GCHG1090 Wall Shelf Assembly Instructions
Parts List
| Part Label | Quantity | Description |
|---|---|---|
| A | 21 | 8 x 30 mm screw |
| B | 14 | Screw |
| C | 2 | Dowel |
| D | 6 | 3.5 x 16 mm screw |
| E | 2 | 4 x 10 mm screw |
| F | 12 | 4 x 10 mm screw |
| G | 1 | 2.5 mm screw |
| H | 2 | Screw |
| I | 4 | 4 x 12 mm screw |
| J | 2 | 5 x 50 mm screw |
| K | 1 | 3 mm screw |
| L | 14 | 13 x 15 mm dowel/peg |
| M | 1 | 4 mm dowel/peg |
| N | 2 | Screw |
| O | 6 | Cam lock/fitting |
| P | 2 | 4.5 x 60 mm screw |
Assembly Steps
Step 1
Prepare the main panels. Insert dowels (L, M) and cam lock fittings (O) into the designated holes on the large main panel and side panels as indicated. Various screws (A, B, D, E, F, G, H, I, J, K, N, P) are listed for assembly. The diagram shows a large panel with multiple types of hardware being inserted into pre-drilled holes.
Step 2
Attach a smaller panel to the main panel using screws J (2x 5x50mm) and K (1x 3mm). The diagram shows this connection being made.
Step 3
Attach one of the side panels to the main assembly. This step involves inserting dowels (L) and securing with cam locks (O). The diagram illustrates this process.
Step 4
Attach the second side panel to the main assembly, mirroring Step 3. This involves inserting dowels (L) and securing with cam locks (O). The diagram shows this attachment.
Step 5
Attach the back panel. This may involve sliding it into grooves or securing it with screws (F). The diagram shows the back panel being fitted into the structure.
Step 6
Attach the top or bottom panel to the structure. This step uses dowels (L) and cam locks (O) for securing. The diagram illustrates this connection.
Step 7
Insert a shelf into the assembled unit. The shelf is likely supported by dowels (L) and secured with cam locks (O) or similar fittings. The diagram shows the shelf being placed and secured.
Step 8
Secure the back panel, possibly with screws (F). The diagram shows the back panel being fastened to the main frame.
Step 9
Attach a door or flap using hinges. The diagram shows a hinge mechanism with a "CLICK" indicator, suggesting a snap-fit or easy attachment. Part N (screws) is also shown.
Step 10
Complete the assembly by attaching any remaining components, such as a drawer or final shelf, using screws P (2x 4.5x60mm). The diagram shows the final assembly stage.
