Assembly Instructions

Important Safety Information

! WARNING!

Children have died from furniture tipover. A fixed wall device is included with this product. You must install the fixed wall device according to these instructions to minimize the risk of furniture tipover. If you have any questions about this product or the fixed wall device, please contact us immediately.

Never allow children to climb or hang on furniture, including drawers or cabinet doors.

In addition to installing the restraints, to help prevent tip-over:

• Never put a TV or other heavy objects on top of this product.
• Do not stand on the product.

▲ WARNING

Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.
• Do not defeat or remove the drawer interlock system.

This is a permanent label. Do not remove!

Product Overview

The product is a furniture unit with doors and drawers, identified by the model number H24048.

Diagram of the assembled unit: A three-dimensional line drawing shows a cabinet with two doors on the left, and three drawers on the right. The overall shape is rectangular.

Parts List

The following parts are included in the package:

Hardware List

Assembly Steps

1. Step 1: Prepare Panels

   Attach Cam Bolts (A) to panels 1 and 2 as shown. Insert Cam Bolts (A) into the pre-drilled holes on panels 1 and 2. Insert Dowel Pins (C) into the corresponding holes on panel 2. Ensure Cam Bolts are tightened securely. Rotate panel 2 by 180 degrees. Attach Cam Bolts (A) to panel 2. Insert Dowel Pins (C) into panel 2.

   Diagram: Shows panels 1 and 2 with arrows indicating where to insert Cam Bolts (A) and Dowel Pins (C). A circular inset shows a close-up of a Cam Bolt being screwed in. Another circular inset shows Dowel Pins being inserted.

2. Step 2: Assemble Side Panels

   Attach Cam Bolts (A) to panels 3, 4, and 5. Insert Dowel Pins (C) into panels 3, 4, and 5. Ensure all Cam Bolts are tightened. Rotate panel 5 by 180 degrees. Attach Cam Bolts (A) and Dowel Pins (C) to panels 3, 4, and 5 as indicated.

   Diagram: Shows panels 3, 4, and 5 with Cam Bolts (A) and Dowel Pins (C) being inserted. Arrows indicate the direction of rotation for panel 5.

3. Step 3: Attach Drawer Slides to Drawer Components

   Insert Dowel Pins (C) into panel 10. Attach Drawer Slides (K) and (L) to panels 7 and 8 using Screws (H), (J), and (K). Attach Drawer Slides (K) and (L) to panel 10 using Screws (C).

   Diagram: Shows panel 10 with Dowel Pins (C) inserted. Insets show Drawer Slides (K) and (L) being attached to panels 7 and 8 with screws, and to panel 10 with screws.

4. Step 4: Attach Drawer Slides to Cabinet Base

   Ensure the arrow on Screw (B) aligns with the hole on the side. Attach Drawer Slides (B) to panels 5 and 10 using Screws (B).

   Diagram: Shows panels 5 and 10 with Drawer Slides (B) being attached using Screws (B). An inset shows a close-up of the screw alignment.

5. Step 5: Assemble Drawer Box

   Attach Drawer Slides (B) to panels 2, 9, and 10 using Screws (B).

   Diagram: Shows the partially assembled unit with panels 2, 9, and 10 being connected using Drawer Slides (B) and Screws (B).

6. Step 6: Continue Drawer Assembly

   Attach Drawer Slides (B) to panel 11. Attach Drawer Slides (D) and (E) to panels 4 and 5. Attach Drawer Slides (H) to panel 11.

   Diagram: Shows the unit with panel 11 being attached. Insets show Drawer Slides (D), (E), and (H) being attached to various panels.

7. Step 7: Attach Drawer Slides to Cabinet Sides

   Attach Drawer Slides (B) to panels 2, 10, and 11.

   Diagram: Shows the unit with Drawer Slides (B) being attached to panels 2, 10, and 11.

8. Step 8: Attach Drawer Slides to Cabinet Top and Bottom

   Attach Drawer Slides (B) to panels 3, 4, and 5. Attach Handles (M) to the drawer fronts.

   Diagram: Shows the unit with Drawer Slides (B) being attached to panels 3, 4, and 5. An inset shows a Handle (M) being attached to a drawer front.

9. Step 9: Assemble Drawers

   Assemble the drawer boxes using panels 14, 15, 17, and 18. Attach Drawer Slides (F) and (G) to the drawer boxes. Attach Drawer Slides (H) and (K) to the drawer boxes. Attach Drawer Slides (N) to the drawer boxes.

   Diagram: Shows the assembly of drawer boxes using various panels and hardware. Insets show the attachment of drawer slides and handles.

10. Step 10: Attach Doors and Drawer Slides

    Attach doors 6 and 7 to the cabinet using hardware (H) and (L). Attach the remaining drawer slides (H) to the cabinet.

    Diagram: Shows the cabinet with doors 6 and 7 being attached. Insets show the attachment of hardware and drawer slides.

11. Step 11: Install Drawer Slides

    Attach drawer slides (O) and (P) to the drawer interiors and cabinet frame.

    Diagram: Shows drawer slides (O) and (P) being attached to the inside of the cabinet and drawers.

12. Step 12: Secure to Wall

    Use the provided Wall Anchor (Q) and appropriate hardware (not included) to secure the unit to the wall to prevent tip-over. Follow the instructions for wall anchoring.

    Diagram: Shows the assembled unit and the Wall Anchor (Q) with an arrow indicating it should be attached to the wall. Insets show the process of wall anchoring.

Hardware Installation Demonstration

Step I: Shows a hand inserting a screw with a tool. Text indicates "not included" for the tool.

Step II: Shows various screws and fasteners being attached to a panel.

Step III: Shows a screw being inserted with a circular arrow indicating rotation, and a checkmark indicating correct placement.

Step IV: Displays a QR code with the text "Scan QR code for assembly video".