does not eliminate blind spots. Always drive with caution and follow traffic laws.

System Installation and Wiring

Note: Camera system installation on diesel vehicles may require different wiring.

Caution: Connecting to other electrical systems can damage your vehicle. Contact the manufacturer if unsure of your vehicle's system type. Refer to model power requirements before installation.

QUICK INSTALLATION

This rearview backup camera system includes camera and installation wiring. The camera is preferably mounted at the rear of your vehicle (above the license plate). The kit includes necessary wiring and connectors for typical connections; additional materials may be needed for secure performance.

Camera Connection

Connect the camera using the included DC 12V power cable to the vehicle's reverse tail light (positive 12V). Connect the black wire to ground. This cable connects to the camera, supplying power.

Next, run the included yellow RCA video connector cable from the camera to your display monitor. The yellow RCA cable retrieves the video signal when the vehicle is put into reverse gear.

Installation Transcript

1. Locate the reverse taillight wiring behind the vehicle's reverse light (may require removing an interior panel). Connect the included 12V DC power cable to the reverse light.
• Connect the power cable's Red wire to the vehicle's reverse light positive wire.
• Connect the power cable's Black wire to the vehicle's reverse light negative wire.
2. Connect the camera to this reverse light connection and mount it in the desired location.
3. Run the RCA video cable from the camera to your compatible video display monitor.

* Run cables unobtrusively. Secure all cables and wiring to prevent damage from vibrations or bumpy driving.

* Ensure wires are safely and securely connected with proper isolation.

Additional Notes:

• Determine the best camera location (preferably above the license plate).
• Leave some slack in connection cables to allow for camera positioning adjustments.
• Test the camera before use. Placing the vehicle in reverse should display a picture in the rearview mirror assembly.

Angle Adjustable Camera Lens

• Two screws on the camera housing lock the lens angle. Loosen these screws to adjust the angle, then tighten securely.
• Be sure not to overtighten the screws.

Diagram Description: The diagram shows the camera lens with two adjustment screws. It also illustrates the camera's connection via RCA Video to a Display Monitor and Power Cable to the vehicle's Reverse Lights.

PHONE LINK SOFTWARE

This phone link software is developed by a 3rd party developer and provided free of charge. As mobile phone manufacturers upgrade their systems, this device may not be compatible with newer operating systems. Pyle is not responsible for such incompatibilities.

1. Product Introduction

Easyconnected, developed by Wuhan Carbit Information Co., Ltd., enables interconnection between a mobile phone and a vehicle navigator via USB or Wi-Fi. It projects the phone screen to the navigator, allowing phone operation on the navigator, transforming it into an intelligent vehicle-mounted system.

2. Product Support Information

2.1. Supported Vehicle Navigator

Easyconnected offers WinCE, Android, and QNX navigator versions.

2.2. Supported Mobile Phone

Mobile phones on Android and iOS platforms can connect. Supported versions are:

3. Important

3.1. Enable USB debugging

Before connecting Easyconnected to an Android mobile phone, ensure "USB Debugging" is enabled in the phone's settings. Refer to section 7.1 for instructions.

3.2. Select USB cable

Use your original USB data cable or one with shielding for stable connection performance.

3.3. Transmit mobile phone sound to vehicle navigator

Transmit sound for calls and music playback via A2DP protocol. Ensure Bluetooth is connected before using Easyconnected.

3.4. Mobile Phone Compatibility

Due to Android system variations and manufacturer customizations, compatibility with all Android phones cannot be guaranteed. The provided list of verified phones is for reference only.

3.5. Description of Support to Android 2.3.x

Functions may fail on systems below Android 2.3.X, such as video playback through double screen interaction.

3.6. Difference in Connection Performance

Connection performance may vary depending on the mobile phone's capabilities.

4. Legal Statement

Read and understand this statement before use. Use of the software implies acceptance of its terms.

1. Operate this software only when the car is parked or before it runs. Operating while driving is the user's responsibility for any resulting accidents.
2. Select traffic routes according to actual conditions; map navigation is for reference only. Users are responsible for any traffic law violations.
3. Use this software after registration. Authorize data collection for product improvement and new function development.

5. Connection and Use

5.1. Functions of Easyconnected versions Easyconnected Android (support Android vehicle navigator)

Diagram Description: The screen shows connection options: Android USB, Android WiFi, iPhone WIFI. Text prompts "Please select connection mode".

Start Easyconnected software and select connection mode:

1. USB connection to Android mobile phone.
2. Wi-Fi connection to iOS mobile phone.
3. Wi-Fi connection to Android mobile phone.

Product Features

Headunit Receiver:

• Hi-Res 10.1"-inch Digital Display
• Built-in Android OS Computer
• Integrated Google Play Store
• Download Apps, Surf the Web, Play Games
• Support Download of Google Maps & GPS Navigation Apps
• Touch Screen Control Operation
• Bluetooth & WiFi Wireless Streaming
• User-Friendly UI Interface
• Full HD 1080 Support
• Digital File Playback: Audio Video & Image Files
• USB Flash Drive Reader
• CD/DVD Player
• 16 GB Built-in Flash Memory
• AM/FM Radio with 30 Station Memory
• Video Aux (RCA) Input/Output Connector Jacks
• Rearview Backup Camera Support
• Audio Aux (RCA) Input & Pre-Amp Output Jacks
• Interface: Subwoofer Output, 2 x USB/DVR/3G Antenna
• Picture Configuration: Brightness Contrast Color
• Customizable EQ Audio Controls
• Android & Apple iOS Support

Android OS Computer:

• Touchscreen 'Tablet-Style' Functionality
• WiFi Wireless Streaming Ability
• Surf the Web & Download Apps
• Multi-Touch Capacitive Display Screen
• 3G WiFi Mobile HotSpot Capability
• Smart Device MirrorLink/AirPlay Support
• OS Version: Android 6.0
• Processor: Octa-Core ROCKCHIP 1.5GHz Cortex A-53

Bluetooth Connectivity:

• Built-in Bluetooth for Wireless Music Streaming
• Built-in Microphone for Hands-Free Calling
• Compatible with All Your Favorite Bluetooth Devices (Smartphones, iPhones, Android, Tablets, Laptops, etc.)
• Convenient Contact List Import Ability
• Digital Phone Dial Pad Display
• Bluetooth Version: 4.1

What's in the Box:

• Android Stereo Receiver
• Power & Wiring Harness
• Bluetooth Microphone
• (2) USB Extension Cables
• Mounting Brackets & Hardware
• Remote Control
• DVR Dash Cam
• Backup Camera

DVR Dash Cam:

• Interior Front Windshield Mountable
• Hi-Res Full HD Video Recording
• Angle Tilt & Rotation Adjustable
• Extra Compact & Unobtrusive Design
• Simple Connection to Headunit via USB
• Easy File Saving & Sharing

Rearview Backup Cam:

• Marine Grade Camera Construction
• Waterproof & Fog Resistant (IP67 Rating)
• Low Lux Light Performance (0.2 LUX)
• Built-in Distance Scale Lines
• Preferably Mounted Above the Rear License Plate
• Tilt Adjustable Camera Lens Angle
• 420 TVL Horizontal Resolution
• True Color Reproduction
• Total Pixels: 656 x 492
• Resolution: 420 TV Lines
• Viewing Angle: 170 Degree
• Auto White Balance
• Video Output: 1.0V PP-75 Ohm
• Power Supply: DC 12V 200mA
• 17 Foot male to male RCA Video Cable
• Includes All Necessary Installation Cables/Wires
• Dimension (L x W x H): 10.0" x 1.3" x 1.3"-inches

Receiver Technical Specs:

• Double DIN Size Universal Standard
• Power Output: 4 x 80 Watt (320 Max.)
• Wide Screen TFT - LCD Display
• Aspect Ratio 16:9 High Definition
• Pixel Resolution: 1024 x 600 Pixels
• Bluetooth A2DP Support
• Steering Wheel Button Control Support
• Impedance: 4 Ohm
• Video System: NTSC/PAL (Auto Recognition)
• Response Time: Up 30 ms Down 50 ms
• AM/FM-MPX 2 Band Radio - Auto Store Preset Scan
• Anti-Shock Mechanism-ESP Function
• LO/DX & ST/MO Selector
• Selectable USA/Europe Radio Frequency
• File Compatibility: JPEG MP3 MP4 AVI WAV and More
• Multimedia Disc Support DVD/VCD/CD/CD-R/CD-RW
• Maximum USB Flash Memory Card Support: 64GB
• Working Voltage: DC 12V
• In-Console Dimensions (L x W x H): 6.97" x 6.46" x 3.94" -inches