Pyle PLRUB69 6.5" Touchscreen Double DIN Stereo Receiver Headunit
This document provides information on the Pyle PLRUB69 6.5-inch Touchscreen Double DIN Stereo Receiver Headunit. It covers precautions, wiring, controls, general operation, multimedia playback, Bluetooth functionality, settings, and troubleshooting.
Precautions
To ensure safe and optimal operation, please observe the following precautions:
- Avoid operating controls while driving.
- Keep volume at a level that allows external sounds to be heard.
- Moisture may form on the unit in cold conditions; allow it to acclimate or wipe discs with a soft cloth.
- Rough roads may cause disc skipping.
- Do not open the case or attempt to repair the unit yourself; contact a service center.
- This equipment complies with FCC Rules Part 15 for digital devices, designed to provide reasonable protection against interference.
Wiring Diagram
The back panel of the unit features various connection ports:
- A. Video Input
- B. Video Output 1
- C. Video Output 2
- D. Left Audio Input
- E. Front Left Audio Output
- F. Rear Left Audio Output
- G. Right Audio Input
- H. Front Right Audio Output
- I. Rear Right Audio Output
The unit also includes connections for:
- Radio Antenna
- USB
- BT/MIC
- Subwoofer Output
Detailed wiring connections include:
- Steering Wheel Control Key 1 (Green/White)
- Amplifier Remote Trigger 12V+ (Blue/White)
- Illumination Control 12V+ (Orange)
- GND (Black)
- Ignition Accessory (Red)
- Battery Memory 12V+ (Yellow)
- Canbus TXD Interface (Orange)
- Canbus RXD/R (Brown)
- Reverse Camera Trigger 12V+ (Brown)
- Parking Brake 12 Volt - Ground Trigger (Pink)
- Power Antenna Trigger 12V+ (Blue)
- Steering Wheel Key 2 (Gray/White)
- Rearview/Backup Camera RCA Input (Yellow)
Speaker connections are color-coded:
- Rear Right Speaker + (Purple) / - (Purple/Black)
- Rear Left Speaker + (Green) / - (Green/Black)
- Front Right Speaker + (Gray) / - (Gray/Black)
- Front Left Speaker + (White) / - (White/Black)
Color Wiring Summary
| Wiring | Description |
|---|---|
| Radio Antenna | Radio antenna receptacle |
| Subwoofer Output | Pre amp subwoofer output (5V) |
| Audio / Video Input | Auxiliary input for external hardware |
| Audio / Video Output 1 | Connect to headrest display (Optional) |
| Audio / Video Output 2 | Connect to headrest display (Optional) |
| Green/White (SW KEY) | Steering wheel control Key 1 interface wire |
| Blue/White (AMP REMOTE TURN ON) | DC 12 + Volt Remote turn on trigger for external amplifier |
| Orange (ILLUMINATION) | 12 volt + trigger dash board illumination |
| Brown (BACK UP CAMERA) | 12 volt + trigger from reverse lights |
| Pink (PARKING) | Connect to parking brake ground. Disables video play unless grounded |
| Blue (AUTO ANTENNA) | 12 volt + trigger output |
| Gray/White (SW-GROUND) | Steering wheel control Key 2 interface wire |
| Black (RCA) (CAM VIDEO IN) | Camera RCA video input for use with rearview camera |
| Red (ACC) | Ignition Accessory 12V+ |
| Yellow (FUSE/ POWER B+) | Connect to (+) side of car battery |
| Black (GROUND) | Connect to (-) side of car battery |
| Orange (CANBUS INTERFACE TXD) | Vehicle Diagnostic CANBUS Interface |
| Brown (CANBUS INTERFACE RXD/R) | Vehicle Diagnostic CANBUS Interface |
| Purple (Speaker Rear R) | Rear right speaker (+ Purple, - Purple/Black) |
| Green (Speaker Rear L) | Rear left speaker (+ Green, - Green/Black) |
| Gray (Speaker Front R) | Front right speaker (+ Gray, - Gray/Black) |
| White (Speaker Front L) | Front left speaker (+ White, - White/Black) |
Note: The brown wire (BACK UP CAMERA) activates the rearview camera display when connected to reverse lights.
Remote Control Functions
The remote control provides access to various functions:
- [1] Power On/Off
- [2] EJECT: Opens the motorized unit.
- [3] DN: Down the screen angle.
- [4] Next Track
- [5] VOL-: Decrease volume.
- [6] Play/Pause
- [7] Stop / BAND
- [8] Previous Track
- [9] Navigation Arrows: Left/Right/Up/Down for selection.
- [10] AMS: Automatic station search in radio mode.
- [11] Confirm
- [12] OSD: File information display.
- [13] Phone / ZOOM: Make a call or zoom image.
- [14] AUDIO: Select audio mode (Left/Right/Stereo).
- [15] Numeric Keys (0-9)
- [16] HOME: Return to homepage.
- [17] SRC: Source conversion.
- [18] MENU: Access system main interface.
- [19] UP: Up the screen angle.
- [20] MUTE: Mute audio.
- [21] VOL+: Increase volume.
- [22] SEL: Enter menu.
- [23] Hang Up / Backspace
- [24] PBC: Playlist control.
- [25] SETUP: Enter system setting menu.
- [26] SEARCH: Search for playback.
- [27] REPEAT: Repeat playback.
- [28] ANGLE: Switch viewing angle.
General Operation
The main interface provides access to various functions:
- Radio: Select radio region (Europe, America, China, Russia, Japan, RDS on/off).
- USB
- SD Card
- Bluetooth (BT): Connect with mobile devices for music playback and calls.
- AUX: Auxiliary input for external media sources.
- Sound: Adjust volume and mute.
- Display: Adjust display settings.
- Touch Calibration: Calibrate the touchscreen.
- Time Setting: Set the system time.
- Steering Wheel Control (SWC): Set steering wheel control presets.
Note: Icons for USB, SD, iPod, and camera will show 'No Device' if not connected. Display settings are only available when audio or video is playing.
Car Logo Customization
Preset car logos can be selected to match your vehicle's brand.
Steering Wheel Control Setup
Customize steering wheel buttons by following the system's learning process. Press the desired button on the steering wheel and then the corresponding function on the screen.
Touchscreen Calibration
Follow on-screen prompts to calibrate the touchscreen for accurate input.
Power Saving Mode
The unit supports a power saving mode.
AUX Input
Connect external audio/video sources like cameras, game consoles, or navigation boxes via the 3.5mm auxiliary input.
Rear View Camera
When a reverse camera is connected, the system automatically displays the rearview when the vehicle is put into reverse. It reverts to the previous mode upon completion.
Bluetooth Operation
Pair your mobile device via Bluetooth to enjoy music and hands-free calling.
Bluetooth Music
Ensure your phone supports the A2DP profile. Select 'BT Music' from the main interface to play music stored on your phone. Music playback may require selecting the music player on your phone or using the unit's interface.
Bluetooth Setup Menu
| Settings | Default | Options | Function |
|---|---|---|---|
| Bluetooth | On | Bluetooth standby when the device is turned on. | |
| Device | Not Paired | Device Name | Displays the connected Bluetooth device name. Press to see a list of available devices. |
| Connect | Auto | Automatically connects to the same device after the first pairing. | |
| Auto Answer | Manual | Manual / Auto | Manual: Requires pressing the talk button to answer. Auto: Answers all incoming calls automatically. |
Note: Compatibility may vary between Bluetooth devices. Some noise may be present during hands-free operation depending on the mobile device and network.
Settings Menu
The settings menu allows customization of various functions:
- Radio Setting
- Card Setting (SD Card)
- Audio Setting: Adjust Balance and Fader using sliders.
- USB Setting
- Bluetooth Setting
- Display Setting: Adjust brightness, contrast, color, etc.
- Time Setting: Set Day, Month, Year, Hour, and Minute.
- Language Setting: Select from available languages (English, Spanish, Deutsch, Russian, Portuguese, French, Chinese, etc.).
- SWC Setting: Configure steering wheel controls.
- Factory Setting: Reset the unit to factory defaults, change password, adjust settings, change logo, or restore defaults.
Troubleshooting
| Phenomenon | Reasons | Solutions |
|---|---|---|
| Not operating | Blown fuse, overloaded voltage, incorrect operation, wrong wiring. | Replace fuse, adjust voltage, reset system, check wiring diagram. |
| Remote control doesn't work | Dead battery, incorrect battery placement. | Replace battery, reinstall battery correctly. |
| No or low sound | Disconnection, low volume, silence wire issue, speaker fault, incorrect balance/fader, speaker earthing. | Check connections, increase volume, reconnect silence wire, replace speaker, adjust balance/fader, insulate speaker connections. |
| Inferior sound quality / Distortion | Poor quality disc, speaker impedance mismatch, speaker open circuit. | Use genuine discs, replace speaker, check speaker connection. |
| Machine resets itself when shut down | Incorrect ACC and B+ connection. | Check and reconnect ACC and B+. |
| Turnover screen does not open automatically | Auto Open setting is OFF. | Set Auto Open to ON. |
| No image (e.g., rearview camera) | Incorrect brake wire connection, not in brake state. | Connect brake wire correctly, ensure brake state. |
| Unstable image output | Incompatible video setting, incorrect video signal line connection. | Adjust system video setting, check video signal connection. |
| Stretched or compressed images | Inappropriate image proportion setting. | Adjust image setting. |
Radio Troubleshooting
- Weak signal: Ensure auto antenna is fully extended; disable LOC function.
Disc/Card Reading Troubleshooting
- Breakdown during playing: Clean or replace disc; replace or choose a different file.
- Error or not operating: Hold EJECT for 5 seconds to reread the device.
- Disc cannot enter: Remove existing disc or ensure it's fully accepted.
- Disc does not play: Check disc compatibility (area code, orientation), or lock function settings.
- SD card unreadable by device: Compatibility issues with SD card brands. Supported brands include SanDisk, KingMAX, Kingston, Panasonic, Apacer, etc.
- Non-repeat and search function while playing VCD: PBC service is functioning; shut down PBC service.
Note: This device does not support DVD playback.
Systematic Parameter
Specifications
- Working Voltage: DC 12V (Range: 10.8V - 16V)
- Max Current: 10A
- Installation Angle: Less than 30 degrees tilt.
- Supported Media Formats:
- Audio: MP3, WMA
- Image: JPEG (up to 1024x768)
- Video: AVI, RMVB, MPG, DAT
- Power Output: 4 x 80W
- Impedance: 4 ohm
- SNR: 70dBA
- Frequency Response: 20Hz - 20kHz
Video
- Standards: NTSC, PAL (Auto recognition)
- Output/Input: 1Vp-p (75 ohm)
FM Radio
- Frequency Modulation: 87.5 MHz - 108.0 MHz (Europe)
- Sensitivity (30 dB): 10dBu
- SNR (50 dB): 15dBu
- Frequency Sound Range: 30Hz - 15kHz (+3 dB)
AM Radio
- Frequency Range: 522 KHz - 1620 KHz (Europe)
- Sensitivity (SN=20 dB): 20dBu
- Image Rejection: 60dB
- Frequency Response: 50Hz - 2kHz (+-3 dB)
Display
- Screen Type: TFT
- Response Time: Up = 30ms, Down = 50ms
- Angle Range: Depression = 65°, Elevation = 40°, Left/Right Vision = 65°
Environment Temperature
- Operation Temperature: -20°C to +70°C
- Maintenance Temperature: -30°C to +80°C
- Operating Humidity: 45% - 80% RH
- Maintenance Humidity: 30% - 90% RH
Pyle USA, 1600 63rd Street, Brooklyn, NY 11204
